• Journal of the Korean Statistical Society
• /
• 제30권1호
• /
• pp.163-178
• /
• 2001

We consider the experimental design problem of selecting values of design variables x for observation of a response y that depends on x and on model parameters $\theta$. The form of the dependence may be quite general, including all linear and nonlinear modeling situations. The goal of the design selection is to efficiently estimate functions of $\theta$. Three new criteria for selecting design points x are presented. The criteria generalized the usual Bayesian optimal design criteria to situations n which the prior distribution for $\theta$ amy be uncertain. We assume that there are several possible prior distributions,. The new criteria are applied to the nonlinear problem of designing to estimate the turning point of a quadratic equation. We give both analytic and computational results illustrating the robustness of the optimal designs based on the new criteria.

• ETRI Journal
• /
• 제45권2호
• /
• pp.226-239
• /
• 2023

Challenges in cognitive radio and tactical communications include recognizing anonymously received signals and estimating parameters in a blind or semi-blind manner. In this paper, we examine this issue for orthogonal frequency division multiplexing (OFDM) signaling. There are several parameters in OFDM signaling, and the blind receiver must extract and consider the synchronization issue. We assume that the blind receiver is aware of modulation type, OFDM, and not aware of chip duration and the length of cyclic prefix. First, we present new criteria based on kurtosis to estimate these parameters and compare their performance at different levels of additive white Gaussian noise with methods based on correlation, kurtosis, maximum likelihood, and matched filter. Then, we perform synchronization and estimate the start time based on these criteria and several new criteria in two steps: fine and coarse synchronization. Finally, in a more practical setup, we present the idea of jointly estimating the mentioned parameters and the signal start time as coarse synchronization. We compare different criteria and show that one of the proposed criteria has the highest efficiency.

• 한국조경학회지
• /
• 제30권3호
• /
• pp.1-11
• /
• 2002

The purpose of this study is to construct an evaluation criteria based on the relative importance and various combinations of each evaluation index and then to appraise urban biotope in terms of nature experience and recreation. After the standard of evaluation had been developed through the review of existing literature, the relative importance of the evaluation index through expert survey was determined, and the evaluation model to assess biotope value was established. The results of this study are as follows; 1) We have constructed the seventeen evaluation criteria through literature reviews, and have provided relative importance to each evaluation index of the natural in biotope, the diversity of landscape patterns, the appearance-existence of water space, the special landscape elements, and the access based on the results of expert survey. and then we have constructed an evaluation system using the relative importance criteria. 2) To evaluate urban biotope using the evaluation system constructed, we selected 14 sites. The final evaluation results of each site is as follows; The first grade areas are the water space with semi-natural style in front of Gangchon Woobang apartments, the forest zone near Page Temple at Mt. Palgong, the edge area of Jisan and Gosan and the tendril yard against Anshim middle school. The second grade areas are Hyomyung elementary school, the farm land behind the third Anshim Jugong apartment, Ehyun put and the swampy land in front of the Kangchon and Anshim construction site. The third grade areas are Seohan and Hwasung high-rise apartments at Beummul-Dong, the Korea Manpower Agency in the Sungseo industrial zone, and the adjacent area of St. Tongil. The only fourth grade area is the commercial zone near Taegu Department Store. 3) It is highly useful to evaluate urban biotope using the evaluation criteria constructed for this research, the evaluation criteria we developed may be difficult to encompass all expert opinion and the period of space-formation is difficult to estimate urban biotopes. In the future, it is necessary to gather the basic data suitable to estimate biotope and it is necessary to develop detailed evaluation criteria applicable to estimate every biotope that has specific property.

• 한국임상약학회지
• /
• 제32권3호
• /
• pp.260-269
• /
• 2022

Background: Comprehensive medication management is essential to achieve safe and optimal drug use for the elderly in long-term care facilities (LTCF). This study aimed to develop eligibility criteria for "Comprehensive medication management program in LTCF" using the RAND/UCLA Appropriateness Method (RAM). Furthermore, we attempted to estimate the number of beneficiaries who met the criteria by analyzing the National Health Insurance claims data. Methods: Twelve criteria were selected initially. We composed a panel of 14 experts with expertise in long-term care. We conducted two survey rounds to reach a consensus. Rating for appropriateness and decision regarding agreement were applied per RAM. We analyzed the National Health Insurance data to estimate the number of LTCF residents who met each eligibility criterion. Results: Of the 11 items agreed upon, ten items were determined to be appropriate. In 2018, 83.6% of 165,994 residents of LTCF met one or more eligibility criteria. The largest number of subjects met the "New residents of LTCF" criterion, followed by "Take high-alert drugs" and "Chronic excessive polypharmacy." Since the items evaluated as most appropriate by the expert panel and those with a large number of subjects were similar, we confirmed the external validity of our criteria. Conclusion: It is worth noting that this is the first attempt to establish the eligibility criteria for medication management in LTCF. Further preliminary research is needed to identify the selected subjects' drug-related problems and revise the criteria according to the results.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.63-65
• /
• 2014

오픈소스 소프트웨어는 라이선스 비용이 없이 정액제의 구독(Subscription) 방식으로 서비스를 하는 특성이 있다. 이러한 비즈니스 방식은 라이선스 비용과 유지보수 서비스를 통해 과금하는 상용 소프트웨어와는 다른 방식으로 대가 산정이 이루어져야 한다. 하지만 이러한 특성에 대해 공공부문을 포함한 시장 수요자의 이해도가 낮아 오픈소스 소프트웨어를 통한 비즈니스가 활발히 펼쳐지는데 한계가 있는 상황이다. 이에 여러 선행 연구 및 시장 사례를 조사하고 발전시켜 오픈소스 소프트웨어 비즈니스에 적용할 수 있는 대가 산정 기준에 대한 모델을 제시하고자 한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.181-186
• /
• 2001

High speed railroad noise is one of the main causes of environmental impact. An estimate of the relevant noise levels is usually required in order to evaluate the noise barrier and the anti-noise trailer. This paper introduce the test procedure and the estimate for HST noise. The aim of this is to measure, by means of a test, the level of acoustic pressure present during the passing of a KTX(Korea Train Express), in order to satisfy the contractual requirements and the noise criteria. A number of measurements are carried out in order to estimate noise impact by HST along test track.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.684-701
• /
• 2016

The Gaussian process model (GPM) is a flexible surrogate model that can be used for nonparametric regression for multivariate problems. A unique feature of the GPM is that a prediction variance is automatically provided with the regression function. In this paper, we estimate the safety margin of a nuclear power plant by performing regression on the output of best-estimate simulations of a large-break loss-of-coolant accident with sampling of safety system configuration, sequence timing, technical specifications, and thermal hydraulic parameter uncertainties. The key aspect of our approach is that the GPM regression is only performed on the dominant input variables, the safety injection flow rate and the delay time for AC powered pumps to start representing sequence timing uncertainty, providing a predictive model for the peak clad temperature during a reflood phase. Other uncertainties are interpreted as contributors to the measurement noise of the code output and are implicitly treated in the GPM in the noise variance term, providing local uncertainty bounds for the peak clad temperature. We discuss the applicability of the foregoing method to reduce the use of conservative assumptions in best estimate plus uncertainty (BEPU) and Level 1 probabilistic safety assessment (PSA) success criteria definitions while dealing with a large number of uncertainties.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.452-457
• /
• 2002

High speed railroad noise is one of the main causes of environmental impact. An estimate of the relevant noise levels is usually required in order to evaluate the noise barrier and the anti-noise trailer. This paper introduce the test procedure and the estimate for HST noise. The aim of this is to measure, by means of a test, the level of acoustic pressure present during the passing of a KTX(Korea Train Express), in order to satisfy the contractual requirements and the noise criteria. A number of measurements are carried out in order to estimate noise impact by HST along test track.

• 응용통계연구
• /
• 제7권1호
• /
• pp.131-140
• /
• 1994

패턴분류대상이 되는 자료로부터 패턴식별함수를 찾고 패턴분류에 적용시키기 위하여, 우선 이러한 자료에 몇 개의 패턴이 존재하는지를 알아야 하는 문제점에 대하여 고려하였다. 수집된 자료가 단일분포로부터 발생하였는지 또는 두 개의 혼합분포로부터 발생하였는지를 판단하는 기준을 표본분산의 특성값인 분산의 부트스트랩 추정값 (bootstrap estimate)으로 설정하였다. 새로운 판단기준의 특성에 대하여 살펴보고 시뮬레이션을 통하여 판단기준의 적합성을 연구하였다.

• 한국정밀공학회지
• /
• 제13권10호
• /
• pp.78-87
• /
• 1996

In this paper, a remeshing criterion has been suggested in order to order to automate the remeshing decision during finite element analysis of metal forming. In order to use for the remeshing decision, two of remeshing criteria have been investigated. One is the use of error estimates based on errors in stresses and strain rate of the finite element solution and the other is the use of geometric characterisreics of distorted elements. As a result, the strain rate error estimate in power norm based on the former is found to give more valuable information about remeshing decision than the ones based on the latter. Examples are given to demon- strate the usefulness of the suggested eroor estimate as a remeshing criterion.