• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.1
• /
• pp.3-9
• /
• 2003

In an apartment building, the impact sound from upstairs has been regarded as a main source of noise causing discontentment among occupants. To set the optimum design for sound insulation. it is nesessary to suggest the useful tools or technique that predict the floor impact sound. The purpose of this study is to investigate the applicability of the theory of sound radiation. We measured the vibration acceleration levels on the interior structures and predicted the sound pressure level of the room by using them. The result show that the predicted value, in general, were in good agreement with the measured values within 5∼10% in error rate.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.1
• /
• pp.24-34
• /
• 2009

This paper investigates active noise control of ducts using filtered-x least mean square(FXLMS) algorithms to reduce noise transmission. Single channel FXLMS(SFXLSM) and multiple channel FXLMS(MFXLMS) algorithms are used to implement the active control systems. The transmission loss is significantly increased by SFXLMS but the sound pressure level(SPL) at the upstream of the error sensor is increased while that of downstream is very low. This increase of the upstream SPL causes the duct wall to vibrate and so to radiate noise. To prevent the wall vibration generated by the sound field upstream, global sound field control is required. To reduce SPL globally along the duct, active noise control using MFXLMS is implemented. We can then be obtained globally reduced SPL. It is found experimentally that the vibration level, and so the radiated noise level, can be reduced by the active noise control using MFXLMS.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.274-276
• /
• 2001

A simple current controller for three-phase PWM power inverters using 3-level comparator is presented. All voltage vectors are accurately selected in order to minimize the current error using two three-level comparators and ${\alpha}-{\beta}$ current reference frame. The proposed algorithm have fast response and low current errors. This current controller is improved synchronization problem and increased the voltage utilization value. Usefulness of propose method are verified on the simulation result using Matlab/Simulink.

• English Language & Literature Teaching
• /
• v.13 no.2
• /
• pp.109-127
• /
• 2007

As an attempt to investigate the use of common verbs by a small group of Korean college students at the advanced level, the present study describes the students' speech production data collected from picture description tasks. The primary focus of the data description was how the students used high-frequency verbs in describing everyday activities. Out of total 442 units, 149 verbs were erroneously used. All erroneous utterances were classified into four categories according to their characteristics. The most prominent error type was overgeneralization due to incomplete knowledge of lexical items. Results showed that verbs used in everyday life were not easy even for the advanced level students. Although in some cases, L1 influence was discerned, the students' problems are more fundamental. In particular, the data revealed lack of knowledge of collocational possibilities and restrictions, and confusion about semantic boundaries between verbs which have similar semantic areas. The findings suggest that teaching at the advanced level should take contrastive approaches intralingually as well as interlingually to the high-frequency verbs.

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.393-399
• /
• 2011

We evaluate the link-level performance of cooperative multi-hop relaying networks with an maximum distance separable (MDS) code. The effect of the code on the link-level performance at the destination is investigated in terms of the outage probability and the spectral efficiency. Assuming a simple topology, we construct an absorbing Markov chain. Numerical results indicate that significant improvement can be achieved by incorporating an MDS code. MDS codes successfully facilitate recovery of the message block at a relaying node due to powerful error-correcting capability, so that it can reduce the outage probability. Furthermore, we evaluate the average number of hops where the message block can be delivered.

• IE interfaces
• /
• v.24 no.1
• /
• pp.58-70
• /
• 2011

As more individuals and organizations participate in the complex design process of manufacturing industry, collaborative product development and management of the global supply chain have become more popular. Although the product quality concerns once focused on the manufacturing process, they are now directed at earlier stages of the design cycle where the engineering product is created as a 3D CAD model. In this paper, we describe the current state of product data quality activities in the manufacturing industry and the yardstick to measure 3D CAD data quality. Moreover we introduce a quality assurance method through the result of statistical analysis of 3D CAD models and suggest a six sigma level of CAD data quality by analyzing 76 samples provided from three Korean automotive companies.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.250-251
• /
• 2021

A subcontract work order is the basis of the construction process and consists of the root and trunk of the construction industry. The construction process through a subcontract work order is an important element of project success, and it is the basic unit of creating profit in the construction industry. Therefore, correct analysis and forecasting of subcontract work orders allow correct estimation of construction cost and profit which is the foundation of corporate decision making. This study has started to provide predictions of subcontractor's bidding-ratio for decision-making. Since the actual project data has been used in this study, the contribution level of the model is highly expected in actual field. The statistical confidential level of adjusted decision coefficient is concluded low because of limited sample numbers. However, its accuracy and confidence level can be increased through increasing sample numbers, considering more variables, and studying of reducing error.

• Korean Journal of Social Welfare
• /
• v.63 no.2
• /
• pp.81-107
• /
• 2011

The purpose of the study is to examine the effect of error management culture and psychological capital on job satisfaction and organizational commitment from social workers. This study was focused on the relationship between error management culture, psychological capital and job satisfaction and organizational commitment, controlled organizational fairness. The data was collected from social workers in Seoul, Kyunggi areas using stratified sampling method. A total of 564 social workers and 89 human service organizations were finally used for multilevel analysis. The survey had conducted for 18 days, from October 27 to November 13 in 2009 by mail. The major finding of this study are as follows. First, interaction effect between error management culture and psychological capital was significant job satisfaction and organizational commitment in positive direction. Second, main effect of error management culture in human service organizations was positively significant job satisfaction and organizational commitment on social workers. So it was important to enhance the level of error management culture in order to increase the job satisfaction and organizational commitment. Third, main effect of psychological capital on social workers was positively significant job satisfaction and organizational commitment. According to the results of this study, it was suggested the theoretical and practical implications for increasing and strengthen the error management culture and psychological capital.

• 한국노년학
• /
• v.28 no.4
• /
• pp.953-968
• /
• 2008

This research was performed to recognize anxiety level of older people, to find out anxiety level after or before regular exercises, and to find out how much anxiety level could be lowered by the sports activities. This research selected a population among the students who enrolled at sport activity classes (e, g., physical exercises, gate ball, volume dance) at L, S, J, Y (a), Y (b), D older people college located in Seoul and Gyoenggi area. 200 of the population were chosen as candidates by convenience sampling, nonprobability sampling. Considering the age of the candidates, total 200 cases were collected by using two methods (survey and interview) simultaneously. The data assessment was made by SPSS 12.0 Version. Error tolerance in statistics is .05. The data was analyzed by using frequency analysis, paired t-test and independent t-test. After analyzing anxiety awareness level after and before regular exercises, anxiety of older people are classified by four factors. First, anxiety for loss is 3.756 (M=3.756) before exercises, while 1.942 (M=1.942) after exercises. Second, fear for aging is 3.443 before exercises and 2.243 after exercises. Third, anxiety for physical appearance is 3.253 before exercises and 2.310 after exercises. Finally, anxiety caused by psychological insecurity is 3.060 before exercises, while 1.666 after exercises. Error of tolerance for all factors falls within .001. Anxiety score after exercises is lower than that of before exercises for every factor as well. As a result, regular physical exercises appeared to reduce anxiety level of older people.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.463-473
• /
• 2021

Recently, United States Geological Survey (USGS) distributed Landsat 8 Collection 2 Level 2 Science Product (L2SP). This paper aims to derive land surface temperature from L2SP and to validate it. Validation is made by comparing the land surface temperature with the one calculated from Landsat 8 Collection 1 Level 1 Terrain Precision (L1TP) and the one from Automated Synoptic Observing System (ASOS). L2SP is calculated from Landsat 8 Collection 2 Level 1 data and it provides land surface temperature to users without processing surface reflectance data. Landsat 8 data from 2018 to 2020 is collected and ground sensor data from eight sites of ASOS are used to evaluate L2SP land surface temperature data. To compare ground sensor data with remotely sensed data, 3×3 grid area data near ASOS station is used. As a result of analysis with ASOS data, L2SP and L1TP land surface temperature shows Pearson correlation coefficient of 0.971 and 0.964, respectively. RMSE (Root Mean Square Error) of two results with ASOS data is 4.029℃, 5.247℃ respectively. This result suggests that L2SP data is more adequate to acquire land surface temperature than L1TP. If seasonal difference and geometric features such as slope are considered, the result would improve.