• Journal of the Ergonomics Society of Korea
• /
• v.26 no.1
• /
• pp.71-77
• /
• 2007

Shoe's size and shape are determined by the last that takes shape of foot because last is the mold of shoe in development and manufacturing process. Then adaptation between foot and shoe is dependent on the last. In mass shoe production, model size is developed in the first place, other sized lasts are made through the grading process based on model size. The most important factor in grading system is grading deviation that must be same amount induced from foot measuring database. At present, most of the last manufacturing companies in korea using 260mm as a standard foot model size. When length grading deviation is 5mm, the ball girth grading deviation is 3.7mm and the ball width grading deviation is 1.2mm. I verified existing grading system by comparing grading results with foot measuring data. Also, I proposed reasonable grading deviation and application method of grading system. From the analysis of foot measuring database, reasonable grading deviations are 1.22mm in ball width and 0.84mm in ankle height in case of length grading deviation is 5mm. I confirmed that the current grading system is very accurate. When we grade last from 230mm to 290mm by current grading system based on model size 260mm, there is grading error over 1mm in the front outside area of foot. This error level of 1mm is no problem in normal walking shoe's last, but it induces adaptation problems in sports and special purposed shoe's last. Therefore using of three standard model size is recommended in grading men's last for reducing grading deviation error under the level of 1mm. It is specifically described as 235mm in 225-245mm, 260mm in 250-270mm, 285mm in 275-295mm. According to the above recommended grading system, it is enough to measure only three foot sizes in case of foot measuring project for men's last development.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.259-266
• /
• 1990

Leaks at the piston seal and the by-pass port of a small volume prover have relatively large influence on the proving accuracy in comparison with a conventional ball prover. The pulse interpolator, which is to increase the discrimination, is affected by the characteristic of the flowmeter signal. In this study, a small volume prover of the double cylinder type was designed in order to study the pulse interpolation error as well as the leak error. The basic volume of the prover determined by a water draw method was about 9.68L. Experimental results revealed that interpolation data attained by the repeated piston pass for turbine meters at a fixed flowrate may be treated effectively by applying a statistical method. It was possible to limit the pulse interpolation error less than .+-. 0.02% at the 95% confidence level. However, in the case of the bulk meter, if failed to achieve the required repeatability level because of the pulse characteristics. The basic volume change appeared to be independent of the piston velocity within the .+-. 0.05% of tolerance.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.3 no.1
• /
• pp.16-20
• /
• 2012

During construction of the cable-stayed bridge, not only shape of deck and pylon but also cable forces are main factors for geometry control. Especially, geometry control of deck must be controlled for adjusting design value of vertical and lateral alignment as well as closing of key segment. Also, both the deck level error and cable force error occur necessarily during the construction stage in cable stayed bridge. The errors are caused by different of material properties and computer modeling, and construction mistake, and so on. These causes bring about that the forces of cable and the displacement of deck show different tendency from the theoretical values. Therefore, these errors must necessarily be adjusted and can be improved through adjustment of cable length. In this study, a new optimization tool is proposed to adjust the errors of the second Dolsan cable-stayed bridge.

• Journal of Elementary Mathematics Education in Korea
• /
• v.11 no.2
• /
• pp.199-216
• /
• 2007

The purpose of the present study was to analyze the types of errors made by students in the figure domain at the stages of first and second semester of 4th grade in elementary school that include the definition and the properties of figure, to identify the causes of such errors, and to help the teaching of the 4th grade figure domain. When the trends of errors were analyzed for each question, the most common error was the wrong use of theorems or definitions, and its main causes were student's low level in geometry and limited concept images. Thus, it is necessary to make them have clear understanding of these concepts and terms and students need to do various activities suitable for their level in geometry. In addition, figure images presented in the mathematics textbooks and the mathematics practice book have limitations. Thus, figures of various positions and lengths should be presented and described accurately, and the books should be redesigned for various practical activities.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.6
• /
• pp.33-40
• /
• 1996

In this paper, we resolved a trade-off problem of the blind equalizer based on the stop-and-go algorithm that is commonly used for QAM demodulation in CATV receiver. The stop-and-go algorithm has used the LMS(least mean square) algorithm in the updating operation of tap weights so that the structure of equalizer is simple, but there is a trade-off between convergence speed and steady state error as in the typical LMS algorithm. We used the variable step size algrithm to improve the convergence speed with the steady state error in the constant level. With respect to the same level of the steady state error, the variable step size stop-and-go algortihm improved convergence speed by about $36%{\sim}56%$ as compared with that of the constant step size algortihm.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.4
• /
• pp.1-10
• /
• 2000

The error diffusion technique is frequently utilized for the digital Imaging output devices to convert continuous level Image into bi-level Image It Yields the binary image with the high frequency emphasis that gives a pleasing perception to human eyes But, due to the non-homogeneous distribution of dots, It exhibits undesirable patterns that degenerate the perceived quality Various techniques have been proposed to Improve the Image quality by the error diffusion techniques In this paper, the cause of non-homogeneity of dot distribution is analyzed first. A threshold modulation technique that employs a simple sinusoidal function is proposed in this paper The proposed method achieves the homogeneous dot distribution by forcing the minor pixels on the binary Image to maintain the principal distance defined according to their gray levels. It also minimizes the void and clusters of minor pixels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1495-1507
• /
• 1993

In this paper, an implementation of RS (Reed-Solomon) code decoder for CDP (Compact Disc Player) using microprogramming method is presented. In this decoding strategy, the equations composed of Newton's identities are used for computing the coefficients of the error locator polynomial and for checking the number of erasures in C2(outer code). Also, in C2 decoding the values of erasures are computed from syndromes and the results of C1(inner code) decoding. We pulled up the error correctability by correcting 4 erasures or less. The decoder contains an arithmetic logic unit over GF(28) for error correcting and a decoding controller with programming ROM, and also microinstructions. Microinstructions are used for an implementation of a decoding algorithm for RS code. As a result, it can be easily modified for upgrade or other applications by changing the programming ROM only. The decoder is implemented by the Logic Level Modeling of Verilog HDL. In the decoder, each microinstruction has 14 bits( = 1 word), and the size of the programming ROM is 360 words. The number of the maximum clock-cycle for decoding both C1 and C2 is 424.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4C
• /
• pp.362-369
• /
• 2007

APSK (Amplitude Phase Shift Keying) digital modulation is characterized by the circular positioning of the transmission symbols in the constellation diagram. Due to such structural characteristics, the peak-to-average power ratio of the APSK modulation is lower than that of the QAM (Quadrature Amplitude Modulation), and the amount of performance degradation over nonlinear channels can be mitigated. The APSK modulation scheme has recently been adopted as satellite communication system standards including the DVB-S2 (Digital Video Broadcasting - Satellite, Version 2). In this paper, a BER (Bit Error Rate) upper bound approximation formula is derived using the channel model with the output power saturation characteristics, and its accuracy is demonstrated. Using the derived formula, the input power level that minimizes the BER is determined. The optimized performance based on the radii ratio of the 16APSK constellation and the channel saturation level is also presented.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.77-85
• /
• 2004

This paper proposes a multi-level vector error diffusion method using 64 primary colors to improve color impulse artifact in bright region. Vector error diffusion method causes color impulse artifact in bright region because we only use the Euclidean distance measure in quantization process. In order to reduce this artifact, the proposed method divides input color into chromatic color and achromatic color according to chroma value. In the case of chromatic color, input color is classified into bright region, middle bright region, and dark region according to lightness value. N candidate primary color is organized using lightness difference between input vector and 60 chromatic primary color vector in the case of bright region. Then, primary color with minimum vector norm between input vector and N candidate primary color in addition to 4 achromatic primary colors is selected as output color. As a result of experiments, the proposed method showed visually pleasing halftone output.

• Korean Journal of Optics and Photonics
• /
• v.33 no.3
• /
• pp.106-112
• /
• 2022

A two-dimensional optical code division multiple access (OCDMA) encoder/decoder, which is composed of add/drop filters and all-pass filters for delay operation, is proposed. An example design is presented, and its feasibility is illustrated through numerical simulations. The chip area of the proposed OCDMA encoder/decoder could be about one-third that of a previous OCDMA device employing delay waveguides. Its performance is numerically investigated using the transfer-matrix method combined with the fast Fourier transform. The autocorrelation peak level over the maximum cross-correlation level for incorrect wavelength hopping and spectral phase code combinations is greater than 3 at the center of the correctly decoded pulse, which assures a bit error rate lower than 10^-3, corresponding to the forward error-correction limit.