• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.6
• /
• pp.64-76
• /
• 2014

This study identified the causes of errors that could take place in the estimation process of vehicle miles traveled and quantified the effects of each of those causes on the estimation accuracy of vehicle miles traveled via error rate to propose an efficient way to estimate vehicle miles traveled. The study proceeded as follows: first, the study established survey data of vehicle miles traveled in the pilot test areas to test the accuracy of a method to estimate vehicle miles traveled. Second, the causes of errors with the estimation of vehicle miles traveled were categorized into errors with the sample size, sampling methods, and homogeneous link setting methods. In addition, many different methodologies were set to minimize errors with the estimation of vehicle miles traveled according to each of the causes. Third, error rates of estimation of vehicle miles traveled were compared and analyzed according to each of the methodologies. Finally, a toy network was established to propose a way of estimating vehicle miles traveled by taking the local characteristics into consideration. The study finds its significance in that it proposed an efficient way to estimate vehicle miles traveled through an experiment and planning approach and made use of survey data of vehicle miles traveled to test estimation accuracy. The proposed way of estimating vehicle miles traveled by taking into account the local characteristics will make a contribution to the estimation of vehicle miles traveled by the areas in future along with the level of data offered in the study.

• Journal of Korean Society of Forest Science
• /
• v.105 no.3
• /
• pp.342-350
• /
• 2016

This study aims to make the stand density management diagram which is very useful for establishing systematic management plan and obtaining management goal in Pinus densiflora forest. To estimate 5 models mainly composed of stand density management diagram, we used total of 1,886 sample plots having more than 75% of the total basal area of the pine trees in each stand. To test the goodness of fit, $X^2$ was computed with a significance level of 5%, and the acceptable error range as 20%. Also standard deviation of the model was $34.59m^3{\cdot}ha^{-1}$, minimum acceptable error range was 16.59% and coefficient of variation was 22.11%. If we use the stand density management diagram, it would be useful to establish the timber yield and thinning plan understanding the pathway of stand density management.

• Journal of Korea Water Resources Association
• /
• v.44 no.4
• /
• pp.275-283
• /
• 2011

A local or site-specific water temperature is downscaled from the nation-wide air temperature that represents simulation by General Circulation Model (GCM). Both two-step and one-step method are tested and compared in three sites: Masan Bay, Lake Sihwa, and Nakdong River Estuary. Two-step method uses a linear regression model as the first step that converts nation-wide air temperature into local air temperature, and the corresponding coefficient of determination is in the range of 0.98~0.99. The second step that converts air temperature into water temperature uses a nonlinear curve, so called S-curve, and the corresponding root mean squared error (RMSE) is 2.07 for rising limb in Masan Bay, 1.93 for falling limb in Masan Bay, 2.59 for Lake Sihwa, and 1.58 for Nakdong River Estuary. In a similar way, one-step method is performed to directly convert nation-wade air temperature into local water temperature, and the corresponding RMSE is 2.28 for rising limb in Masan Bay, 1.89 for falling limb in Masan Bay, 2.55 for Lake Sihwa, and 1.52 for Nakdong River Estuary. Consequently both methods show a similar level of performance, and one-step method is recommendable in that it is simple and practical in relative terms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.376-381
• /
• 2018

The purpose of this study is to investigate price transmissions between wholesale and retail markets regarding Jeju tangerines by employing co-integration analysis and vector error correction model. The results of this study are summarized as follows: First, the long-run equilibrium relationship was found among wholesale and retail markets in time series for level by distribution channel. Second, a short-run causality relationship was observed between wholesale and retail markets. Third, the long-run causality relationship between wholesale market and retail markets was found bidirectional and feedback effect. These results imply that the wholesale price performs a central role in establishing price in the tangerine market, and the wholesale market influences tangerine price. In conclusion, for the development of a competitive tangerine industry, it is necessary to aggressively promote the policy of supply and demand control of tangerine production through organizing producers.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.75-77
• /
• 2004

Stereotactic radiosurgery(SRS) is a technique to deliver a high dose to a particular target region and a low dose to the critical organ using only one or a few irradiations while the patient is fixed with a stereotactic frame. The optimized plan is decided by repetitive work to combine the beam parameters and identify prescribed doses level in a tumor, which is usually called a trial and error method. This requires a great deal of time, effort, and experience. Therefore, we developed the automatic arrangement of multi-isocenter within irregularly shaped tumor. At the arbitrary targets, which is this method based on the voxel unit of the space, well satisfies the dose conformity and dose homogeneity to the targets relative to the RTOG radiosurgery plan guidelines

• Journal of Biosystems Engineering
• /
• v.28 no.3
• /
• pp.231-238
• /
• 2003

Rose and chrysanthemum are the most popular flowers in Korean floriculture. Sorting flowers is a labor intensive operation in cultivation of the cut flowers and needed to be mechanized. Machine vision is one of the promising solutions for this purpose. This study was carried out to develop hardware and software of a cut flower sorting system using machine vision and to test its performance. Results of this study were summarized as following; 1. Length of the cut flower measured by the machine vision system showed a good correlation with actual length of the flower at a level of the coefficients of determination (R$^2$) of 0.9948 and 0.9993 for rose and chrysanthemum respectively and average measurement errors of the system were about 2% and 1% of the shortest length of the sample flowers. The experimental result showed that the machine vision system could be used successfully to measure length of the cut flowers. 2. Stem diameter of the cut flowers measured by the machine vision system showed a correlation with actual diameter at the coefficients of determination (R$^2$) of 0.8429 and 0.9380 for rose and chrysanthemum respectively and average measurement errors of the system were about 15% and 7.5% of the shortest diameter of the sample flowers which could be a serious source of error in grading operation. It was recommended that the error rate should be considered to set up grading conditions of each class of the cut flowers. 3. Bud maturity of 20 flowers each judged using the machine vision system showed a coincidence with the judgement by inspectors at ranges of 80%∼85% and 85%∼90% for rose and chrysanthemum respectively. Performance of the machine vision system to judge bud maturity could be improved through setting up more precise criteria to judge the maturity with more samples of the flowers. 4. Quality of flower judged by stem curvature using the machine vision system showed a coincidence with the judgement by inspectors at 90% for good and 85% for bad flowers of both rose and chrysanthemum. The levels of coincidence was considered as that the machine vision system used was an acceptable system to judge the quality of flower by stem curvature.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.1
• /
• pp.70-77
• /
• 2005

The study was results obtained from the trial make of the hybrid GPS-electromagnetic(EM) compass which overcome shortcoming of GPS compass and EM compass. The results were summarized as follows: GPS compass detected the stable ship's heading at 0.1^{\circ}$ intervals with the turning angular velocity of less than 25^{\circ}$/sec in the experiment for the characteristics of turning angular velocity with stepmotor, but in case of over 25^{\circ}$/sec the compass did not detect it. On the contrary, the EM compass always indicated the ship's heading with no connection of the turning angular velocity, however the compass is low accuracy compared with GPS one owing to a compass error. The ship's headings by the hybrid GPS-EM compass were displayed at fixed point and moving by car; if the GPS compass work the headings were displayed by GPS compass, if not, the heading is provided stably by adding or subtracting of a compass error to the heading of EM compass. Also, each ship's heading was derived from not only the GPS compass but also the EM one by add or subtract of the compass errors, and then was worked covariance for the analogy. The results show that the ship's heading of two compasses has been verified the similarity to 95% confidence level.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.203-211
• /
• 2013

Purpose: When we look at the object, we used the dominant eye mainly. For this reason, a prescription of the dominant eye is an important factor for glasses and contact lenses. This study evaluated visual acuity differences between dominant and nondominant eyes through analyzing refractive power changes in both eyes by the ages. Methods: This study was performed to investigate the relationship between refractive error and dominant eye which had the superiority in the function of binocular. 186 subjects without ocular disease were examined on the dominant eye. The dominant eye was examined by the Hole-in-the-card test. For the consistency of the measurements, we tested refractive power in three times by the same person. Results: Using SPSS, the relationship between vision and the dominant eye was analyzed. 135 people of the whole subjects have the dominant eye on right. The Number of the non-dominant eye is 51. We were divided into 3 types, the group under the age of 10 that begins to expose environment factor affect on vision (the average age $8.8{\pm}1.18$) and the age group of 10 to 20 that begins to change refractive power in earnest (the average age $14.1{\pm}2.58$) and the group after the age 20 that began to stabilize vision (the average age $51.8{\pm}17.51$). The visual acuity of dominant eye was higher than non-dominant eye in all age groups. Nevertheless, these results were not statistically significant. Mean astigmatism of dominant eye was smaller than the non-dominant eye, and this is significant, statistically (p=0.017<0.05). Conclusions: It is expected that the balanced eye with a lower level of astigmatism has a more possibility become a dominant eye.

• Journal of Advanced Navigation Technology
• /
• v.20 no.1
• /
• pp.8-14
• /
• 2016

High-level conceptual design analysis results of satellite communication system for Korea augmentation satellite system (KASS) satellite communication system, which is a part of KASS and consisted of KASS uplink Stations and two leased GEO is presented in this paper. We present major functions such as receiving correction and integrity message from central processing system, taking forward error correction for the message, modulating and up converting signal and conceptual design analysis for concepts for design process, GEO precise orbit determination for GEO ranging that is additional function, and clock steering for synchronization of clocks between GEO and GPS satellites. In addition to these, KASS requires 2.2 MHz for SBAS Augmentation service and 18.5 MHz for Geo-ranging service as minimum bandwidths as a results of service performance analysis of GEO ranging with respect to navigation payload(transponder) RF bandwidth is presented. These analysis results will be fed into KASS communication system design by carrying out final analysis after determining two GEOs and sites of KASS uplink stations.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.999-1004
• /
• 2005

An algorithm for a hybrid controller consists of a sliding mode control part and a fuzzy logic part which ar purposely for nonlinear systems. The sliding mode part of the solution is based on "eigenvalue/vector"-type controller is used as the backstepping approach for tracking errors. The fuzzy logic part is a Mamdani fuzzy model. This is designed by applying sliding mode control (SMC) method to the dynamic model. The main objective is to keep the update dynamics in a stable region by used SMC. After that the plant behavior is presented to train procedure of adaptive neuro-fuzzy inference systems (ANFIS). ANFIS architecture is determined and the relevant formulation for the approach is given. Using the error (e) and rate of error (de), occur due to the difference between the desired output value (yd) and the actual output value (y) of the system. A dynamic adaptation law is proposed and proved the particularly chosen form of the adaptation strategy. Subsequently VSC creates a sliding mode in the plant behavior while the parameters of the controller are also in a sliding mode (stable trainer). This study considers the ANFIS structure with first order Sugeno model containing nine rules. Bell shaped membership functions with product inference rule are used at the fuzzification level. Finally the Mamdani fuzzy logic which is depends on adaptive neuro-fuzzy inference systems structure designed. At the transferable stage from ANFIS to Mamdani fuzzy model is adjusted for the membership function of the input value (e, de) and the actual output value (y) of the system could be changed to trapezoidal and triangular functions through tuning the parameters of the membership functions and rules base. These help adjust the contributions of both fuzzy control and variable structure control to the entire control value. The application example, control of a mass-damper system is considered. The simulation has been done using MATLAB. Three cases of the controller will be considered: for backstepping sliding-mode controller, for hybrid controller, and for adaptive backstepping sliding-mode controller. A numerical example is simulated to verify the performances of the proposed control strategy, and the simulation results show that the controller designed is more effective than the adaptive backstepping sliding mode controller.