• 제목/요약/키워드: Error amplifier

검색결과 311건 처리시간 0.031초

노튼 증폭기의 전류검출성능 개선에 관한 연구 (A Study on Performance Improvement of Detecting Current of the Norton Amplifier)

  • 권성렬;이현창;이규대
    • 한국인터넷방송통신학회논문지
    • /
    • 제18권3호
    • /
    • pp.185-191
    • /
    • 2018
  • 본 논문에서는 센서 신호를 전류형태로 수신할 때 유리한 노튼 증폭기에서 전류 입력 시 발생하는 문제점을 분석하고 이를 개선하기 위한 회로를 제시하였다. 출력전압이 일정하게 유지되는 특성을 지닌 연산 증폭기로 구성된 버퍼회로의 출력을 전류의 입력단으로 활용하고, 이 때 버퍼회로에 흐르는 전원전류를 감지해 전류 입력단에서 유입되는 전류를 추출하도록 구성하였다. 제시한 회로의 성능을 확인하기 위해 회로를 구성하고 실험용 전류를 입력했을 때 나타나는 결과를 확인하였으며, 동일한 조건을 노튼 증폭기에 적용했을 때의 결과와 비교하였다. 비교 결과 기존의 노튼 증폭기에서 문제가 되었던 입력 오프셋 전압이 제시한 회로에서는 0V로서 제거되었고, 입력전류에 대한 출력전압의 평균오차는 무려 4.755%로 크게 줄어드는 등 전체적인 특성이 크게 향상되었음을 확인하였다.

Analog multiplier using operational amplifier

  • Petchmaneelumka, Wandee;Songsataya, Kiettiwan;Riewruja, Vanchai;Julsereewong, Prasit
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2005년도 ICCAS
    • /
    • pp.868-871
    • /
    • 2005
  • In this article, presents an analog multiplier using a general-purpose operational amplifier (opamp). The realization method is based on the quarter-square technique, which utilize the square-law characteristic of the class AB output stage of the opamp. The experimental results verifying the proposed multiplier performances are also included. The linearity error and the total harmonic distortion is about 0.8% and 1.6%, respectively.

  • PDF

휘드훠워드 선형 전력 증폭기의 주 신호 제거회로 적응특성해석 (Analysis of the Adaptation Characteristics of the Nulling Loop Control Circuit for the Feedforward Linear Power Amplifier)

  • 박일;이상설
    • 전자공학회논문지D
    • /
    • 제35D권10호
    • /
    • pp.13-21
    • /
    • 1998
  • 휘드훠워드 선형 전력 증폭기에 사용하는 적응형 주 신호 제거회로의 주 신호 제거 특성을 해석하였으며 선형 증폭기의 특성을 개선하기 위한 주 신호 제거 오차 제어방법을 제안한다. 이 해석을 통해 정상상태에서 주 신호 제거 율을 정확하게 예측함으로써 부 증폭기의 규격조건 및 주 증폭기의 백 오프 조건 등을 계산할 수 있으며 효율 및 경제성을 고려한 휘드훠워드 선형 증폭기의 최적설계가 가능하다.

  • PDF

Imperfect Signal Cancellation과 Feedback을 이용한 Feedforward 선형전력증폭기에 관한 연구 (A Study On the Feedforward Linear Power Amplifier Using Imperfect Signal Cancellation And Feedback)

  • 박정민;양승인
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.87-90
    • /
    • 2003
  • In this paper, A feedforward linear power amplifier is analyzed for imperfect signal cancellation and negative feedback for basestaion of IMT2000 band. the distortion generatied by the error amplifier is reduced using an imperfect signal cancellation for a 1-carrier WCDMA source by 4.3dB at 2.5MHz offset and 6dB at 5MHz offset of IMSR(intermodulation signal power ratio) compared to a perfect signal cancellation system. additionally, An imperfect signal cancellation using negative feedback improved 1.3dB and 8.2dB at 2.5MHz and 5MHz offset of IMSR compared to an imperfect signal cancellation.

  • PDF

전류- 제어 CMOS operational transconductance amplifier (A Current-controlled CMOS operational transconductance amplifier)

  • 정원섭;차형우;김홍배;노승룡
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
    • /
    • pp.563-566
    • /
    • 1988
  • A current-controlled CMOS operational transconductance amplifier(OTA), whose transconductance is directly proportional to the DC bias current, has been developed for many electronic circuit applications. It features that its transconductance is insensitive to temperature unlike that of the bipolar OTA. This property makes it possible to use the proposed OTA as a basic buliding block in electrically variable circuit design. The SPICE simulation shows that the conversion sensitivity of the circuit is 44.62 mv /${\mu}A$ and the linearity error less than 0.54 % over a bias current range from 2 ${\mu}A$ to 120 ${\mu}A$ when the output is loaded with a 1${\Omega}$ resistor.

  • PDF

Surface-Mountable 10 Gbps Photoreceiver Module Using Inductive Compensation Method

  • Kim, Sung-Il;Hong, Seon-Eui;Lim, Jong-Won;Moon, Jong-Tae
    • ETRI Journal
    • /
    • 제26권1호
    • /
    • pp.57-60
    • /
    • 2004
  • We propose an inductive compensation method for a surface-mountable 10 Gbps photoreceiver module. Since many typical 10 Gbps photoreceiver modules consist of a photodetector and low-noise pre-amplifier, the impedance mismatch between the photodetector and pre-amplifier, as well as package parasitics, may reduce the frequency bandwidth. In this paper, we inserted an inductive component between the photodetector and pre-amplifier in order to create frequency bandwidth expansion. From the measurement results, we have found that the proposed technique can increase the -3 dB bandwidth about 4.2 GHz wider compared with an uncompensated module. And, from a bit-error rate (BER) test, we observed -15.7 dB sensitivity at $10^{-12}$ BER. This inductive compensation can be implemented easily and is compatible with common manufacturing processes of photoreceiver modules.

  • PDF

VDR을 위한 선형 25Watts 고출력 증폭기 구현에 관한 연구 (A Study on Implementation of Linear 25Watts High Power Amplifier for VDR)

  • 최준수;허창우
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 추계학술대회
    • /
    • pp.389-391
    • /
    • 2011
  • 본 논문에서는 VDR(VHF Data Radio)용 선형 25Watt 고출력 증폭기 회로를 설계하고 제작하여 특성을 측정하였다. VDR의 주파수 대역은 117.975~137MHz이고, CSMA(Carrier Sense Multiple Access) 다중 접속방식, D8PSK(Differential Eight Phase Shift Keyed), 25kHz 채널 대역폭을 사용한다. 또한 DO-281A MOPS에 규정된 출력 전력 및 심볼 배열 에러, 불요파 방사, 인접채널 전력을 만족해야 한다. 설계한 고출력증폭기는 DO-281A 표준을 만족한다.

  • PDF

피드포워드 방식을 이용한 PCS 대역 선형 증폭기의 설계 (Design of a PCS Band Linear Power Amplifier Using Feedforward Approach)

  • 김윤호;정재웅
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 전력전자학술대회 논문집
    • /
    • pp.118-123
    • /
    • 2001
  • For multi-carrier communication system, power amplifier generate intermodulation products caused by their nonlinear characteristics. Intermodulation products arised around the carrier frequency cannot be filtered out, operate as noise source for tile adjacent channel and thus degrades the quality of communication. In this paper, the 1850MHz-band RF linear power amplifier has been designed and fabricated with feedforward loop. The error signal loop consists of several key components such as phase shifter and attenuator, subtracter. The proposed Linearizer was tested with two-tone signals separated 10MHz apart at the center frequency of 1850MHz. The experimental results show C/I improvement by 14.5${\~}$20dB over 15dB dynamic range(33${\~}$47.8dBm) which gave IMD of 53.25${\~}$59dBc for the designed LPA.

  • PDF

표준 센서 출력신호를 5V 전압-출력을 변환하는 디지털 계측 증폭기 설계 (A Design of Digital Instrumentation Amplifier converting standard sensor output signals into 5V voltage-output)

  • 차형우
    • 대한전자공학회논문지SD
    • /
    • 제48권11호
    • /
    • pp.41-47
    • /
    • 2011
  • 산업용 표준 센서 신호처리를 위해 다양한 입력신호를 5V 전압 출력으로 변환하는 새로운 디지털 계측 증폭기(DIA)를 설계하였다. 이 계측 증폭기는 상용의 계측증폭기, 7개의 아날로그 스위치, 2개의 1.0V와 -10.0V의 기준전압, 그리고 4개의 저항기로 구성된다. 신호 변환원리는 입력신호에 따라 저항기와 기준전압을 디지털적으로 선택하여 5V의 출력전압을 얻도록 회로 구성을 바꾸는 것이다. 시뮬레이션 결과 DIA는 0V~5V, 1V~5V, -10V~+10V, 그리고 4mA~20mA의 입력신호에 대하여 우수한 0~5V 출력전압 특성을 얻을 수 있다는 것을 확인하였다. 4가지 입력 신호에 대하여 비선형오차는 0.1%이하이다.

위성 WiBro 시스템에서 전력 증폭기의 효율성 향상과 비선형성 개선을 위한 PAPR 감소 기법과 사전 왜곡 기법 연구 (PAPR Reduction Techniques and Pre-Distortion Techniques to Improve Nonlinearity and Efficiency of the TWT Power Amplifier in the Satellite Wibro System)

  • 박평주;서명환;이병섭
    • 한국전자파학회논문지
    • /
    • 제19권12호
    • /
    • pp.1303-1312
    • /
    • 2008
  • OFDM 다중 반송파 시스템은 높은 PAPR 특성을 가지고 있으며, 일반적으로 널리 사용되는 TWTA와 같은 전력 증폭기는 진폭과 위상의 비선형 왜곡 특성을 가지고 있다. 이는 전력 증폭기의 증폭 효율을 떨어뜨릴 뿐만 아니라, 높은 에러율과 인접 채널간 간섭을 유발하는 가장 큰 원인이 된다. 본 논문에서는 이러한 문제를 개선하기 위해 위성 WiBro 시스템을 기반으로 피크 제거 기법과 능동 성상도 확장 기법 그리고 사전 왜곡 기법을 모두 적용하여 TWT 증폭기로 입력되는 WiBro 신호의 IBO를 비약적으로 감소시키는 시스템을 제안하였다.