• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권9호
• /
• pp.4223-4239
• /
• 2016

In this paper, we consider an amplify-and-forward (AF) full-duplex relay network (FDRN) using simultaneous wireless information and power transfer, where a battery-free relay node harvests energy from the received radio frequency (RF) signals from a source node and uses the harvested energy to forward the source information to destination node. The time-switching relaying (TSR) protocol is studied, with the assumption that the channel state information (CSI) at the relay node is imperfect. We deliver a rigorous analysis of the outage probability of the proposed system. Based on the outage probability expressions, the optimal time switching factor are obtained via the numerical search method. The simulation and numerical results provide practical insights into the effect of various system parameters, such as the time switching factor, the noise power, the energy harvesting efficiency, and the channel estimation error on the performance of this network. It is also observed that for the imperfect CSI case, the proposed scheme still can provide acceptable outage performance given that the channel estimation error is bounded in a permissible interval.

• 전력전자학회논문지
• /
• 제14권2호
• /
• pp.96-104
• /
• 2009

본 논문에서는 단상 전원의 위상 및 주파수 검출을 위해 전차원 상태관측기를 이용한 가상 2상 방식의 단상 위상고정루프(PLL: Phase Locked Loop) 제어기를 제안한다. 기존의 방식은 전원단에 주입된 저차 고조파를 완벽하게 제거하지 못하여 전체 PLL 시스템에 영향을 주게 된다. 제안된 알고리즘은 전차원 상태관측기를 사용하여 기본파와 고조파를 분리하고 고조파 성분을 효과적으로 제거 및 검출하여 기본파 성분만을 발생한다. 그리고 가상 발생신호 및 기존 입력신호를 함께 제어함으로써 기존방식보다 정상상태 오차를 감소시킬 수 있다. 모의실험결과 및 실제실험결과를 통하여 설계한 제어기에 의해 발생된 주파수가 실제값에 수렴하였으며 정상상태 추정 특성이 향상됨을 검증하였다. 또한 고조파 성분이 효과적으로 제거되고 기본파 성분만을 출력하는 것을 확인하였다.

• 대한음성학회지:말소리
• /
• 제59호
• /
• pp.89-99
• /
• 2006

This paper proposes a new structural head-related transfer function(HRTF) model to produce sounds in a virtual environment. The proposed HRTF model generates 3-D sounds by using a head model, a pinna model and the proposed distance model for azimuth, elevation, and distance that are three aspects for 3-D sounds, respectively. In particular, the proposed distance model consists of level normalization block distal region model, and proximal region model. To evaluate the performance of the proposed model, we setup an experimental procedure that each listener identifies a distance of 3-D sound sources that are generated by the proposed method with a predefined distance. It is shown from the tests that the proposed model provides an average distance error of $0.13{\sim}0.31$ meter when the sound source is generated as if it is 0.5 meter $\sim$ 2 meters apart from the listeners. This result is comparable to the average distance error of the human listening for the actual sound source.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권1호
• /
• pp.81-108
• /
• 2018

In this paper, we derive the theoretical Symbol Error Probability (SEP) of cooperative systems with best relay selection for Nakagami-m fading channels. For Amplify and Forward (AF) relaying, the selected relay offers the best instantaneous Signal to Noise Ratio (SNR) of the relaying link (source-relay-destination). In cooperative networks using Decode and Forward (DF), the selected relay offers the best instantaneous SNR of the link between the relay and the destination among the relays that have correctly decoded the transmitted information by the source. In the second part of the paper, we derive the SEP when all participating AF and DF relaying is performed. In the last part of the paper, we extend our results to cognitive radio networks where there is interference constraints : only relays that generate interference to primary receiver lower than a predefined threshold T can transmit. Both AF and DF relaying with and without relay selection are considered.

• 한국레이저가공학회지
• /
• 제14권2호
• /
• pp.24-29
• /
• 2011

The design of a telecentric f-${\theta}$ lens with a field of view (FOV) $30^{\circ}$ and an effective focal length of 1000mm is presented. The optical stop is placed at the front plane and the design is based on a geometric ray tracing technique, and the designed system consists of a series of convex and concave lenses. The designed f-${\theta}$ lens showed a considerable reduction in weight with a simplified structure and resulted in a good performance in the designated FOV. Detail analysis of rays is also presented. 653nm (red laser), 586nm (green laser), and 468nm (blue laser) were simulated as a light source and image illuminating source. The developed optical design requires 7 pieces of lenses made of SF1, N-FK56, N-LAK33, and BK7 glass materials. With optimal parametric design, the effective focal length was calculated to be 974.839mm which is very close to the initial design target. For the manufacturing purpose, the dimensions of lens curvature and thickness were truncated with error ranging 0.1% to 3.2%. As a result, the overall error was calculated to be 3.2% which can be still tolerable for display, laser material, and machining processing.

• 한국소음진동공학회논문집
• /
• 제15권5호
• /
• pp.604-611
• /
• 2005

The relationship between floor impact sound and vibration has been studied by field measurements, and the vibration modal characteristics have been analyzed. Vibration levels impacted by a standard heavy-weight impact source have been predicted according to the main design parameters using finite element method. Experimental results show that the dominant frequencies of the heavy impact sounds range below 100 Hz and that they are coincident with natural frequencies of the concrete slab. In addition, simple 2-dimensional finite element models are proposed to substitute 2 types of 3-dimensional models of complicated floor structural slabs those by The analytical result shows that the natural frequencies from first to fifth mode well correspond to those by experiments with an error of less than $12\%$, and acceleration peak value iscoincident with an error of less than $2\%$. Using the finite element model. vibration levels areestimated according to the design Parameters, slab thickness, compressive strength, and as a result, the thickness is revealed as effective to increase natural frequencies by $20\~30\%$ and to reduce the vibration level by 3$\~$4 dB per 30 mm of extra thickness.

• 한국산업정보학회논문지
• /
• 제16권4호
• /
• pp.19-26
• /
• 2011

중계기를 활용한 다중 입출력 기술이 차세대 광대역 무선 이동 통선의 유력한 후보로 연구되고 있다. 본 논문에서는 AF (amplify-and-forward) 방식 중계기 네트워크에서 SC-FDE (single carrier-frequency domain equalizer)를 위한 MRC (maximum ratio combining) MMSE (minimum mean-square-error) 등화 기법을 제안한다. 송신국과 수신국 간의 전송 신호와, 중계기를 통한 송신국과 수신국 간의 전송 신호를 MRC 방식으로 합쳐 MMSE 등화 기법을 적용하면 다이버시티 이득과 MMSE 등화 이득을 모두 획득하여 SC-FDE 시스템의 수신 성능을 크게 향상시킬 수 있다. AF 방식 중계기 네트워크에서 SC-FDE를 위한 MRC 계수 및 MMSE 등화탭의 수식을 정확히 도출하여 제시하고, 실험 결과를 통해 성능 향상을 확인한다.

• 조명전기설비학회논문지
• /
• 제14권4호
• /
• pp.39-47
• /
• 2000

본 논문에서는 입력전류 추정에 의한 전밥형 PWM 컨버터의 정상상태 및 과도상태 특성을 개선하기 위하여 정현추종제어기를 제안한다. 그리고, 입력전류의 추정방법과 제어기의 구성에 대해서 논의된다. DC 출력전압은 PI제어기로 제어되며, AC 입력전류를 직접추총 제어하는 정현추종 전류제어기가 입력전류 제어기로 사용된다. 정현추종 전류제아기는 좌표변환 알고리즘 없이 사용가능 하므로 제어계를 간소화 할 수 있다. 입력전류 제어계의 전달함수로부터 입력전류의 정상상태오차가 0이 되고, 입력전압의 동에 대해서도 제안한 제어계는 영향을 받지 않는다는 것을 알 수 있다. 아울러 제안한 방법에 대한 타당성이 시뮬레이션 및 부하, 입력 전압 변동에 대한 실험결과로부터 확인할 수 있다.

• Journal of Communications and Networks
• /
• 제9권2호
• /
• pp.118-127
• /
• 2007

We propose a link adaptation and selection method for the links constituting an orthogonal frequency division multiplexing (OFDM) based wireless relay network. The proposed link adaptation and selection method selects the forwarding, modulation, and channel coding schemes providing the highest end-to-end throughput and decides whether to use the relay or not. The link adaptation and selection is done for each sub-channel based on instantaneous signal to interference plus noise ratio (SINR) conditions in the source-to-destination, source-to-relay and relay-to-destination links. The considered forwarding schemes are amplify and forward (AF) and simple adaptive decode and forward (DF). Efficient adaptive modulation and coding decision rules are provided for various relaying schemes. The proposed end-to-end link adaptation and selection method ensures that the end-to-end throughput is always larger than or equal to that of transmissions without relay and non-adaptive relayed transmissions. Our evaluations show that over the region where relaying improves the end-to-end throughput, the DF scheme provides significant throughput gain over the AF scheme provided that the error propagation is avoided via error detection techniques. We provide a frame structure to enable the proposed link adaptation and selection method for orthogonal frequency division multiple access (OFDMA)-time division duplex relay networks based on the IEEE 802.16e standard.

• 한국전자파학회논문지
• /
• 제13권1호
• /
• pp.47-52
• /
• 2002

1993년도 ISO에서 \"Guide to Expression of Uncertainty in Measurement\"를 발표함으로써 측정과학에 있어 측정결과의 오차분석 방법을 폐기하기로 사실상 선언하였다. 그리하여 측정의 소급성과 신뢰성을 확보한다는 전제 하에 오차의 개념을 버리고 측정시의 측정불확도를 분석하는 것이 측정과학에 있어서 세계적인 추세이다. 본 논문에서는 전달표준인 열 전압변환기를 사용하여 고주파전압계의 정밀 교정에서 불확도를 산출하기 위하여 수학적 모델을 설정하고 측정에 관계되는 모든 불확도 요인을 분석하였다. 케이블의 영향과 열전대감지기와 직류전압계의 상관관계, 직류소스, RF소스, 감쇠기, 반사계수와 DUT 등 측정에 있어서 관계되는 모든 불확도요인을 분석하여 확장불확도를 산출하였다.확도를 산출하였다.