• The Korean Journal of Nuclear Medicine
• /
• v.39 no.6
• /
• pp.445-455
• /
• 2005

Purpose: We developed an animal SPECT system using clinical Philips ARGUS scintillation camera and pinhole collimator with specially manufactured small apertures. In this study, we evaluated the physical characteristics of this system and biological feasibility for animal experiments. Materials and Methods: Rotating station for small animals using a step motor and operating software were developed. Pinhole inserts with small apertures (diameter of 0.5, 1.0, and 2.0 mm) were manufactured and physical parameters including planar spatial resolution and sensitivity and reconstructed resolution were measured for some apertures. In order to measure the size of the usable field of view according to the distance from the focal point, manufactured multiple line sources separated with the same distance were scanned and numbers of lines within the field of view were counted. Using a Tc-99m line source with 0.5 mm diameter and 12 mm length placed in the exact center of field of view, planar spatial resolution according to the distance was measured. Calibration factor to obtain FWHM values in 'mm' unit was calculated from the planar image of two separated line sources. Te-99m point source with i mm diameter was used for the measurement of system sensitivity. In addition, SPECT data of micro phantom with cold and hot line inserts and rat brain after intravenous injection of [I-123]FP-CIT were acquired and reconstructed using filtered back protection reconstruction algorithm for pinhole collimator. Results: Size of usable field of view was proportional to the distance from the focal point and their relationship could be fitted into a linear equation (y=1.4x+0.5, x: distance). System sensitivity and planar spatial resolution at 3 cm measured using 1.0 mm aperture was 71 cps/MBq and 1.24 mm, respectively. In the SPECT image of rat brain with [I-123]FP-CIT acquired using 1.0 mm aperture, the distribution of dopamine transporter in the striatum was well identified in each hemisphere. Conclusion: We verified that this new animal SPECT system with the Phlilps ARGUS scanner and small apertures had sufficient performance for small animal imaging.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.284-290
• /
• 2013

This study analyzed the geometric, compressive, cutting and friction properties of oriental melons in order to design a gripper capable of soft handling and a cutter for cutting oriental melon vine among the end effector of oriental melon as a preliminary step for developing the end effector of the robot capable of harvesting oriental melons in protected cultivation. As a result, the average length, diameter at the midpoint, weight, volume and roundness of the oriental melons were 108 mm, 70 mm, 188 g, 333 mL and 3.8 mm. Nonlinear regression analysis was performed on the equation $W=L^a{\times}D_2^b$ with variation of the length (L) and diameter (D2) of the weight (W) of the oriental melons. As a result, it was shown that there was a correlation between a of 2.0279 and b of -0.9998 as a constant value. The average diameter of the oriental melon vine was 3.8 mm, and most vines were distributed within a radius of 5 mm from the center. The average yield value, compressive strength and hardness of the oriental melons were $36.5N/cm^2$, $185.7N/cm^2$ and $636.7N/cm^2$, respectively. The average cutting force and shear strength of the oriental melon vines were $2.87{\times}10^{-2}\;N$ and $5.60N/cm^2$, respectively. The maximum friction coefficient of the oriental melons was rubber of 0.609, followed by aluminium of 0.393, stainless steel of 0.177 and teflon of 0.079. It was considered possible to apply it to the size of the gripper and cutter, turning radius, dynamics of drive motor and selection of materials and their quality in light of the position error and safety factor according to the movement when designing end effector based on the analyzed data.

• Journal of Food Hygiene and Safety
• /
• v.32 no.3
• /
• pp.206-210
• /
• 2017

This study was performed to develope mathematical models for predicting growth kinetics of Staphylococcus aureus in the processed meat product, pyeonyuk. Growth patterns of S. aureus in pyeonyuk were determined at the storage temperatures of 4, 10, 20, and $37^{\circ}C$ respectively. The number of S. aureus in pyeonyuk increased at all the storage temperatures. The maximum specific growth rate (${\mu}_{max}$) and lag phase duration (LPD) values were calculated by Baranyi model. The ${\mu}_{max}$ values went up, while the LPD values decreased as the storage temperature increased from $4^{\circ}C$ to $37^{\circ}C$. Square root model and polynomial model were used to develop the secondary models for ${\mu}_{max}$ and LPD, respectively. Root Mean Square Error (RMSE) was used to evaluate the developed model and the fitness was determind to be 0.42. Therefore the developed predictive model was useful to predict the growth of S. aureus in pyeonyuk and it will help to prevent food-born disease by expanding for microbial sanitary management guide.

• The Journal of the Korean life insurance medical association
• /
• v.4 no.1
• /
• pp.44-76
• /
• 1987

Present study was undertaken to establish the modified Broca's indices to estimate standard body weight by using a total of 5,496 insured persons who were medically examined at the Honam Medical Room of Dong Bang Life Insurance Company Ltd. from January, 1983 to January, 1986. The results were as follows: 1. The linear regression equations of body weight to $height^3$ to estimate standard body weight were as follows: In male, for $18{\sim}19$ age group $y=7.272{\times}10^{-6}{\times}x^3+23.560$ for $20{\sim}29$ age group $y=8.187{\times}10^{-6}{\times}x^3+22.031$ for $30{\sim}39$ age group $y=8.627{\times}10^{-6}{\times}x^3+23.169$ for $40{\sim}49$ age group $y=9.561{\times}10^{-6}{\times}x^3+20.994$ for $50{\sim}59$ age group $y=8.604{\times}10^{-6}{\times}x^3+23.081$ and for all ages group $y=7.778{\times}10^{-6}{\times}x^3+25.929$ In female, for $18{\sim}19$ age group $y=8.252{\times}10^{-6}{\times}x^3+18.920$ for $20{\sim}29$ age group $y=7.715{\times}10^{-6}{\times}x^3+22.409$ for $30{\sim}39$ age group $y=8.808{\times}10^{-6}{\times}x^3+21.440$ for $40{\sim}49$ age group $y=9.691{\times}10^{-6}{\times}x^3+21.940$ for $50{\sim}59$ age group $y=12.550{\times}10^{-6}{\times}x^3+11.031$ and for all ages group $y=7.300{\times}10^{-6}{\times}x^3+26.601$ In both sexes, for all ages group $y=8.342{\times}10^{-6}{\times}x^3+22.998$ 2. The modified Broca's index is expressed by formula $\{height(cm)-100\}{\times}K(kg)$. K is obtained from the following formula standard weight to average height estimated $\frac{by\;means\;of\;linear\;regression\;equation(kg)}{\{Average\;height(cm)-100\}{\times}K(kg)}$=1 Author's modified Broca's indices are as follows: In male, for $18{\sim}19$ age group $\{height(cm)-100\}{\times}0.85(kg)$ for $20{\sim}29$ age group $\{height(cm)-100\}{\times}0.90(kg)$ for $30{\sim}39$ age group $\{height(cm)-100\}{\times}0.95(kg)$ for $40{\sim}49$ age group $\{height(cm)-100\}{\times}1.00(kg)$ for $50{\sim}59$ age group $\{height(cm)-100\}{\times}0.95(kg)$ and for all ages group $\{height(cm)-100\}{\times}0.95(kg)$ In female, for $18{\sim}19$ age group $\{height(cm)-100\}{\times}0.90(kg)$ for $20{\sim}29$ age group $\{height(cm)-100\}{\times}0.90(kg)$ for $30{\sim}39$ age group $\{height(cm)-100\}{\times}1.00(kg)$ for $40{\sim}49$ age group $\{height(cm)-100\}{\times}1.05(kg)$ for $50{\sim}59$ age group $\{height(cm)-100\}{\times}1.05(kg)$ and for all ages group $\{height(cm)-100\}{\times}1.00(kg)$ In both sexes, for all age group $\{height(cm)-100\}{\times}0.95(kg)$ 3. Several types of modified Broca's index recommended by author are as follows: I. In male, for $18{\sim}29$ age group $\{height(cm)-100\}{\times}0.90(kg)$ and for $30{\sim}59$ age group $\{height(cm)-100\}{\times}0.95(kg)$ In female, for $18{\sim}29$ age group $\{height(cm)-100\}{\times}0.90(kg)$ and for $30{\sim}39$ age group $\{height(cm)-100\}{\times}1.00(kg)$ II. In male, for all ages group $\{height(cm)-100\}{\times}0.95(kg)$ In female, for all ages group $\{height(cm)-100\}{\times}1.00(kg)$ III. In both sexes, for all ages group $\{height(cm)-100\}{\times}0.95(kg)$ Note: The first type of modified Broca's index is the most precise one in estimating standard body weight among several types established by author. 4. Error of estimated standard body weight appearing by applying modified Broca's indices is generally greater in short build persons than in tall build persons and is more dominant especially in female group.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.3
• /
• pp.123-135
• /
• 2006

Spatial variability and distribution map of soil properties and the relationships between soil properties and crop yields are not well characterized in agroecosystems that have been land leveled to facilitate more cultivation of the new reclaimed sloping highland. Potato, onion, carrot, Chinese cabbage and radish were grown on the coarse sandy loam soil in 2004. Soil moisture content, soil penetration resistance and crop yield were sampled in the $10m{\times}50m$ field consisted of five plots. Sampling sites of each cultivation plot were 33 for the soil moisture, 11 for the soil penetration and 33 for the crop yield. The results of semivariance analysis, most of models were shown spherical equation. The significant ranges of each spatial variability model for the soil moisture, soil penetration and crop yield were broad as 33-35 meters in the potato cultivation plot, and that in the Chinese cabbage cultivation plot was narrow as 5-6 meters. The coefficient of variances (C.V.) of moisture, penetration and yield were various from 14 to 59 percents in five cultivation plots. The highest C.V. of potato yield was 59 percents, and that of the radish cultivation plot was as low as 14 percents. The required sample numbers for the determination of soil moisture content, soil penetration resistance and crop yield with error 10% at 0.05 significant level were ranged 8-40 for soil moisture, 7-25 for soil penetration and 424-4,678 for crop yield. The variogram and distribution map by kriging described field characteristics well so that the spatial variability would be useful for soil management for better efficiency and precision agriculture in the reclaimed highland.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.4
• /
• pp.52-68
• /
• 2014

In this study, we investigated the seasonal variation of SST(Sea Surface Temperature) and thermal effluents estimated by using Landsat-7 ETM+ around the Kori Nuclear Power Plant for 10 years(2000~2010). Also, we analyzed the direction and range of thermal effluents dispersion by the tidal current and tide. The results are as follows, First, we figured out the algorithm to estimate SST through the linear regression analysis of Landsat DN(Digital Number) and NOAA SST. And then, the SST was verified by compared with the in situ measurement and NOAA SST. The determination coefficient is 0.97 and root mean square error is $1.05{\sim}1.24^{\circ}C$. Second, the SST distribution of Landsat-7 estimated by linear regression equation showed $12{\sim}13^{\circ}C$ in winter, $13{\sim}19^{\circ}C$ in spring, and $24{\sim}29^{\circ}C$ and $16{\sim}24^{\circ}C$ in summer and fall. The difference of between SST and thermal effluents temperature is $6{\sim}8^{\circ}C$ except for the summer season. The difference of SST is up to $2^{\circ}C$ in August. There is hardly any dispersion of thermal effluents in August. When it comes to the spread range of thermal effluents, the rise range of more than $1^{\circ}C$ in the sea surface temperature showed up to 7.56km from east to west and 8.43km from north to south. The maximum spread area was $11.65km^2$. It is expected that the findings of this study will be used as the foundational data for marine environment monitoring on the area around the nuclear power plant.

• Progress in Medical Physics
• /
• v.9 no.4
• /
• pp.227-245
• /
• 1998

A most appropriate model of 3-D conformal radiotherapy has been induced by clinical evaluation and animal study, and therapeutic gains were evaluated by numerical equation of tumor control probability(TCP) and normal tissue complication probability (NTCP). The radiation dose to the tumor and the adjacent normal organs was accurately evaluated and compared using the dose volume histogram(DVH). The TCP and NTCP was derived from the distribution of given dosage and irradiated volume, and these numbers were used as the biological index for the assessment of the treatment effects. Ten patients with liver disease have been evaluated and 3 dogs were sacrificed for this study. Based on the 3-D images of the tumor and adjacent organs, the optimum radiation dose and the projection direction which could maximize the radiation effect while minimizing the effects to the adjacent organs could be decided. 3). The most effective collimation for the normal adjacent organs was made through the beams eye view with the use of multileaf collimator. When the dose was increased from 50Gy to 70Gy, the TCP for the conventional 2-port radiation and the 5-port multidimensional therapy was 0.982 and 0.995 respectively, while the NTCP was 0.725 and 0.142 respectively, suggesting that the 3-D conformal radiotherapy might be the appropriate therapy to apply sufficient radiation dose to the tumor while minimizing the damages to the normal areas of the liver. Positive correlation was observed between the NTCP and the actual complication of the normal liver in the animal study. The present study suggest that the use of 3-D conformal radiotherapy and the application of the mathematical models of TCP and NTCP may provide the improvements in the treatment of hepatoma with enhanced results.

• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.106-111
• /
• 2002

The estimation of pile bearing capacity is important since the design details are determined from the result. There are numerous ways of determining the pile design load, but only few of them are chosen in the actual design. According to the recent investigation in Korea, the formulas proposed by Meyerhof based on the SPT N values are most frequently chosen in the design stage. In the study, various static and dynamic formulas have been used in predicting the allowable bearing capacity of a pile. Further, the reliability of these formulas has been verified by comparing the perdicted values with the static and dynamic load test measurements. Also, in most cases, these methods of pile bearing capacity determination do not take the time effect consideration, the actual allowable load as determined from pile load test indicates severe deviation from the design value. The principle results of this study are summarized as follows : As a result of estimate the reliability in criterion of the Davisson method, t was showed that Terzaghi & Peck >Chin>Meyerhof > Modified Meyerhof method was the most reliable method for the prediction of bearing capacity. Comparisons of the various pile-driving formulas showed that Modified Engineering News was the most reliable method. However, a significant error happened between dynamic bearing capacity equation was judged that uncertainty of hammer efficiency, characteristics of variable, time effect etc... was not considered. As a result of considering time effect increased skin friction capacity higher than end bearing capacity. It was found out that it would be possible to increase the skin friction capacity 1.99 times higher than a driving. As a result of considering 7 day's time effect, it was obtained that Engineering news, Modified Engineering News, Hiley, Danish, Gates, CAPWAP(CAse Pile Wave Analysis Program) analysis for relation, repectively, $Q_{u(Restrike)} / Q_{u(EOID)} = 0.98t_{0.1}$ , $0.98t_{0.1}$, $1.17t_{0.1}$, $0.88t_{0.1}$, $0.89t_{0.1}$, $0.97t_{0.1}$.

• Korean Journal of Ecology and Environment
• /
• v.43 no.1
• /
• pp.82-90
• /
• 2010

The ecological characteristics of the Korean Aucha perch, Coreoperca herzi, were determined in order to estimate stock of the mid-upper system of the Seomjin River. The age was determined by counting the otolith annuli. The oldest fish observed in this study was 5 years old. Relationships between body length (BL) and body weight (BW) were $BW=0.0195BL^{3.08}$ ($R^2=0.966$) (p<0.01). Relationships between the otolith radius (R) and body length (BL) were BL=3.882R+1.66 ($R^2=0.944$). The von Bertalanffy growth parameters estimated from a non-linear regression method were $L_{\infty}=19.68\;cm$, $W_{\infty}=188.64\;g$, $K=0.17\;year^{-1}$ and $t_0=-1.46$ year. Therefore, growth in length of the fish was expressed by the von Bertalanffy's growth equation as $L_t=19.68$ ($1-e^{-0.17(t+1.46)}$) ($R^2=0.997$). The annual survival rate (S) was estimated to be $0.666\;year^{-1}$. The instantaneous coefficient of natural mortality (M) of estimated from the Zhang and Megrey method was $0.346\;year^{-1}$, and instantaneous coefficient of fishing mortality (F) was calculated $0.061\;year^{-1}$. From the estimates of survival rate (S), the instantaneous coefficient of total mortality(Z) was estimated to be $0.407\;year^{-1}$.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.515-530
• /
• 2021

This study is to estimate soil moisture (SM) using Sentinel-1A/B C-band SAR (synthetic aperture radar) images and Multiple Linear Regression Model(MLRM) in the Yongdam-Dam watershed of South Korea. Both the Sentinel-1A and -1B images (6 days interval and 10 m resolution) were collected for 5 years from 2015 to 2019. The geometric, radiometric, and noise corrections were performed using the SNAP (SentiNel Application Platform) software and converted to backscattering coefficient of VV and VH polarization. The in-situ SM data measured at 6 locations using TDR were used to validate the estimated SM results. The 5 days antecedent precipitation data were also collected to overcome the estimation difficulty for the vegetated area not reaching the ground. The MLRM modeling was performed using yearly data and seasonal data set, and correlation analysis was performed according to the number of the independent variable. The estimated SM was verified with observed SM using the coefficient of determination (R²) and the root mean square error (RMSE). As a result of SM modeling using only BSC in the grass area, R² was 0.13 and RMSE was 4.83%. When 5 days of antecedent precipitation data was used, R² was 0.37 and RMSE was 4.11%. With the use of dry days and seasonal regression equation to reflect the decrease pattern and seasonal variability of SM, the correlation increased significantly with R² of 0.69 and RMSE of 2.88%.