• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1500-1502
• /
• 1997

We investigated the tracking and erosion resistance of the silicone rubber by Inclined-Plane Method. And, with the variation of the accelerated conditions such as the applied voltage and composition of contaminant, the change of the tracking characteristics according to such conditions was evaluated. The leakage current significantly increases with the increasing voltage, but the weight loss remains almost the same. The voltage above 5.0 kV isn't recommended because tracking breakdown occurs as fast as it does without erosion, and the typical discharge waveform was the form of rectifying wave.

• Journal of the Korean Ceramic Society
• /
• v.32 no.9
• /
• pp.1003-1008
• /
• 1995

CVD-Si3N4/CVD-SiC/pack-SiC/pyro-carbon/(3-D C/C composite) multilayer coating was performed to improve the oxdiation resistance and erosion resistance properteis of the 3-D carbon/carbon composite, and the plasma test was performed to measure the oxidation resistance and erosion resistance properties. The thicknesses of each film layer were about 10${\mu}{\textrm}{m}$ for pack-SiC, 5${\mu}{\textrm}{m}$ for CVD-SiC and 40${\mu}{\textrm}{m}$ for CVD-Si3N4. When the multilayer coated specimen was exposed to the plasma flame with temperature of 500$0^{\circ}C$ for 20 seconds, it showed the weight loss five times less than that of the only pyro-carbon coated specimen.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.1
• /
• pp.69-78
• /
• 1998

Thermal sprayed Cu-Ni alloy coating on the carbon steel was carried out impingement erosion-corrosion test and electrochemical corrosion test in the marine environment. The impingement erosion-corrosion behavior and electrochemical corrosion characteristics of substrate(SS400) and thermal sprayed Cu-Ni coating was investigated, and the corrosion control efficiency of Cu-Ni coating to substrate was estimated quantitatively. Main results obtained are as follows : 1) The weight loss rate of Cu-Ni coating layer by the impingement erosion-corrosion compared with substrate was smaller in high specific resistance solution than in low specific resistance solution. 2) The corrosion potential of Cu-Ni coating layer spray coating in the marine environment became more noble than that of substrate. 3) With the lapse of time, corrosion current density of Cu-Ni coating layer became stable, but that of substrate was increased. 4) As the corrosion control efficiency of Cu-Ni coating layer in the marine environment was over 90%, its anti-corrosion characteristics was excellent.

• Corrosion Science and Technology
• /
• v.19 no.6
• /
• pp.318-325
• /
• 2020

Generally, Al alloys of 5000 and 6000 series show excellent weldability, workability, and specific strength, and are widely used in ship building. A combined experiment via cavitation erosion and corrosion damage involving 6061-T6 Al alloy was performed using potentiodynamic polarization under cavitation erosion (hybrid experiments) with amplitude (cavitation strength). The corrosion current density was approximately 52-fold higher at 30 μm than under static conditions, suggesting that the amplitude greatly affected the damage. The degree of damage increased with increasing cavitation amplitude. After the hybrid experiment, the corrosion rate was compared according to the weight loss and damage depth, and the relationship between the two values was expressed as alpha value. The alpha (α) values at amplitudes of 5 μm, 10 μm and 30 μm were 5.11, 12.81 and 8.74, respectively, suggesting that the α value at 10 μm was greater than at 5 μm, and indicating local corrosion damage. However, the α value at 30 μm was smaller than that of 10 μm, which is attributed to higher damage via uniform corrosion than damage induced by local corrosion.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.8
• /
• pp.1174-1178
• /
• 2006

An experiment was conducted to investigate the effects of dietary supplementation of copper chelates in the form of methionine, chitosan and yeast on the performance of laying hens. Four hundred ISA Brown layers, 84 wks old, were assigned to 4 treatments: control, 100 ppm Cu in methionine chelate (Met-Cu), 100 ppm Cu as chitosan chelate (Chitosan-Cu) and 100 ppm Cu as yeast chelate (Yeast-Cu). Each treatment had five replicates of 20 hens. Hen-day and hen-housed egg production and egg weight were significantly (p<0.05) increased by Met-Cu supplementation. The increase by Chitosan-Cu and Yeast-Cu supplementation was not significant. Contrast of the control vs. Cu chelates showed egg weight was significantly (p<0.05) increased by Cu chelate supplementation. Soft-shell egg production was significantly (p<0.05) reduced by supplementation of Cu chelates. Met-Cu treatment showed the lowest incidence of soft egg production. Gizzard erosion index was increased by Cu chelate supplementation. Crude fat in liver, total cholesterol in yolk and Cu content in liver and yolk were not significantly influenced by Cu chelate supplementation. It was concluded that dietary supplementation of 100 ppm Cu as Met-Cu significantly increased egg production and egg weight. Cu-Met chelate was also effective in reducing soft-shell egg production but increased gizzard erosion index.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.521-528
• /
• 2021

In this study, to repair damaged economizer fin tubes on ships, sealing treatment was performed after applying arc thermal spray coating technology using Inconel 625. A solid particle erosion (SPE) experiment was conducted according to ASTM G76-05 to evaluate the durability of the substrate, thermal spray coating (TSC), and thermal spray coating+sealing treatment (TSC+Sealing) specimens. The surface damage shape was observed using a scanning electron microscope and 3D laser microscope, and the durability was evaluated through the weight loss and surface roughness analysis. Consequently, the durability of the substrate was superior to that of TSC and TSC+Sealing, which was believed to be owing to numerous pore defects in the TSC layer. In addition, the mechanism of solid particle erosion damage was accompanied by plastic deformation and fatigue, which were the characteristics of ductile materials in the case of the substrate, and the tendency of brittle fracture in the case of TSC and TSC+Sealing was confirmed.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2001.11a
• /
• pp.66-68
• /
• 2001

An experiment was conducted investigate the of supplemental Cu and Zn methionine chelates on the performance, nutrient digestibility, serum IgG level, gizzard erosion, and Cu and Zn contents in the liver and excretion of broiler chickens. One thousand hatched broiler chickens (Ross) of one day old were assigned to 4 treatments:control(T1), 100ppm of copper in the from of Cu-methionine chelate(Cu-Met, T2), 100ppm of zinc in the from of Zn-methionine chelate(Zn-Met, T3) and 100ppm of copper plus 100ppm of zinc in the from of methionine chelate(Cu-Zn-Met, T4). Each treatment had four replications of 50 bird each. Weight gain of chicks fed chelated products were significantly higher than that of chicks fed control(P＜0.05).Combination of Cu and Zn chelates(Cu-Zn-Met) tended to show the best growth rate and feed conversion ratio. Nutrient digestibilities were not affected by dietary treatments. Serum IgG level of chicks fed Cu-Zn-Met was significantly higher than that of chicks fed control(P＜0.05). Gizzard erosion index was not significantly different among treatments. Contents of Cu and Zn in liver were not significantly affected by dietary treatments, whereas excretions of these minerals were significantly affected by dietary treatments.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.281-286
• /
• 2003

This study presents the results of investigations with the object to determine the resistance to sulfuric acid for some kinds of cements containing 0%-70% of slag powder. The specimen is immersed 5% H$_2$SO$_4$ solution after the 28th days, is measured chemical analysis, XRD, SEM and etc after the immersed 35th days and is measured the erosion depth after the immersed 168th days. The results of experiment are founded out that alumina cement containing slag power was excellent at a point of view for the sulfuric acid resistance and the erosion depth was suitable to the evaluated method of the sulfuric acid resistance in the stead of the evaluated method of weight loss.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.2
• /
• pp.43-52
• /
• 1999

This study was carried out to verify results of the nursery seedbeds. From November of 1997 to September of 1998, the artificial banking slopes in the greenhouse of the College of Agriculture and Life Sciences, Seoul National University were seeded with the mixtures of those species. Most of exotic species showed relatively poor development of root as short as 30cm. Also the green weight of root biomass of the native species was more than two times than that of the exotic species. On the other hand, it was found that the exotic species have relatively well-developed fine roots. Thus, it was concluded that the seed-mixture of the native species with long and thick roots and the exotic species with fine roots be the most effective method for topsoil erosion control on banking-slopes. The artificial rainfall system treatment(30mm/hr, 60mm/hr, 100mm/hr) on $30^{\circ}$ banking-slopes did not cause any significant change in the amount of soil loss by erosion. The root system was best developed in the plot of 1,000 seedlings per square meter and it performed well for soil erosion control. Consequently, in the case of seeding of single herbaceous species without mixing any woody seeds, the expected seedlings were 1,000 to 2,000 per square meter.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.9
• /
• pp.1322-1327
• /
• 2006

An experiment was conducted to investigate the effects of supplemental copper (Cu) chelates (methionine, chitosan and yeast) on the performance, nutrient digestibility, serum IgG level, gizzard erosion, Cu content in the liver and excreta and the level of total cholesterol in breast muscle and serum of broiler chickens. Two hundred and forty hatched broiler chickens (Ross$^{(R)}$ 208) were assigned to 4 treatments: control, 100 ppm Cu in methionine chelate (Met-Cu), 100 ppm Cu in chitosan chelate (Chitosan-Cu) and 100 ppm Cu in yeast chelate (Yeast-Cu). Each treatment had six replicates of 10 (5 males+5 females) birds each. Weight gain and feed intake tended to be higher in Cu chelate treatments than the control; weight gain was significantly higher in the Met-Cu chelate treatment and feed intake was significantly higher in the Yeast-Cu chelate treatment than the control (p<0.05). Feed/gain was significantly different between treatments in which Met-Cu was lowest followed by the control, Chitosan-Cu and Yeast-Cu. DM availability was increased by Cu chelates among which chitosan-Cu showed the highest DM availability. Cu chelates supplementation tended to increase gizzard erosion index, and Cu content in the liver was highest in the Met-Cu treatment. Supplementation of Cu chelates tended to decrease total cholesterol level in breast muscle and serum but tended to increase the level of HDL in serum. It was concluded that dietary supplementation of 100 ppm Cu in chelates increased weight gain, feed intake and DM availability. Met-Cu was more effective than Chitosan-Cu or Yeast-Cu in improving productivity of broiler chickens.