• 대한기계학회논문집B
• /
• 제37권8호
• /
• pp.759-765
• /
• 2013

동축형 전단 분사기의 액적분포 균일도 및 혼합성능을 개선하기 위해 고안한 액체로켓 엔진용 동축형 다공성 분사기의 개발에 앞서 다공성재를 분사기에 적용하기 위해 다공성재를 통과하는 압축성 유체의 압력강하 특성을 파악하였다. Non-Darcy 유동의 압력강하는 점성력과 관성력으로 인한 손실을 포함하는 Forchheimer 방정식을 이용하여 도출할 수 있으며, 이 때 다공성재의 형상인자인 투과율과 관성력의 영향을 나타내는 Ergun 상수를 이용하여 다공성재를 통과하는 압축성 유체의 압력강하를 예측할 수 있다. 본 연구에서는 다공성재의 압력강하 특성을 나타내는 투과율와 Ergun 상수를 작동유체의 압력강하에 대한 함수로 나타내었으며, 최종적으로 이를 일반화하여 pore의 크기에 따라 압력강하를 예측할 수 있는 관계식을 도출하였다.

• 대한기계학회논문집B
• /
• 제24권3호
• /
• pp.419-425
• /
• 2000

Multiple layer of wire screen is widely used in many compact devices to filter particulates and to heat or cool fluids. However, data of flow resistance and heat transfer through such layers are rare to find and thus they are experimentally investigated in this study. Compressed air is made to flow through it to find the Ergun constants over a wide range of the Reynolds number. Also, unsteady heating of the wire screen is performed to find the equivalent heat transfer coefficient between the screen and the air by fitting the unsteady air temperature. The obtained coefficients are expressed in terms of the Reynolds number and the Prandtl number.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권2호
• /
• pp.244-251
• /
• 2009

Porous media have especially large surface area per volume, which contain complex fluid passage. If porous media can be applied to cool a CPU or an electronic device with large heat dissipation, it could result in heat transfer enhancement due to the enlargement of the heat transfer area and the flow disturbance. This study is aimed to identify the heat transfer and pressure drop characteristics of high-porosity metal foams in a horizontal channel. Experiment is performed with the various heat flux, velocity and pore density conditions. Permeabilities, which is deduced from Non-Darcy flow model, become lower with increasing pore density. Nusselt number also decreases with higher pore density. High pore density with same porosity case shows higher pressure loss due to the increase of surface area per unit volume. The fiction factor decreases rapidly with increase of Reynolds number in Darcy flow region. However, it converges to a constant value of the Ergun coefficient in Non-Darcy flow region.

• 설비공학논문집
• /
• 제11권2호
• /
• pp.185-192
• /
• 1999

Effective thermal conductivities and pressure-drop-related properties of aluminum foam metals have been measured. The effects of porosity and cell size in the aluminum foam metal are investigated in detail. The porosity of the foam metal, considered in the present study, varies from 0.89 to 0.96 and the cell size from 0.65㎜ to 2.5㎜. The effective thermal conductivity is evaluated by comparing the temperature gradient of the foam metal with that of the thermal conductivity-known material. The pressure drop in the foam metal is measured by a highly precise electric manometer while air is flowing through the aluminum foam metal in the channel. The results obtained indicate that the effective thermal conductivities are found to be increased with a decrease in the porosity while the effective thermal conductivities ire little affected by the cell size at a fixed porosity. However, the pressure drop is strongly affected by the cell size as well as the porosity. It is seen that the pressure drop is increased as the cell size becomes smaller, as expected. The minimum pressure drop is obtained in the porosity 0.94 at a fixed cell size. A new correlation of the pressure drop is proposed based on the permeability and Ergun's coefficient for the aluminum foam metal.