• 제목/요약/키워드: Erbium-doped fiber

검색결과 140건 처리시간 0.021초

In situ cavity loss measurements of a mode-locked erbium-doped fiber ring laser by thed relaxation oscillation frequency method

  • Jhon, Young-Min;Kim, Bong-Kyu;Kim, Dong-Hwan;Kim, Myong-Wook;Kim, Sang-Kuk;Choi, Sang-Sam
    • Journal of the Optical Society of Korea
    • /
    • 제4권1호
    • /
    • pp.11-13
    • /
    • 2000
  • We experimentally measured the cold cavity loss of a mode-locked erbium-doped fiber ring laser in situ by using the relaxation oscillation frequency method. The relaxation oscillation frequency is measured for various pumping powers and the data is fitted by the least squares method with a theoretical curve of parameters including the cavity loss. We obtained a cavity loss of 15.3$\pm$0.5 dB which was found to agree with the results of direct transmission loss measurements.

Experimental Evaluation of Frequency Characteristics of Gain-saturated EDFA for Suppression of Signal Fluctuation in Terrestrial Free-space Optical Communication Systems

  • Yoo Seok, Jeong;Chul Han, Kim
    • Current Optics and Photonics
    • /
    • 제7권1호
    • /
    • pp.28-32
    • /
    • 2023
  • Frequency characteristics of gain-saturated erbium-doped fiber amplifier (EDFA) are experimentally evaluated to mitigate the optical signal fluctuation induced by atmospheric turbulence in terrestrial freespace optical communication systems. Here, an acousto-optic modulator (AOM) is used to emulate optical signal fluctuations induced by atmospheric turbulence. The waveform which is generated in proportion to the refractive-index structural parameters is used to drive the AOM at various periodic frequencies. Thus, the dependence of the signal fluctuation suppression on the frequency is evaluated. The experiment is conducted using a periodic frequency sweep of the AOM driving voltage waveform and signal input power variation of the amplifier. It is observed that a low periodic frequency and high input signal power effectively suppress the optical signal fluctuation. This study evaluates the experimental results from the high-pass filter and gain-saturation characteristics of the EDFA.

파장 분할 다중화에 적용가능한 고농도 알루미늄이 포함된 에르븀첨가광섬유의 제조 (The Ffabrication of Erbium Doped Fiber with High Al-concentration for Wavelength Division Multiplexing)

  • 전정우;서한?;조윤희;고석봉;정기태;최성일;최봉수
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 1997년도 Advance Program of 14th optics andquantum Electronics conference, 1997제14 회 광학 및 양자전자 학술 발표회 논문 요약집
    • /
    • pp.24-24
    • /
    • 1997
  • PDF

마하젠더 간섭계와 EDFA를 이용한 온도와 스트레인을 동시에 측정하는 광섬유 브래그 격자 센서 (Fiber Bragg grating sensor using a Mach-Zehnder interferometer and EDFA for EDFA for simultaneous measurement of strain and temperature.)

  • 최민호;김부균;정재훈;이병호
    • 한국광학회지
    • /
    • 제12권5호
    • /
    • pp.371-375
    • /
    • 2001
  • 온도 변화에 민감한 1480 nm LD로 펌핑되는 erbium doped fiber와 단일 광섬유 브래그 격자를 사용하여 스트레인과 온도를 동시에 측정할 수 있는 센서 헤드를 구성하였고 optical spectrum analyzer (OSA) 대신에 마하젠더 간섭계를 demodulator 로 사용하여 측정 정밀도와 속도를 향상 시켰다. 출력 신호의 진폭 변화로 측정한 온도의 최소 측정 단위는 0.05$^{\circ}C$이고 위상 변화로 측정한 스트레인의 경우는 0.1$\mu$strain으로서 0.07 nm의 측정 해상도를 가지는 OSA를 demodulator로 사용하는 경우보다 측정 정밀도가 각각 140배 이상과 700배 이상 향상되었음을 볼 수 있었다.

  • PDF

Multiwavelength Erbium-doped Fiber Ring Laser with Adjustable Line Power using Variable Attenuators and DWDM

  • Lee, Hojoon
    • 한국광학회지
    • /
    • 제25권3호
    • /
    • pp.146-149
    • /
    • 2014
  • The homogeneous line broadening in EDF leads to unstable lasing and strong mode competition. In this paper a multiwavelength fiber ring laser that overcomes these effects by using variable attenuators between the DWDM and $1{\times}N$ coupler, has been proposed. Fiber ring lasers with four and eight wavelength outputs are implemented, and we show that the output powers can be adjusted with stable operation. The EDF ring laser has one four-wavelength output and four of single wavelengths, with OSNR of 50 and 60 dB respectively.

Gyroscope용 광대역폭 Erbium 첨가 광섬유 광원의 구성과 특성 측정 (Construction and characterization of broadband erbium-doped fiber sources for gyroscope)

  • 임경아;진영준;박희갑
    • 한국광학회지
    • /
    • 제8권4호
    • /
    • pp.320-326
    • /
    • 1997
  • Erbium 첨가 광섬유를 이용하여 광섬유 자이로스코프용 광대역폭 광원을 구성하였다. 광원의 구성방식을 달리하며 펌프 power에 따른 광원의 출력 power, 파장선폭, 중심파장을 측정하여 방식간에 이를 비교하였다. 시도된 4가지의 구성방식 중에서 'double pass'방식의 경우에 25 mW의 비교적 낮은 펌핑(파장 1.48.mu.m)으로 5.5 mW의 가장 큰 출력 power를 얻었으며, 충분히 펌핑하는 경우에 펌프 power 변화에 대한 중심파장 변화율이 거의 0에 가까운 안정된 특성을 얻을 수 있었다. 'Amplifier/source'방식은 광원의 출력은 가장 작았으나, 자이로 검출기에 입사되는 power면에서 다른 방식에 비해 최소한 100배 이상 큰 결과를 얻었다. 광원으로의 귀환 수준이 증가함에 따라 파장선폭은 증가했으나 출력 power는 감소했으며 귀환 수준 변화에 따른 중심파장의 변화가 크게 나타나서 귀환광이 자이로의 scale factor에 큰 영향을 미칠 것임을 예측할 수 있었다.

  • PDF

광대역폭 Erbium 첨가 광섬유 광원의 중심파장 안정성 (Mean wavelength stability of broadband erbium-doped fiber sources)

  • 진영준;박희갑
    • 한국광학회지
    • /
    • 제8권6호
    • /
    • pp.476-481
    • /
    • 1997
  • 0.98$\mu\textrm{m}$ 파장으로 펌핑되는 광대역폭 erbium 첨가 광섬유 광원에서 중심파장의 변화를 최소화할 수 있는 최적 동작 조건을 실험적으로 도출하였다. 중심파장의 안정을 위한 최적 조건은 광원이 isolation된 경우와 광원에 귀환광이 존재하는 경우에 각기 다르게 나타났다. 귀환광이 있는 경우에은 isolation된 경우에 비해 적정 펌프 power가 낮은 power영역에서 존재하였으며 더욱 넓은 펌프 power 범위에 걸쳐 중심파장의 변화가 거의 없는 것으로 나타났다. 다만 isolation된 경우에 비해 광출력이 감소하였으며 중심파장의 변화가 귀환수준의 변화에 대해 민감하였다. 따라서 귀환수준만 일정하게 유지된다면 귀환광이 존재하는 경우에 중심파장 안정성면에서 더 나은 특성을 얻을 수 있으며, 광원에 일정한 수준의 dc 귀환광을 넣어줌으로써 중심파장 안정성을 강화시킬 수 있다.

  • PDF