• 한국광학회지
• /
• 제5권1호
• /
• pp.125-130
• /
• 1994

광섬유 레이저의 수동형 모우드록킹을 위한 새로운 공진기 구조를 제안하고 이를 실험하였다. 광섬유 레이저 공진기의 한쪽 끝에는 이색성 평면경을 부착하였으며, 다른쪽 끝은 긴길이의 광섬유 Sagnac loop로 이루어진 비선형 loop mirror로 구성하였다. Er 첨가 광섬유 레이저와 Nd 첨가 광섬유 레이저의 각각의 경우에 대한 모우드록킹의 실험결과를 기술하였다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.321-335
• /
• 1999

Erbium(Er) doped LiNbO3(Er:LiNbO3) single crystal gibers were grown free of cracks along the c-axis by micro-pulling down method. the Er3+ concentration was distributed homogeneously along the growth axis. The samples for optical characterization were cut from as-grown single crystal fibers and polished. When the 980 nm light was incident on the sample, upconversion phenomena were observed at the green range of wavelength 510~570 nm. In addition, the intensity of upconversion was remarkably increased by increasing the concentration of Er2O3 dopant in as-grown Er:LiNbO3 crystals.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.140-142
• /
• 1989

1.54um 파장에서 최대 형광을 나타내는 ZrF4-BaF2-LaF3-AlF3-NaF : ErF3 유리를 built-in-casting 법에 의해 제조하였다. Er+3 이온을 0.2몰부터 4몰까지 첨가하였으며, Er+3 이온의 4I13/2 준위의 lifetime 은 Er+3 이온 0.2몰부터 2몰까지 28msec로 최대값을 갖으며 4몰일때는 급격히 감소하였다.

• ETRI Journal
• /
• 제23권3호
• /
• pp.97-105
• /
• 2001

$1.6\;{\mu}m$ emission originated from $Pr^{3+}:\;(^3F_3,\;^3F_4)\;{\longrightarrow}\;^3H_4$ transition in $Pr^{3+}-\;and\;Pr^{3+}/Er^{3+}$-doped selenide glasses was investigated under an optical pump of a conventional 1480 nm laser diode. The measured peak wavelength and fullwidth at half-maximum of the fluorescent emission are ~1650nm and 120nm, respectively. A moderate lifetime of the thermally coupled upper manifolds of ${\sim}212{\pm}10{\mu}s$ together with a high stimulated emission cross-section of ${\sim}(3{\pm}1){\times}10^{-20}\;cm^2$ promises to be useful for $1.6{\mu}m$ band fiber-optic amplifiers that can be pumped with an existing high-power 1480 nm laser diode. Codoping $Er^{3+}$ enhances the emission intensity by way of a nonradiative $Er^{3+}:\;^4I_{13/2}\;{\longrightarrow}\;Pr^{3+}:\;(^3F_3,\;^3F_4)$ energy transfer. The Dexter model based on the spectral overlap between donor emission and acceptor absorption describes well the energy transfer from $Er^{3+}$ to $Pr^{3+}$ in these glasses. Also discussed in this paper are major transmission loss mechanisms of a selenide glass optical fiber.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1998년도 제15회 광학 및 양자전자 학술발표회 논문집
• /
• pp.88-89
• /
• 1998

0.7 kHz linewidth, single-frdquency operation was achieved in apolarization-maintaining Er3+-doped filber ring laser at 1547.7 nm with a compact strure using a filber bragg grating (FBG) and a circulator. The single-frequency operation optput power was 3 mW.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.342-350
• /
• 2010

An optimal wideband gain flattened hybrid erbium-doped fiber amplifier/fiber Raman amplifier (EDFA/FRA) has been introduced. A new and effective optimization method called particle swarm optimization (PSO) is employed to find the optimized parameters of the EDFA/FRA. Numerous parameters which are the parameters of the erbium-doped fiber amplifier (EDFA) and the fiber Raman amplifier (FRA) define the gain spectrum of a hybrid EDFA/FRA. Here, we optimize the length, $Er^{3+}$ concentration, and pump power and wavelength of the EDFA and also pump powers and wavelengths of the FRA to obtain the flattest operating gain spectrum. Hybrid EDFA/FRA with 6-pumped- and 10-pumped-FRAs have been studied. Gain spectrum variations are 1.392 and 1.043 dB for the 6-pumped- and 10-pumped-FRAs, respectively, in the 108.5 km hybrid EDFA/FRAs, with 1 mW of input signal powers. Dense wavelength division multiplexing (DWDM) system with 60 signal channels in the wavelength range of 1529.2-1627.1 nm, i.e. the wide bandwidth of 98 nm, is studied. In this work, we have added FRA's pump wavelengths to the optimization parameters to obtain better results in comparison with the results presented in our previous works.

• 한국결정성장학회지
• /
• 제10권6호
• /
• pp.389-393
• /
• 2000

본 연구에서는 $\mu$-PD법으로 Er : Mg : $LiNbO_3$화이버 결정을 MgO의 첨가량을 달리하여 성장시켰으며, 첨가물 농도에 따른 성장조건과 PL 특성에 관해 조사하였다. 또한,성장한 결정의 투과 스펙트럼으로부터 Er : Mg : $LiNbO^3$에서 $Er^{3+}$ 의 에너지 준위구조를 계산하였다. Crack과 bubble등의 결함이 없는 결정은 after-beater를 조정하여 0.5 mm/min 이하의 성장속도에서 얻을 수 있었다. MgO의 농도에 따른 PL강도는 0.6 mol% $Er_2O_3$와 3 mol% MgO가 첨가된 Er : Mg : $LiNbO_3$결정에서 가장 강한 형광강도가 관측되었다. 또한, 에너지 준위 $^4S_{3/2}$에서 기저준위로 방출되는 빛이 가장 강했으며 1530 nm의 형광은 비방출천이 및 형광방출 등의 원인에 의한 $^4I_{13/2}$ 준위에서의 여기전자 감소가 형광강도 감소의 원인임을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.907-908
• /
• 2013

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.357-361
• /
• 2013

A regenerative Er-doped fiber amplifier system for a high-repetition-rate optical pulse train is investigated for the first time. A signal pulse train with a wavelength tuning range of 18 nm is produced by a passive mode-locked fiber laser based on a nonlinear polarization rotation technique. In order to realize the amplification, an optical delay-line is used to achieve time match between the pulses' interval and the period of pulse running through the regenerative amplifier. The 16 dB gain is obtained for an input pulse train with a launching power of -30.4 dBm, a center wavelength of 1563.4 nm and a repetition rate of 15.3 MHz. The output properties of signal pulses with different center wavelengths are also discussed. The pulse amplification is found to be different from the regenerative amplification system for CW signals.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1257-1262
• /
• 2008

A long-distance remote sensing of temperature and current based on a fiber Bragg grating (FBG) is proposed and demonstrated. The thermal expanding effect of the epoxy and the Er-doped fiber ring laser (EFRL) are applied to the sensor system to enhance the temperature and current sensitivity. An EFRL with a 5 km-single-mode fiber and a FBG shows a high extinction ratio of more than 60 dB and a low power fluctuation of less than 1 dB. The metal wires are used to supply the current to the sensors. When the NOA65 puts on the FBG as a thermal expanding material, the temperature and current sensitivity of the lasing wavelength shift are about $30\;pm/^{\circ}C$ and 3pm/mA, respectively. The proposed sensing scheme is useful for measurement of current or temperature at a distant object of more than several km.