• International Journal of Railway
• /
• 제3권1호
• /
• pp.14-18
• /
• 2010

This paper describes design and characteristic analysis of long primary type linear synchronous motor (LSM) for high speed train system. LSM is designed using loading distribution method and magnetic equivalent circuit. For characteristic analysis of LSM, analytical and numerical methods are applied. Analytical method for solving the magnetic field distribution of the analytic model is based on the Maxwell’s equations. Using the characteristic equation and magnetic equivalent circuit, we analyze the effect of variation of parameters, and then we validate the result by comparing with numerical method by finite element method (FEM). We compare the analytical method with numerical method for analyzing the effect by variable parameters. This result will be useful of design and forecast of performance without FEM.

• Journal of Magnetics
• /
• 제21권4호
• /
• pp.570-576
• /
• 2016

The shape optimization of the stator and the rotor is important for electrical motor design. Among many motor design parameters, the stator tooth and yoke width are a few of the determinants of noload back-EMF and load torque. In this study, we proposed an equivalent magnetic circuit of motor stator for efficient stator tooth and yoke width shape optimization. Using the proposed equivalent magnetic circuit, we found the optimal tooth and yoke width for minimal magnetic resistance. To verify if load torque is truly maximized for the optimal tooth and yoke width indicated by the proposed method, we performed finite element analysis (FEA) to calculate load torque for different tooth and yoke widths. From the study, we confirmed reliability and usability of the proposed equivalent magnetic circuit.

• 대한전자공학회논문지TC
• /
• 제38권12호
• /
• pp.49-57
• /
• 2001

이 논문에서는 실리콘 기판 등가 회로 모델과 새로운 모델 파라미터 추출 방법을 보인다. 등가 회로 모델을 해석함으로써 회로 블록 사이의 기판 커플링 특성을 고찰하고, 커플링의 크기를 회로 동작 주파수와 특성 주파수(시스템의 폴과 제로 주파수)를 사용하여 분석함으로써 기판 커플링의 물리적 특성을 정량적으로 해석하였다. 제안된 등가회로 모델과 모델 파라미터 추출 방법의 정확성과 타당성을 실험적으로 검증하기 위하여 표준 CMOS 공정을 사용하여 다양한 거리와 기판 저항, 그리고 가드링 구조를 갖는 테스트 패턴을 설계, 제작하고 100 MHz-20 GHz 주파수 영역에서 측정하였다. 그리고 실리콘 기판 등가 회로 모델 을 사용하여 HSPICE를 사용하여 시뮬레이션하고 그 결과를 측정 결과와 비교함으로써 제안된 회로 모델과 파라미터 추출 방법의 정확성을 보였다. 따라서 등가 회로 모델과 파라미터 추출 방법은 정확한 혼성 신호 회로 디자인과 효과적인 시스템의 성능 검증에 유용하게 사용될 수 있다.

• 센서학회지
• /
• 제10권2호
• /
• pp.142-147
• /
• 2001

인터디지털 표면음파 변환기의 교차장 모델에 기초한 전송선 등가회로를 사용하여 SPICE에 의한 SAW 필터의 효율적인 시뮬레이션 기법을 제안하였다. 표면음파의 전파를 전송선으로 모델하므로 인터디지털 변환기의 등가회로에서는 주파수 의존 회로소자가 필요하지 않게 된다. 그래서 주파수 의존 회로소자에 대한 등가회로를 근사적으로 구하지 않아도 되고, 필터의 등가회로에 작은 수의회로소자를 사용하므로 시뮬레이션 시간도 많이 단축된다. 삽입손실, 입력 어드미턴스, 통과대역 리플, 그리고 고조파 주파수 응답과 같은 SAW 필터 특성에 대한 시뮬레이션을 통하여 제안된 기법의 유용성을 보였다.

• Journal of Power Electronics
• /
• 제13권6호
• /
• pp.1008-1015
• /
• 2013

By using fractional calculus and the circuit-averaging technique, the modeling and analysis of a Buck converter with fractional order inductor and fractional order capacitor in discontinuous conduction mode (DCM) operations is investigated in this study. The equivalent averaged circuit model of the fractional order Buck converter in DCM operations is established. DC analysis is conducted by using the derived DC equivalent circuit model. The transfer functions from the input voltage to the output voltage, the duty cycle to the output voltage, the input impedance, and the output impedance of the fractional order Buck converter in DCM operations are derived from the corresponding AC-equivalent circuit model. Results show that the DC equilibrium point, voltage ratio, and all derived transfer functions of the fractional order Buck converter in DCM operations are affected by the inductor order and/or capacitor order. The fractional order inductor and fractional order capacitor are designed, and PSIM simulations are performed to confirm the correctness of the derivations and theoretical analysis.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권11호
• /
• pp.577-582
• /
• 2004

In this paper, lumped equivalent circuits for a conventional parallel directional coupler are proposed. This equivalent circuits only have self inductance and self capacitance, so we can design exact lumped equivalent circuit. The equivalent circuit and design formula for the presented lumped element coupler is derived based on the even- and odd-mode properties of parallel-coupled line. By using the derived design formula, we have designed the 3dB and 4.7dB MMIC couplers at the center frequency of 3.4GHz and 5.6GHz respectively. Measurements for the designed MMIC directional couplers show at 4dB and 5.2dB-coupling value at the center frequency of 3.4GHz and 5.6GHz. Excellent agreements between simulation results and measurement results on the designed directional couplers show the validity of this paper

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권8호
• /
• pp.368-374
• /
• 2002

In this paper, we introduce a procedure to obtain a equivalent circuit of comb-line band pass filter. By employing equivalent circuits of each asymmetrical coupled line. we composed the full equivalent circuit of comb-line bandpass filter and derived simple design equations for extracting each line's impedance. To show the validity of design equations, we simulated and fabricated a planar type comb-line bandpass filter, which has center frequency 1.8㎓, band-width 50㎒ and four resonators. The resulting filter is very compact, have broad stop band with the second pass band centered at four times the center frequency of the first pass band. The experimental results show exact performances of design specification.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권3호
• /
• pp.356-364
• /
• 2015

The transmission performance of TSV considering the effect of electronic-thermal coupling is an new challenge in three dimension integrated circuit. This paper presents the thermal equivalent circuit (TEC) model of the TSV, and discussed the thermal equivalent parameters for TSV. Si layer is equivalent to transmission line according to its thermal characteristic. Thermal transient response (TTR) of TSV considering electronic-thermal coupling effects are proposed, iteration flow electronic-thermal coupling for TSV is analyzed. Furthermore, the influences of TTR are investigated with the non-coupling and considering coupling for TSV. Finally, the relationship among temperature, thickness of $SiO_2$, radius of via and frequency of excitation source are addressed, which are verified by the simulation.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.902-909
• /
• 2018

This study investigates the influences of different core parameters on the dynamic performances, such as rise time and overshoot, in pulse transformers for the triggering circuit of SCRs. First, a simplified transformer equivalent circuit, which emerges from a standard transformer equivalent circuit, is developed to analyze the step response. Second, the relations between the dynamic performances and the parasitic parameters are calculated by the simplified equivalent circuit. Third, the variations of rise time and overshoot, which are vital to the stability of triggering SCRs, with different core parameters, such as mechanic dimensions and topologies, are comprehensively investigated by analyzing the parasitic parameters. Finally, prototype transformers are fabricated to experimentally validate the analysis. The presented method can practically instruct the design of a pulse transformer for triggering SCRs.

• 전기의세계
• /
• 제21권1호
• /
• pp.7-12
• /
• 1972

General steady state equivalent circuits are derived for the family of single phase motor having two windings with non-quadrature. First, the fundamental voltage equations of motor are derived by Faraday-Krichhoff's low in the fiew of the flux distribution in the modified motor with Kron primitive machine. Those equations are arranged in to f-b equations by transformation matrix. To using the above equations for circuit; 1) The concept of current-source was much help to sove the realtions between matrix impedance equation and circuit analysis 2) The simplification of the circuit to the mutual impedance matrix elements is easy to considerations of motor characteristics in the case of inserted external auxiliary winding impedance. Finally, this equivalent circuit showing as a single phase induction motor with quadrature winding is described by each conditions.