• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1126-1129
• /
• 2000

The equivalent transformation of a brushless DC motor into an separately exited DC motor has been possible with the vector control technique. Vector control is an effective technique for controlling variable speed drives of brushless DC motors. Conventional vector controllers, however, suffer from electrical machine parameter variations because these controllers depend on the parameters. This paper presents the vector control of brushless DC motor using a neural network. In the proposed method, a neural network is employed as on-line estimator of the nonlinear dynamic equations of brushless DC motor. The neural network based vector controller has the advantage of robustness against machine parameter variations as compared with conventional vector controller The simulation results using Matlab/Simulink verify the useful of the proposed method.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2524-2529
• /
• 2008

The thermal system like a combustion chamber is believed to experience a significant instability problem with vibration in case that the thermal energy or the acoustic energy are transformed into a different form through a relevant path. This study deals with a numerically- predicted, Thermoacoustic instability in a Rijke tube by using a non-linear model for a heat source. The heating part where the energy transformation occurs actively is modeled after simulating two-dimensional cylinder case with constant surface temperature, and a nonlinear model that accounts for the transfer function of magnitude- and phase-characteristics is properly implemented so as to be dependent on the pulsation strength in the tube. The heat source model is observed to result in equivalent Thermoacoustic instabilities in the Rijke tube except low flow-rate cases in which the natural convection is dominant.

• Journal of Magnetics
• /
• v.10 no.1
• /
• pp.28-32
• /
• 2005

The magnetic properties and ordering behavior of Nb-doped FePt alloy films prepared by dc-magnetron sputtering were investigated. It was found that Nb addition retarded the ordering reaction from the disordered face-centered-cubic (fcc) Al phase to the ordered face-centered-tetragonal (fct) L1₀ phase. The tetragonality (c/a ratio) of the ordered fct L1₀ phase increased with the Nb concentration. Nb addition hampered c-axis contraction during ordering, probably because the larger Nb atoms occupy Pt sites. Consequently, the coercivity and magnetocrystalline anisotropic energy of Nb-doped FePt alloy films are lower than those of un-doped FePt film under equivalent annealing conditions.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.175-178
• /
• 2010

동하중의 영향을 받는 구조물의 효율적인 구조 해석 및 최적화 수행을 위해 동하중을 등가정하중으로 변환하는 방법이 요구된다. 이 때 적절한 자유도를 선정하여 등가정하중을 부여하는 것이 중요하다. 기존방법에서는 시스템 축소기법을 통해 일정 개수 이상의 주자유도를 선택하여 등가정하중을 부여하고 그 결과 변위가 동하중 하에서의 변위와 같도록 하였다. 그러나 보수적인 결과를 얻기 위한 제한 조건의 지배적인 성격으로 인하여 등가정하중 하에서의 변위가 지나치게 크게 나타나 그 효율성이 떨어지게 되었다. 본 연구에서는 등가정하중의 변환에 있어서 효율성을 높이는 방안을 제안한다. 제안기법은 보수적 결과를 얻는 범위 내에서 과도응답해석 결과와의 오차를 크게 줄일 수 있다. 수치예제를 통해 제안기법의 결과를 기존 기법의 결과와 비교해본다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.9
• /
• pp.600-608
• /
• 1988

Although the structure of brushless dc motor is similar to that of a Permanent magnet synchronous motor, its torque-speed characteristcis are the same as those of a permanent magmet dc motor. The brushless dc motor drive systemcomposed of power converter including inverter, rotor positioning sensor and controller has been investigated for the purpose of position control when the motor is fed by a current controlled voltage source inverter. The equivalent transformation of a brushless dc motor into an separately exited dc motor has been possible with the vector control (field oriented control) technique. It is shown in this paper that the position control of a brushless dc mitor can be done fairly accurately only using q-axis current.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.517-520
• /
• 2004

In this paper, a PWM Cuk AC-AC converter is modelled by using complex circuit DQ transformation whereby the equivalent model is obtained which has the complete information of the Cuk converter. Using the model, the dynamicc characteristics equations such as state equations is analytically obtained. Finally, the PSIM simulation show the validity of the modelling and analysis.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.6
• /
• pp.477-483
• /
• 2020

This study proposes a DQ synchronous reference frame model of a series-parallel tuned inductive power transfer (SP-IPT) system. The wireless power transmission system experiences control difficulty because the transmitter-side controller cannot directly measure the receiver-side load voltages and currents. Therefore, a control-oriented circuit model that shows the dynamics of the IPT system is required to achieve a well-behaved controller. In this study, an equivalent circuit model of the SP-IPT system in a synchronously rotating reference frame is proposed using the single-phase DQ transformation technique. The proposed circuit model is helpful in modeling the dynamics of the voltages and currents of the transmitter- and receiver-side resonant tanks and loads. The proposed circuit model is evaluated using frequency- and time-domain simulation results.

• Journal of KIISE:Software and Applications
• /
• v.26 no.8
• /
• pp.1028-1038
• /
• 1999

본 논문에선 LR 문법의 부분 클래스를 동치인 LL 문법으로 변환하는 방법을 제시한다. 이 변환이 적용 가능한 문법을 확장된k`-transformable 문법이라 정의한다. 변환된 문법은 left-to-right 커버의 성질을 만족한다. 기존 연구에서 제시한 변환 방법은 LR 문법의 부분 클래스인 {{{{k`-transformable 클래스와 PLR 클래스를 LL 문법으로 바꾼다. 이 논문에서 제시하는 새로운 변환 방법의 적용 가능한 문법의 범위는 k`-transformable 클래스와 PLR 클래스를 포함한다. 기존의 커버링 성질을 만족하는 LL로의 문법 변환은 보편적인 LR 파서의 행동을 시뮬레이션하여 얻어진다. 이 과정에서 쉬프트, 리듀스 행동 이외에 무한의 가능성을 가진 스택 스트링의 유한 표현을 위해 리덕션 심볼에 대한 예상 행동이 추가된다. 본 논문에서는 파싱 문맥을 나타내는 LR 아이템들을 기존의 스택 스트링 표현 형태에 추가하여 스택 스트링 표현법을 정제하고, 리덕션 심볼에 대한 예상 방법을 확장하는 정형식을 제시한다. 이에 근거하여 LL 커버링 문법이 존재하는 클래스를 확장된 {{{{k`-transformable 문법으로 확장시킨다.Abstract A new transformation of a subclass of LR(k`) grammars into equivalent LL(k`) grammars is studied. The subclass of LR(k`) grammars is called extended k`-transformable. The transformed LL(k`) grammars left-to-right cover the original LR(k`) grammars. Previous transformations transform k`-transformable and PLR(k`) into LL(k`). The new transformation is more powerful in that it handles the extended k`-transformable subclass of LR(k`), which strictly includes k`-transformable and PLR(k`) classes. The previous covering transformations into LL grammars are obtained by simulating the actions of the conventional LR parser. Specially, a predict action of reduction goals is added to the action set in order to finitely represent stack string. In this paper, the stack string representation is refined by adding LR items to represent a parsing context, and the prediction of reduction goal is extended by generalizing the prediction formalism. Based on them, the previous grammar classes with LL({{{{k`) covering grammars are extended to extended k`-transformable grammars.

• The KIPS Transactions:PartD
• /
• v.13D no.4 s.107
• /
• pp.535-548
• /
• 2006

To formally describe business process, many business process languages have been so far specified with different origins and goals such as XPDL, BPML and BPELAWS. Especially, XPDL proposed by WfMC has been widely used in various business process environments for a long time. On the other hand, the necessity of a standard graphical notation for a business process may create BPMN driven by BPMI. Because BPMN is composed of graphical constructs which can be used to graphically depict business process, BPMN-formed business processes should ultimately be converted to their corresponding semantically equivalent business process language(XPDL). Then, the business process languages can be consequently executed by business process engines. In this paper, we proposed a transformation mechanism from BPMN to XPDL for a business process. By this paper, We minimized the difference between process designers and process execution modules as reducing the gap of semantics between BPMN and XPDL.

• Nuclear Engineering and Technology
• /
• v.7 no.4
• /
• pp.267-275
• /
• 1975

The low-lying resolved resonance structure of U-233 is investigated in terms of the Adler-Adler multilevel formalism. The resonance capture and fission cross sections of U-233 below 60 eV are calculated using Adlers' effective resonance parameters. The infinite dilution resonance integrals of U-233 are computed with the use of the Alders' parameters adjusted to fit the cross section data. It is found that the agreement of calculations with experiments is generally good over most of the energy region covered. A transformation of the Adlers' multilevel parameters into an equivalent set of the single level pseudoparameters is made for the use of the existing computer codes which are useful in the reactor calculations but do not have capability to use the multilevel parameters. The results of this transformation are presented in the form of a table.