• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.136-140
• /
• 2002

In this paper, newly constructed 5.6 ㎓ ring resonator by using a T-Junction and a parallel transmission line. The resonator's size reduced twice more than a current ring and a hair-pin resonator at this paper's center frequency The loaded Q value is 240∼250 at center frequency. also, It was explained by RLC equivalent equation for the resonator.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.258-264
• /
• 1999

In this study, a computer program was developed for analysis of the orthotropic curved ring sector plates. In the developing program , the thin-plate theory and multi-base coordinate system was adopted. The effect of design factors-boundary conditions, loading conditions, steel ratio, open angle, radius of curvature and relative flexural rigidity between slab and edge-beam-on the behavior of the circular ring sector plates were discussed. Also, the practical limitations was proposed to replace the problem of the orthotropic sector plate by equivalent rectangular plage.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.10
• /
• pp.1175-1180
• /
• 2014

In this paper, the open ring type DGS(Defected Ground Structure) resonator, applicable to MMIC(Monolithic Microwave Integrated Circuit), is proposed to improve phase noise characteristics of RF oscillator. This resonator is planar type, therefore, it easy to design miniaturrized., and takes relatively high Q value. Modeling the equivalent parameter of resonator is needed, when designing the RF oscillator with resonator. The mathematical method to solve the equivalent parameter of the resonator from the measured results of resonator is introduced in this paper. To verify the method, DGS resonator with 5.8 GHz center frequency is fabricated, for measuring characteristics and calculating the equivalent parameter. The result from this process is compared with the data of the ADS simulation, and as a result both were identical.

• East Asian mathematical journal
• /
• v.34 no.5
• /
• pp.615-621
• /
• 2018

Let R be a ring with the unity 1, and let e be an idempotent of R. In this paper, we discuss some symmetric property for the set $\{(a_1,a_2,{\cdots},a_n){\in}R^n:a_1a_2{\cdots}a_n=e\}$. We here investigate some properties of those rings with such a symmetric property for an arbitrary idempotent e; some of our results turn out to generalize some known results observed already when n = 2 and e = 0, 1 by several authors. We also focus especially on the case when n = 3 and e = 1. As consequences of our observation, we also give some equivalent conditions to the commutativity for some classes of rings, in terms of the symmetric property.

• Kyungpook Mathematical Journal
• /
• v.60 no.2
• /
• pp.307-318
• /
• 2020

This article concerns the class of rings which satisfy the property of inserting regular elements at zero products, and rings with such property are called regular-IFP. We study the structure of regular-IFP rings in relation to various ring properties that play roles in noncommutative ring theory. We investigate conditions under which the regular-IFPness pass to polynomial rings, and equivalent conditions to the regular-IFPness.

• East Asian mathematical journal
• /
• v.36 no.1
• /
• pp.73-79
• /
• 2020

A ring R is called generalized regular if for every nonzero x in R there exists y in R such that xy is a nonzero idempotent. In this paper, we observe some equivalent conditions for the generalized regular rings that are abelian in terms of idempotents, and we also investigate the primitivity of an idempotent for such a ring. By using the investigation, we characterize such a kind of rings that are noetherian by showing that an abelian generalized regular ring R is noetherian if and only if R is isomorphic to a direct product of finitely many division rings. We also observe some interesting consequences of our results.

• Communications of the Korean Mathematical Society
• /
• v.37 no.2
• /
• pp.399-407
• /
• 2022

In this paper, we continue to study the von Neumann regularity of rings whose essential maximal right ideals are GP-injective. It is proved that the following statements are equivalent: (1) R is strongly regular; (2) R is a 2-primal ring whose essential maximal right ideals are GP-injective; (3) R is a right (or left) quasi-duo ring whose essential maximal right ideals are GP-injective. Moreover, it is shown that R is strongly regular if and only if R is a strongly right (or left) bounded ring whose essential maximal right ideals are GP-injective. Finally, we prove that a PI-ring whose essential maximal right ideals are GP-injective is strongly π-regular.

• Bulletin of the Korean Mathematical Society
• /
• v.54 no.6
• /
• pp.1913-1925
• /
• 2017

Let R be a ring with identity. An ideal N of R is called ideal-symmetric (resp., ideal-reversible) if $ABC{\subseteq}N$ implies $ACB{\subseteq}N$ (resp., $AB{\subseteq}N$ implies $BA{\subseteq}N$) for any ideals A, B, C in R. A ring R is called ideal-symmetric if zero ideal of R is ideal-symmetric. Let S(R) (called the ideal-symmetric radical of R) be the intersection of all ideal-symmetric ideals of R. In this paper, the following are investigated: (1) Some equivalent conditions on an ideal-symmetric ideal of a ring are obtained; (2) Ideal-symmetric property is Morita invariant; (3) For any ring R, we have $S(M_n(R))=M_n(S(R))$ where $M_n(R)$ is the ring of all n by n matrices over R; (4) For a quasi-Baer ring R, R is semiprime if and only if R is ideal-symmetric if and only if R is ideal-reversible.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.516-519
• /
• 2012

This study proposes a method of an equivalent bell model in order to tune the beat period of a Korean bell. In a Korean bell having a slight asymmetry, each circumferential mode splits into a mode pair which has a slight difference in frequency, and the interaction of the mode pair makes a beat in vibration and sound. An equivalent bell model which consists of an axi-symmetric bell and an equivalent point mass, has the same mode property as in a real bell. The equivalent bell model is constructed by the finite element analysis based upon the theory of a revolutionary shell Using the equivalent bell model, the beat period is predicted when the bell thickness is locally decreased to improve the beat property. The predicted result is verified by experiment on a test bell. The proposed method is useful to save the time required for tuning the beat period of a large bell.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.1038-1043
• /
• 2002

The floating ring journal bearing is attraction for high-speed turbo machinery applications, including turbochargers and aircraft accessory equipment, because it is not only simple and easy to make and to replace in the field but also it seems to have adequate high speed stability characteristics. Therefore, an analysis method of dynamic properties of floating ring journal bearing is presented. The static equilibrium locus of inner film and outer film are calculated by using the impedance description. The equivalent stiffness and damping coefficients of floating ring journal bearing are composed by using the equilibrium of torque between inner film and outer film. Then, a stability analysis of turbocharger shaft system supported with floating ring journal bearing has been performed.