• 한국구조물진단유지관리공학회 논문집
• /
• 제21권2호
• /
• pp.46-52
• /
• 2017

염해에 노출된 콘크리트 구조물의 내구수명 평가는 매우 중요하므로 최근들어 결정론적 및 확률론적 방법을 통하여 내구수명을 평가하는 시도가 이루어지고 있다. Fick's 2nd 법칙에 근거한 내구수명 평가방법은 표면 염화물량과 확산계수의 시간의존성을 고려하여 합리적인 설계를 수행하고 있으나, 확률론적 방법에서는 이러한 영향이 고려되지 않고 있다. 본 논문에서는 시간에 따라 증가하는 표면염화물량을 유효 표면염화물량으로 고려한 뒤 시간의존성 확산계수를 고려하여 내구적 파괴확률을 도출할 수 있는 해석기법을 제안하였다. 표면염화물에 도달하는 기간을 10~30년으로, 표면염화물량을 $5.0{\sim}10.0kg/m^3$으로 변화시키면서 내구적 파괴확률을 평가하고 내구수명의 변화를 분석하였다. 제안된 기법은 결정론적 내구수명 평가방법의 해석조건을 동일하게 적용시키면서 설계인자의 확률 변동성을 고려할 수 있으므로 과다한 설계를 방지함으로서 합리적인 설계기법으로 적용할 수 있다.

• 대한기계학회논문집A
• /
• 제36권7호
• /
• pp.731-738
• /
• 2012

본 논문은 상용 유한요소코드인 ANSYS Workbench 12.1과 CFX 12.1을 이용하여 NREL Phase VI Rotor에 대한 공력특성을 입구풍속 7m/s 경우에 대해 연구하였다. 공탄성 효과를 고려하기 위해 약결합 양방향 유체구조 연성기법을 사용하여 타워구조를 제외한 로터파트에 대해서 해석이 수행되었다. 블레이드 끝단의 초기 피치각은 $3^{\circ}$로 설정하였고, 구조해석모델은 등가강성기법을 적용하였다. 신뢰성 있는 수렴판정 결과의 확보를 위해 블레이드 루터부의 굽힘모멘트를 실시간으로 모니터링 하였다. 해석의 신뢰성을 검증하기 위하여 해석결과를 NREL/NASA Ames 풍동 실험결과와 비교 분석하였다.

• 한국지진공학회논문집
• /
• 제5권6호
• /
• pp.65-76
• /
• 2001

지진하중을 받는 구조물의 시스템 연성요구도 산정과 비선형 지진거동 예측에 대한 연구는 성능에 기초한 내진설계에서 구조물의 내진성능을 평가하는데 있어서 매우 중요한 분야이다. 본 연구에서는 철골 모멘트골조 구조물에 대하여 비선형 시간이력해석에 의한 비선형 지진응답과 시스템 연성요구도를 산정하고, 그 결과를 비선형 정적해석을 이용한 능력스펙트럼법과 비교하였다. 예제구조물에 대한 내진성능평가는 ATC-40에서 제시된 능력스펙트럼법과 본 연구에서 제안한 다자유도 시스템으로부터 직접 산정된 대표응답을 이용한 개선된 능력스펙트럼법과 비교하였다. 본 연구에서 제안된 방법의 정확성과 타당성은 ATC-40에서 제시된 방법과 제안된 방법에 의한 결과를 비선형 시간이력해석에 의한 비선형 지진응답과 비교함으로써 검증하였다.

• Steel and Composite Structures
• /
• 제13권6호
• /
• pp.501-519
• /
• 2012

As an alternative to current conventional force-based assessment methods, the energy-based seismic performance of a code-designed 20-storey high-rise steel building is evaluated in this paper. Using 3D nonlinear dynamic time-history method with consideration of additional material damping effect, the influences of different restoring force models and P-${\Delta}/{\delta}$ effects on energy components are investigated. By combining equivalent viscous damping and hysteretic damping ratios of the structure subjected to strong ground motions, a new damping model, which is amplitude-dependent, is discussed in detail. According to the analytical results, all energy components are affected to various extents by P-${\Delta}/{\delta}$ effects and a difference of less than 10% is observed; the energy values of the structure without consideration of P-${\Delta}/{\delta}$ effects are larger, while the restoring force models have a minor effect on seismic input energy with a difference of less than 5%, but they have a certain effect on both viscous damping energy and hysteretic energy with a difference of about 5~15%. The paper shows that the use of the hysteretic energy at its ultimate state as a seismic design parameter has more advantages than seismic input energy since it presents a more stable value. The total damping ratio of a structure consists of viscous damping ratio and hysteretic damping ratio and it is found that the equivalent viscous damping ratio is a constant for the structure, while the equivalent hysteretic damping ratio approximately increases linearly with structural response in elasto-plastic stage.

• 한국정보처리학회논문지
• /
• 제6권11호
• /
• pp.2981-2988
• /
• 1999

연역데이터베이스는 외연적 데이터베이스인 사실들의 집합과 내포적 데이터베이스인 규칙들의 집합으로 구성된다. 이 규칙들을 계산하기 어렵기 때문에 규칙을 병렬로 계산하기 위한 많은 알고리즘들을 연구해 왔으나 만족스런 결과를 얻지 못하 였다 이 논문에서는 이행적 종속성을 가지는 선형적 재귀 규칙의 증명-이론적 의미를 비공유 병렬구조를 이용하여 효율적 으로 계산하는 새로운 방법을 제안한다 먼저 선형적 재귀규칙을 위한 둥가의 표현식이 존재함을 증명하고, 이 표현식을 근 거하여 선형적 재귀규칙을 계산하기 위한 알고리즘을 고안하며, 마지막으로 제안된 알고리즘의 성능을 분석한다

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.230-237
• /
• 2000

The wheel bearing in vehicles has been improved to unit module by joining a bearing to a hub in order to achieve weight reduction and easy assembly. Currently, the contact force between a raceway and balls of a bearing is applied as the external force in order to analyse the structure of the unit type bearings. In this paper, simplified boundary conditions are discussed for structure analysis of wheel bearing unit. From the procedure, the contact conditions of balls and race in wheel bearing unit are considered as equivalent non-linear spring elements. The end node of a spring element is constrained in displacement. And the external force of boundary conditions is applied at the contact point between tire and road. For the evaluation of this analysis, its results for the force of spring elements are compared with contact forces of calculated results. and also maximum equivalent stresses of analysis are compared with results of test at the flange of inner ring. The analysis results with proposed boundary conditions are more accurate than results from analysis which is generally used.

• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1187-1194
• /
• 2009

During the last decade, possibility of flaw occurrences has been rapidly increased world-widely as the increase of operating times of petro-chemical facilities. For instance, from a recent in-service inspection, three different sized surface cracks were detected in welding parts of a spherical oxygen holder in Korea. While API579 code provides corresponding engineering assessment procedures to determine crack driving forces, in the present work, numerical analyses are carried out for the cracked oxygen holder to investigate effects of complex geometry, analysis model and residual stress. With regard to the detailed finite element analysis, stress intensity factors are determined from both the full three-dimensional model and equivalent plate model. Also, as an alternative, stress intensity factors are calculated for equivalent plate model by employing the noted influence stress function technique. Finally, parametric structural integrity evaluation of the cracked oxygen holder is conducted in use of failure assessment diagram method, J/T method and DPFAD method. Effects of the geometry and so forth are examined and key findings from the simulations are fully discussed, which enables to determine practical safety margins of spherical components containing a defect.

• 한국지진공학회논문집
• /
• 제21권6호
• /
• pp.265-275
• /
• 2017

In order to improve the seismic performance of structures, friction pendulum system (FPS) is the most commonly used seismic isolation device in addition to lead rubber bearing (LRB) in high seismicity area. In a nuclear power plant (NPP) with a large self weight, it is necessary to install a large number of seismic isolation devices, and the position of the center of rigidity varies depending on the arrangement of the seismic isolation devices. Due to the increase in the eccentricity, which is the difference between the center of gravity of the nuclear structure and the center of stiffness of the seismic isolators, an excessive seismic response may occur which could not be considered at the design stage. Three different types of eccentricity models (CASE 1, CASE 2, and CASE 3) were used for seismic response evaluation of seismically isolated NPP due to the increase of eccentricity (0%, 5%, 10%, 15%). The analytical model of the seismic isolation system was compared using the equivalent linear model and the bilinear model. From the results of the seismic response of the seismically isolated NPP with increasing eccentricity, it can be observed that the effect of eccentricity on the seismic response for the equivalent linear model is larger than that for the bilinear model.

• Computers and Concrete
• /
• 제12권1호
• /
• pp.53-64
• /
• 2013

The curing temperature is known to influence the rate of mechanical properties development of early age concrete. In realistic sites the temperature of concrete is not isothermal $20^{\circ}C$, so the paper measured adiabatic temperature increases of four different concretes to understand heat emission during hydration at early age. The temperature-matching curing schedule in accordance with adiabatic temperature increase is adopted to simulate the situation in real massive concrete. The specimens under temperature-matching curing are subjected to realistic temperature for first few days as well as adiabatic condition. The mechanical properties including compressive strength, splitting strength and modulus of elasticity of concretes cured under both temperature-matching curing and isothermal $20^{\circ}C$ curing are investigated. The results denote that comparing temperature-matching curing with isothermal $20^{\circ}C$ curing, the early age concretes mechanical properties are obviously improved, but the later mechanical properties of concretes with pure Portland and containing silica fume are decreased a little and still increased for concretes containing fly ash and slag. On this basement using an equivalent age approach evaluates mechanical properties of early age concrete in real structures, the model parameters are defined by the compressive strength test, and can predict the compressive strength, splitting strength and elasticity modulus through measuring or calculating by finite element method the concreted temperature at early age, and the method is valid, which is applied in a concrete wall for evaluation of crack risking.

• 한국안전학회지
• /
• 제29권3호
• /
• pp.1-7
• /
• 2014

In this study, for the evaluation of the static and fatigue joining strength of the joint, the geometry of the cross-tension specimen was adopted. The specimens were produced with optimal joining force and fatigue life of the clinch joint specimens was evaluated. The material selected for use in this study was cold rolled mild steel (SPCC) with a thickness of 0.8 mm. The maximum tensile load was 708 N for the specimen with single point. The fatigue endurance limit (=42.6 N) per point approached to 6% of the maximum tensile strength at a load ratio of 0.1, suggesting that the joints are vulnerable to cross-tension loading during fatigue. Compared to equivalent stress and maximum principal stress, the SWT fatigue parameter and equivalent strain can properly predict the current experimental fatigue life. The SWT parameter can be expressed as $SWT=2497.5N^{-0.552)_f$.