• Journal of Navigation and Port Research
• /
• v.40 no.4
• /
• pp.197-205
• /
• 2016

Our country, which relies on maritime transport a majority of import and export trade volume and faced with unexpected accidents, it is difficult to operate the normal function of container terminal. It also caused by reliability issue raised is likely to be given a blow to the new volumes to attract and maintain existing volumes. Under this views, the container terminal is a situation that highlights the role of the harbor workers and cope with aggressive work to provide the best quality services to customers 365 days. On these grounds, the heavy work burden is passed on to the harbor workers and caused accidents every year. The study was analyzed the safety status of the container terminal under the real following the conditions as disaster status analysis, insufficient safety training circumstances and safety training from 2012 year to 2015 in the target current K.Y terminal. As a result of equipments safety training analysis, it shows that 2012 year happened 45 cases and 31 cases in 2013 year until not practicing the training over the Gantry Crane equipment. One hand 23 cases took place in 2014 while preparation training and the other intensive training period of 2015, 8 cases occurred. it shows that 2012 year happened 13 cases and 19 cases in 2013 year until not practicing the training over the Transfer Crane equipment. One hand 12 cases took place in 2014 while preparation training and the other intensive training period of 2015, 8 cases occurred. it shows that 2012 year happened 9 cases and 9 cases in 2013 year until not practicing the training over the Yard Tractor equipment. One hand 9 cases took place in 2014 while preparation training and the other intensive training period of 2015, 4 cases occurred. Because safety training of the container terminal was given to greatly impact on the mandatory safety training, self-educational enforcement and specified equipments safety training, hence the container terminal is to strengthen the safety education to prevent accidents in advance.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.33-44
• /
• 2015

Domestic plant construction sites have a tendency to become bigger, more various and complicated. Moreover frequency of industrial incident is increasing due to short project period, coexistence work condition and using heavy construction equipment. Installing safety facilities and safety training contribute to prevent incident. But mostly incident happens due to workers' unsafe action and wrong work method. Technically, it is very difficult for us to closely manage workers preventing incident. Therefore, the role of foreman who ordinarily works together with his workers is considered more important. Specific execution plan was drawn through industrial incident statistics from Ministry of Labor and questionnaire survey to interest parties(supervisor, safety staff and foreman). If foreman has raised sense of belonging and responsibility by conducting practical safety training for his workers, manages job site and receives proper compensation for these roles, it will be expected that it fully influences incident decrease.

• International Journal of Advanced Culture Technology
• /
• v.9 no.3
• /
• pp.334-344
• /
• 2021

The study has suggested a way to minimize safety accidents found in on-site firefighting activity by analyzing firefighters' [investigation report on accidents to on-sie workers]. The study result is described as follows. First, the result of [investigation report on on-site workers] shows that while accidents are found to most frequently have occurred to low-ranking firefighting officers such as Sobangsa and Sobanggyo and firefighting officers with career of less than 5 years, fire-extinguishing activity proved to be the most prone to accidents in the category of activity. Second, analysis performed to identify variance between injury extent and area based on cause of accident shows statistically significant variance. In addition, the result of verifying difference in cause of accident based on category of activity shows significant difference with 'falling over and sliding' being the highly likely cause of accident in fire containment and rescue activities and 'reckless move' being highly likely case of accident in emergency activities. Third, the result of verifying factors behind the extent of injury done to on-site workers shows that when accident is caused by 'incomplete behavior', it was found that the extent of injury is substantial. It was also found that rescue activity is accompanied by substantial extent of injury. As a solution to this, the study suggested ways to establish, extend and operate safety-specific curriculum for entrants, develop materials regarding risk prognosis training and explicate training-related regulations, set up safety management measure for a single squad team, upgrade performance of private protection equipment, institutionalize SOP by on-site activity stage, materialize and activate swift rescue team and increase objectivity and proficiency of safety accident investigation.

• International Journal of Advanced Culture Technology
• /
• v.8 no.2
• /
• pp.58-67
• /
• 2020

In this paper, the maintenance training manual of EV vehicle was produced by utilizing digital twin technology and various sensors such as IR-based light house tracking and head tracker. In addition, through digital twin technology and VR to provide high immersiveness to users, sensory content creation technology was secured through animation and effect realization suitable for EV vehicle maintenance situation. EV vehicle maintenance training manual is 3D engine programming and real-time creation of 3D objects and minimization of screen obstacles and selection of specific menus in virtual space in the form of training simulation. In addition, automatic output from the Head Mount Display (HUD), EV vehicle maintenance and inspection, etc., user can easily operate content was produced. This technology development can enhance immersion to users through implementation of detailed scenarios for maintenance / inspection of EV vehicles" and 3D parts display by procedure, realization of animations and effects for maintenance situations. Through this study, familiarity with improving the quality of education and safety accidents and correct maintenance process and the experienced person was very helpful in learning how to use equipment naturally and how to maintain EV vehicles.

• Journal of the Korean Society of Safety
• /
• v.39 no.3
• /
• pp.1-6
• /
• 2024

Polyester round slings are widely utilized in various work environments due to their lightweight, flexible nature and smooth surface that minimizes the risk of cargo abrasion or damage. However, specific guidelines intended to protect round slings from the damage caused by the sharp edges of cargo, thus preventing accidents in case the cargo falls, are lacking in South Korea. In this study, a comparative analysis was conducted on the regulations and guidelines related to round slings in South Korea and the United States. Further, experiments were carried out to determine the relationship between round slings and lifting accessories. The research identified specific shortcomings in the user manuals provided by round-sling manufacturers. Accordingly, certain measures were proposed for enhancing the operational safety of round slings: 1) establish criteria for edge protection of polyester round slings and 2) recommend standardization of the information provided by manufacturers. As developing new standards is a time-consuming task, this study proposes a method for enhancing the operational safety of round slings in the short term by introducing established safety standards from the United States-where safety has been proven over a considerable period of time-into the domestic context. In addition, it is recommended that edge criteria be permanently printed on the labels of round slings.

• Safety and Health at Work
• /
• v.13 no.3
• /
• pp.315-325
• /
• 2022

Background: Firefighters are required to carry self-contained breathing apparatus (SCBA), which increases the risk of musculoskeletal disorders. This study assessed the newly recruited firefighters' internal forces and potential musculoskeletal disorders when carrying SCBA. The effects of SCBA strap lengths were also evaluated. Methods: Kinematic parameters of twelve male subjects running in a control condition with no SCBA equipped and three varying-strapped SCBAs were measured using 3D inertial motion capture. Subsequently, motion data and predicted ground reaction force were inputted for subject-specific musculoskeletal modeling to estimate joint and muscle forces. Results: The knee was exposed to the highest internal force when carrying SCBA, followed by the rectus femoris and hip, while the shoulder had the lowest force compared to the no-SCBA condition. Our model also revealed that adjusting SCBA straps length was an efficient strategy to influence the force that occurred at the lumbar spine, hip, and knee regions. Grey relation analysis indicated that the deviation of the center of mass, step length, and knee flexion-extension angle could be used as the predictor of musculoskeletal disorders. Conclusion: The finding suggested that the training of the newly recruits focuses on the coordinated movement of muscle and joints in the lower limb. The strap lengths around 98-105 cm were also recommended. The findings are expected to provide injury interventions to enhance the occupational health and safety of the newly recruited firefighters.

• Composites Research
• /
• v.32 no.5
• /
• pp.279-283
• /
• 2019

A flight training simulator of a fully spherical configuration is being developed to precisely and quickly control six degrees of freedom (Dof) motions especially with unlimited rotations. The full-scale simulator should be designed with a lightweight material to reduce inertial effects for fast and stable feedback controls while no structural failure is ensured during operations. In this study, a sandwich composite consisting of glass fiber reinforced plastics and a foam core is used to obtain high specific strengths and specific stiffnesses. T-type stainless steel frames are inserted to minimize the deformation of the sphere curvature. Finite element analysis is carried out to evaluate structural safety of the simulator composed of the sandwich sphere and steel frames. The analysis considers the weights of the equipment and trainee and it is assumed to be 200 kg. Gravity acceleration is also considered. The stresses and displacement acting on the simulator are calculated and the safety is assessed under two different situations.

• Safety and Health at Work
• /
• v.11 no.4
• /
• pp.509-516
• /
• 2020

Background: Meta-analyses have shown firefighters to be at an increased risk of several cancer types. Occupational carcinogen exposure may explain these increased risks. This study aims to describe Norwegian fire departments' work conditions from 1950 until today, focusing on factors relevant for potential occupational carcinogen exposure. Methods: With the help of a reference group, we developed a questionnaire on topics related to occupational exposure to carcinogens for the period 1950-2018. Selected Norwegian fire departments provided department-specific responses. Results: Sixteen departments, providing fire services for 48% of the Norwegian population as of 2019 and mainly consisting of professional firefighters, responded to our questionnaire. The introduction of synthetic firefighting foams, more regular live fire training, the introduction of chemical diving, and a higher number of diesel-driven fire service vehicles were identified as changes thought to increase exposure to occupational carcinogens. Changes thought to decrease exposure included the switch from negative to positive pressure self-contained breathing apparatuses, the use of self-contained breathing apparatuses during all phases of firefighting, the use of ventilating fans during firefighting, increased attention to flammable materials used during live fire training, increased attention to handling and cleaning of turnout gear and other equipment, and installment of exhaust removal systems in apparatus bays. Conclusion: Norwegian fire departments' work conditions have seen several changes since 1950, and this could influence firefighters' occupational carcinogen exposure. A peak of carcinogen exposure may have occurred in the 1970s and 1980s before recent changes have reduced exposure.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.1
• /
• pp.83-92
• /
• 2003

Scheduling plays an important role in shop floor planning. A scheduling shows the planned time when processing of a specific job will start on each machine that the job requires. It also indicates when the job will be completed on every process. Thus, it is a timetable for both jobs and machines. There is only one server available and arriving work require services from this server. Job are processed by the machine one at a time. The most common objective is to sequence jobs on the severs so as to minimize the penalty for being late, commonly called tardiness penalty. Based on other objectives, many criteria may serve as s basis for developing job schedules. The process also comprises all strategic planning, capital investments, management decisions, and tasks necessary to create a new product. manufacturing processes must be created so that the product can be produced in the product facility. Purchasing new equipment and training workers may be required if new technology is to be used. Tools, fixtures, and the sequence of steps in the manufacturing processes must all be developed to allow rapid, high-quality, cost effective production. Also, it may be needed to be rearrange the production facility to adapt to the new manufacturing processes. Therefore, this study tries to proposed that Scheduling by customer needs group for minimizing the problem and reducing inventory, product development time, cycle time, and order lead time.

• Journal of Aerospace System Engineering
• /
• v.17 no.4
• /
• pp.34-42
• /
• 2023

This study aims to analyze safety reports received through the recently added SMS safety self-report in the Air Force's "integrated air control management" system, identify hazards, present improvements by region (base), and lay the foundation for future data-based safety management. To identify risk factors, it was first classified by base based on data classified into 16 groups in the autonomous reporting system, and second classified in detail based on the type and description. Risk factors were analyzed for the most reported control cooperation (306) items, and improvements were derived by dividing risk factors into information sharing, regulations, procedures, education, training, and equipment items based on the analysis results. It was confirmed that risk factors and specific improvements vary by base (12), which is important data that can present statistical analysis and the direction of safety management in the flight control field by base (region). In addition, since there is no data-based risk factor analysis study for each specific base (region), it can be used in the future as basic research data for data-oriented safety management.