• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.11a
• /
• pp.35-40
• /
• 2003

This paper presents a method for designing layout on the yard and evaluating alternative designs of the layout by applying simulation. The method is based on the concepts of the conventional port container terminal with a perpendicular yard layout. In general, yard design of the container terminal is consists of the two major parts. One is to divide yard area between the number of sections and the number of runs and the other is to decide the number of equipment that is the yard truck and yard crane. In the past days, this design was depended on the experience of the terminal operator and the structure of the conventional terminal layout because it is a very complex decision problem. In this paper we suggest the method of yard design as a conceptual procedure and estimate the efficiency of the container crane and the optimal the number of equipment using the simulation. Numerical examples are provided in order to illustrate the conceptual procedure. As the example, the suggested method and simulation are applied to the virtual container terminal with a perpendicular yard layout. In the results, the number of sections and runs on yard area, the number of yard truck per container crane and the number of yard crane per run are decided. In additional, the traffic among blocks on yard layout is estimated in terms of rate.

• Journal of Drive and Control
• /
• v.16 no.1
• /
• pp.14-21
• /
• 2019

Axial piston pump is a significant part in wheeled armored vehicle, for generating hydraulic power of vehicle power system. The Axial Piston Pump is a high-performer, core functional item that is developed and applied to most of the military models in the development of military weapon systems. However, in the case of military equipment, there are conditions of limited size and weight required depending on the operating conditions and the operating environment. Under these conditions, it is required that the performance and the environmental resistance are verified to exert the required output. A unique technology is needed for the development of such equipment both in the present and in the future. Therefore, in this study, mathematical modeling of an axial piston pump is presented as a basic data for securing proprietary technology. In addition, a simulation model is designed and compared with the models of six kinds of pistons through simulation. It was established that when the number of pistons of the axial piston pump, which is the development objective, is seven, the model is suitable for the wheeled armored vehicle.

• Journal of Applied Reliability
• /
• v.17 no.3
• /
• pp.246-255
• /
• 2017

Purpose: This study proposes the optimal PM (preventive maintenance) policy of leased equipment for lessee's decision-making using two types of reliability condition. Methods: We consider reliability threshold based PM model. Equipment reliability is estimated and used as condition variable. The effect of repair for maintenance is imperfect and represented by age reduction factor. Results: We provide two PM policies. Policy 1 is focused on minimized total cost. This policy guarantees reliability threshold until last maintenance action. Policy 2 focus on maintaining reliability threshold during leased period. The proposed approach provides optimal reliability threshold under number of PM. Through result, we finally construct decision-making process for lessee using reliability threshold and end of reliability. Conclusion: This study provides two PM policy for lessee's decision-making. Through numerical example, we get a result of optimal reliability threshold, number of PM, optimum alternative under lessee's reliability condition.

• The Journal of Economics, Marketing and Management
• /
• v.10 no.3
• /
• pp.1-8
• /
• 2022

Purpose: This study aims to examine the effect of SMEs' R&D competence on management performance. Research design, data, and methodology: The empirical data of this study are derived from 2,375 SMEs that participated in the material, parts, and equipment research and development support project conducted from 2014 to 2018. Among them, 2,230 data were analyzed by classifying them into high-tech and low-tech fields. SPSS 24.0 was used for statistical analysis and correlation analysis and T-TEST were applied. Results: It was analyzed that the level of R&D organization, research personnel, and the number of patent registrations all affected operating profit and sales. In particular, it has been proven that research personnel have a greater impact on management performance among the level of R&D organization, research personnel, and the number of patent registrations. In addition, there was a difference between high-tech and low-tech industries in the impact on operating profit and sales, which are indicators of management performance. Conclusions: This study suggests that R&D competence are strengthened to advance the material, parts, and equipment industries and to promote future growth, while differentiated support is needed according to each company's R&D competence and technology level.

• Journal of Fisheries and Marine Sciences Education
• /
• v.22 no.4
• /
• pp.516-528
• /
• 2010

The Korean marine equipment industry is, in significant ways, behind the shipbuilding industry. For example, in terms of the number of orders received, the shipbuilding industry has ranked first in the world since 2003. In contrast, the global competitiveness of Korea's marine equipment industry is still relatively weak. This is important not only for the equipment industry, but because these two industries have many links. The structure of this research was firstly, to identify theoretical issues by looking at the characteristics of the marine equipment companies, marketing recognition, uses of marketing, and financial outcomes. Second, the study developed an analytical framework for empirical examination using configuration of each factor. Third, each factor has been analysed empirically. Forth, this study presents the importance of marketing for marine equipment companies within Korea, as well as in a global market. Finally, the study suggests a new marketing strategy for Korea's marine equipment companies to achieve global competitiveness.

• Journal of the Korean housing association
• /
• v.12 no.4
• /
• pp.105-113
• /
• 2001

This research indicates to controversial point that store equipments were not applying correct development factor in the each apartment house by that change rate by scale and uniformity of form and inefficiency, effect of discount store is increasing in apartment house and progressed research. The result are as follows; First, interior main point of store of that influence greatly to change rate number of store be. Second, being lot area in jar in outside factor of store. Third, discount store separation appeared by leading person who influence greatly to change rate in middle who is contiguity market singleness residential quarter and contiguity existence of commercial district and nonexistence and discount store separation of only outside right near at hand. Construction of commerce equipment may have to consist in practical apartment house after examine various kinds factor such as store indoor, store outside and only outside while plan practical use of systematic and efficient commerce equipment focusing more in efficient utilization of commerce institution that consist after plan that is not planed commerce equipment focusing in development in plan of commerce equipment in apartment house hereafter accordingly.

• Journal of the Korean housing association
• /
• v.9 no.2
• /
• pp.67-78
• /
• 1998

Construction equipment noise has caused much annoyance for a number of dwellers in nearby construction field and it has become a very serious issue in our living environment. Therefore, in our country, a practical solution and a better method of reducing construction equipment noise are highly required in construction field. Practical solutions for the construction equipment noise, however, are very difficult to obtain, because of the lack of basic data and insufficient research works. Especially, in order to establish a successful sound isolation plan for piling work noise, which has high sound pressure level, the characteristics of the impact noise should be closely monitored and analyzed. This study attempts to survey the characteristics of attenuation and propagation of construction equipment noise in piling work by SIP(soilcement injected precast pile) method. In addition, this study intends to get the basic data to establish a standard about construction noise.

• Journal of Korea Multimedia Society
• /
• v.24 no.1
• /
• pp.134-145
• /
• 2021

The purpose of this study is to explore the acceptance intent of groups of experts and users for converged medical equipment using NeuroTech. This healthcare equipment is applied with technology that simultaneously enhances body function and cognitive function. Interviews were conducted with groups of experts and users to investigate the acceptance of equipment. The interviews include health problems for the elderly, the need to develop medical equipment, and the effectiveness. After recording the collected historical data, we performed the data analysis in accordance with the procedures of the phenomenological analysis method. The total number of people interviewed was 27, 16 experts and 11 users. As a result of the interview, we derived seven topic groups for each of the 12 topic groups and user groups. The implications were derived based on the results.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.662-663
• /
• 2015

Despite the improvement of productivity and cost, the operating of such equipments yet has been recognized as a 3D business which is a low wage and poor working environment business field. Accordingly, the number of such operators has been decreasing by time. Especially, construction equipment demands higher controlling skills and occasionally involved in critical accidents. Therefore, this study aims to suggest a conceptual design for an construction equipment Around View Monitoring system that visually assists the operator for more efficient operating. It is expected that the application of such technology for a construction equipment highly improves the productivity and work quality, moreover, prevents disastrous accidents that occur to labors.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.1 s.56
• /
• pp.195-207
• /
• 1997

High price equipment is one of the major factors that increases national health expenditure in developed countries. Computerized Tomography(CT), one of the important high price equipment, has been concerns of health service researchers and policy makers in many countries. In Korea, CT, first introduced in 1984, have spreaded nationwide with rapid speed. Though the Committee for Approving Import of High Price Medical Equipment, founded in 1981, tried to regulate the introduction of high price medical equipment including CT, the effort resulted in failure. The exact situation of diffusion of the high price equipment, however, was not yet investigated. We aimed at the description of the diffusion of CT in Korea and analysis of influencing factors on hospitals for the adoption of CT. We mainly used the database of CT, made in 1996 by the National Federation of Medical Insurance for the purpose of insurance payment for CT. Also characteristics of hospitals were gathered from yearbooks published by the central and local governments and by the Korean Hospital Association. We calculated the cumulative number of the CT per one million population year by year. In turn, multiple linear logistic regression was done to find out the contributing factors for the adoption of CT by each hospital. In the logistic regression model, it is regarded as dependent factor whether a hospital retained CT or not in 1988 and 1993. The major categories of the independent factors were hospital characteristics, environmental factors and competitive conditions of hospitals at the period of the adoption. The results are as follows: Number of CT scanners per one million persons in Korea marked more higher level compared with those of most OECD countries. Major influencing factors on the adoption of CT scanners were hospital characteristics, such as hospital referral level, and competitive condition of hospitals, such as number of CT scanners per 10,000 persons in each district where the hospital was located. In Korea, CT diffused with rather rapid speed, comparable with those of the United States and Japan. The major factors contributing on the adoption of CT for hospitals were competitive condition and hospital characteristics rather than regional health care need for CT. In conclusion, a kind of regulating mechanism would be necessary for the prevention of the indiscreet adoption and inefficient use of high price equipment including CT.