• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.5
• /
• pp.587-596
• /
• 2016

This study attempts to draw factors for an analysis of the operation effect of a rechlorination facility and autodrain equipment for residual chlorine equalization by installing and operating a rechlorination facility and autodrain equipment in P City and analyzing the practical evaluation method and operation effect. For this purpose, this study selected three indicators for an analysis of the effectiveness of residual chlorine equalization and conducted a comparative analysis before and after the implementation of the residual chlorine equalization. As a result of estimation, (1) the reduction of the residual chlorine concentration range from a water treatment plant to the pipe end was 16.0%; (2) the total reduction of chlorination input was 18.0%; and (3) the reduction of the generation of disinfection by-products was 19.5%. In addition, this achieved enough residual chlorine equalization in the supply process and shows that it could successfully achieve the economic feasibility of investment in equipment and the reduction of the generation of disinfection by-products. Like this, it is judged that the three indicators suggested in this study will be used sufficiently as indicators of an analysis of the effectiveness of residual chlorine equalization according to the operations of the rechlorination facility and autodrain equipment.

• Journal of the Society of Disaster Information
• /
• v.8 no.1
• /
• pp.56-70
• /
• 2012

Civil defense evacuation facilities currently installed in our country are necessary to survey the operating status. The purpose of this study is to survey on the current facility for civil defense evacuation facilities equipment, management, and problem analysis, research and to build a facility model of the standard formulation through the analysis on the actual condition of the civil defense evacuation facility. The conclusions of this study are as follows. First, the civil defense evacuation facilities are most in Seoul. Second, civil defense evacuation facilities proved to be checked periodically without a systematic management. Many facilities do not have communication facilities appear to be evacuated in an emergency situation is expected to have difficulty in contact with the outside world. Fourth, the old civil defense evacuation facilities are in the center of the metropolitan area.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.79-90
• /
• 1995

The material handling equipment selection, that is a key task in the material handling system design, is a complex, difficult task, and requires a massive technical knowledge and systematic analysis. It is invaluable to justify the selected equipment model by the performance evaluation before its actual implementation. This paper presents an intelligent knowledge-based expert system called "IMESE" created by authors, for the selection and evaluation of material handling equipment model suitable for movement and storage of materials in a manufacturing facility. The IMESE is consisted of four modules: a knowledge base to select an appropriate equipment type, a multiple criteria decision making procedure to choose the most favorable commercial model of the selected equipment type, a database to store the list of commercial models of equipment types with their specifications, and simulators to evaluate the performance of the equipment model. The whole process of IMESE is executed under VP-Expert expert system environment.vironment.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.4
• /
• pp.216-224
• /
• 2013

Facility data is created throughout the design and construction phase. But the most facility managers bear significant costs that arise from the lack of interoperability with facility lifecycle. This paper is concerned with the way to collect facility data using BIM technology. The aim of this paper is to suggest BIM data modeling guide for the facility management using the information that need to be delivered from design and construction phase to operation and management phase. The BIM data modeling guide focus on the properties of mechanical equipment. It is to be hoped that this study will contribute to collect facility data from as-built BIM data and to build facility management system database without difficulty.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.573-576
• /
• 2004

KARI is achieving the KSLV program according to National Space Technology Development Program. In this paper, the authors are intended to introduce the Integrated Power Plant (abb. IPP) test facility which will be constructed for the variety of tests on KSLV program. IPP test facility refers to comprehensive testing equipment for liquid rocket launch vehicle. Using this facility, KARl can verify the adaptiveness of parts and subsystems for launch vehicle and finally can qualify the system characteristics of launch vehicle doing kinds of test including hot firing test. Using this facility, KARI can simulate the vehicle launching circumstances and it make to predict the performance of launch vehicle when its flight test.

• KIEAE Journal
• /
• v.14 no.2
• /
• pp.37-46
• /
• 2014

University buildings are energy-guzzling facility that consume more than 10,000TOE within a campus annually. Even the consumption is on an upswing trend. Behind such high consumption are there cheap power rates for education facility, lack of high-efficiency equipment and ever-increasing use of various information equipment. Being keenly aware that greenhouse gas emission increases due to such rise of energy consumption, the present study carried out a case study. In the case study, the study chose the buildings of E university from top 10 universities that consume energy most in Seoul and examined the current status of their energy consumption and greenhouse gas emission. And then it set the reduction target of greenhouse gas by year. Putting aside a middle and long-termed strategy for later endeavor, it first established the 1st year's implementation plan (2014) for energy saving and greenhouse gas reduction with limited budget and according to greenhouse gas reduction target. The plan is specified as follows. Targets for energy saving are mainly divided into two sectors: machine equipment and electric equipment. 7 ideas were proposed. Three ideas to improve machine equipment are to replace with high-efficiency boilers and chillers and to adjust the position of the cooling tower. By doing so, it was estimated that energy could be saved by 176.34TOE in total and greenhouse gas could be reduced by 370.771t$CO_2$-eq. Four ideas to improve electric equipment include the replacement with LED lights, LED emergency lights and high-efficiency motors and the installation of motion sensors. It was calculated that such replacement could conserve 1,076.08TOE (electric energy) and reduce 2,181.420t$CO_2$-eq (greenhouse gas).

• Korean Journal of Community Nutrition
• /
• v.13 no.4
• /
• pp.520-530
• /
• 2008

The purpose of this study was to investigate the characteristics of the foodservice management practices, the equipment ratio of sanitary facility/equipment, and dietitians' perceptions of (i) the barriers to sanitary management and (ii) the sanitary management performance level in the welfare institutions for the disabled in Korea. The survey was conducted during the period from September 7 to October 15, 2006. A total of 91 institutions(response rate 74.6%) were analyzed by using SPSS(windows ver. 14.0). The average number of meals served per day per an institution was 379. The majority(93.4%) of dietitians made decisions in procurement. The major part of the purchase was made through private contract. The factors affecting menu planning were nutrition, food preference, and cost, in the order of importance. Among the food items, fruits were infrequently served, while protein source foods and green leaf vegetables were almost daily served. The equipment ratio of sanitary facilities/equipment was 45%, which was relatively low. Most dietitians perceived 'limited availability of facilities and equipment' and 'the lack of support from financing department' as the major barriers in implementing a desirable sanitary system. Sanitary management performance in 'the food ingredient' was perceived as the lowest, while that in 'the uniform' showed the highest. The results of this study suggest that a proper supporting program on securing the facility/equipment and adequately trained employees are needed for successful sanitary management. Also, a more frequent supply of fruits for the disabled is recommended.

• Journal of Korean society of Dental Hygiene
• /
• v.22 no.1
• /
• pp.63-72
• /
• 2022

Objectives: This study was conducted to prepare basic data to propose the necessity and utilization of oral welfare products in the welfare services of the long-term care insurance system, focusing on facility workers working in elderly facilities. Methods: The analysis was conducted on 144 workers working at some local elderly facilities. The questionnaire was constructed by classifying the use of oral welfare tools into 6 questions and the necessity and demand for oral welfare devices into 13 questions. Frequency analysis and technical analysis were performed for data analysis, and one-way ANOVA was performed for differences in the necessity and demand for oral welfare equipment. The statistical significance level was p<0.05. Results: As a result of examining the awareness of the necessity and demand for oral welfare equipment among workers in elderly facilities, the awareness of the necessity of including oral welfare equipment in the items of welfare equipment in the current long-term care insurance system was high at 4.15 points. As a result of analyzing the correlation between awareness of care products and the need and demand for oral welfare equipment, it was confirmed that there was a statistically significant positive correlation (p<0.01). Conclusions: In the long-term care insurance system for the elderly, oral welfare products need to be considered for welfare equipment services. The provision of oral welfare products within the long-term care insurance system for the elderly can provide opportunities and services to select various self-care tools. In addition, it is expected that it will be possible to promote changes in the long-term care insurance system for the elderly and to improve the system in a variety of positive ways.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.188-191
• /
• 2002

This paper concerns 3-D graphical modeling and simulation techniques for design and control of automated equipment for construction and facility maintenance. A case study on the use of 3-D graphics techniques for developing a power plant maintenance robot is presented. By simulating equipment operation within the 3-D geometry models of the work environment the environment design was improved. The 3-D graphical models of the equipment and the work environment were further utilized for the control of the robot from a remote distance. By presenting the real-time updated equipment configuration and the work environment to the operator, the graphical model-based equipment control system helped the operator overcome the problems associated with spatial perception. The collision between the robot and the plant structures was also avoided based the real-time analysis of the dynamically updated graphical models.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.16-17
• /
• 2020

The Temporary construction refers to the construction or dismantling of temporary structures installed for the construction of the main structure at the construction site, and the members constituting this temporary facility are called temporary equipment. Temporary equipment used in construction sites is mostly used products that are reused rather than new products, and it is necessary to consider performance degradation due to repeated use. This study is a preliminary study to develop the performance evaluation criteria applied to temporary equipment that is distributed and reused for secondhand. This study is to analyze the performance status of temporary equipment of used goods owned by rental companies by condition grade through performance tests.