• Journal of the Korean Chemical Society
• /
• v.28 no.2
• /
• pp.121-129
• /
• 1984

The adsorption characteristics of heavy metal ions $(Ni^{2+}$, $Zn^{2+}$) on domestic activated carbon which manufactured from the wood, waste rubber and coal has been studied. The following conclusions were obtained by investigating the effect of pH, halides, cyanide and temperature on the absorption of heavy metal ions and by determining absorption rate and absorption isotherms. When heavy metal ions were adsorbed on activated carbon in the pH range from 6 to 7, treated heavy metal ions were almost come to the equilibrium and recovered in the form of complex anions such as $MX_4^{2- }$and $M(CN)_4^{2-}$ in an hour. The absorption isotherms of heavy matel ions were well fitted in Freundlich's equation. Heavy metal complex anions on activated carbon were easily eluted by using 0.1N HCl solution. These results suggest that the complex anions have unexpectedly strong affinity for the surface of activated carbon.

• Journal of the Korean Chemical Society
• /
• v.11 no.3
• /
• pp.100-104
• /
• 1967

The systems of aromatic amines such as aniline, N,N-dimethylaniline and N,N-diethylaniline with iodine or iodine monochloride in carbon tetrachloride have been examined spectrophotometrically. The results indicate the formation of one to one molecular complexes. The equilibrium constants obtained at room temperature for formation of the complexes are as follows: $C_6H_5NH_2{\cdot}I_2\;2.05$, $C_6H_5N(CH_3)_2{\cdot}I_2\;15.2$, $C_6H_5N(C_2H_5)_2{\cdot}I_2\;35.5$, $C_6H_5NH_2{\cdot}ICl\;18.5$, $C_6H_5N(CH_3)_2{\cdot}ICl\;25.6$, and $C_6H_5N(C_2H_5)_2\;42.0$ l $mole^{-1}$.

• Journal of the Korean Chemical Society
• /
• v.11 no.3
• /
• pp.89-93
• /
• 1967

The interactions of fluorobenzene with iodine monochloride, iodine monobromide, bromine and chlorine in carbon tetrachloride solution have been examined through ultraviolet spectrophotometric measurements. The results indicate the formation of one to one molecular complexes, $C_6H_5F{\cdot}ICl$, $C_6H_5F{\cdot}IBr$, $C_6H_5F{\cdot}Br_2$, and $C_6H_5F{\cdot}Cl_2$ in solution. The equilibrium constants obtained at room temperature for the formation of these four complexes are 0.161, 0.072, 0.045 and 0.035 l $mole^{-1}$, respectively. Comparison of these results with those reported in the literature on other complexes of similar type reveals that the relative stabilities of these complexes decrease in the following orders: ICl>IBr>$I_2$>$Br_2$>$Cl_2$ $C_6H_6$>$C_6H_5Br$>$C_6H_5Cl$>$C_6H_5F$

• Journal of the Korean Chemical Society
• /
• v.11 no.3
• /
• pp.94-99
• /
• 1967

The interactions of iodobenzene with iodine, iodine monobromide, iodine monochloride and chlorine in carbon tetrachloride solution have been investigated by means of ultraviolet spectrophotometric measurements. The results reveal the formation of one to one molecular complexes, $C_6H_5I{\cdot}I_2$, $C_6H_5I{\cdot}IBr$, $C_6H_5I{\cdot}ICl$, and $C_6H_5I{\cdot}Cl_2$, in solution. The equilibrium constants obtained at room temperature (about $21^{\circ}C$) for the formation of these four complexes are 0.23, 0.73, 1.2 and 0.070 l $mole^{-1}$, respectively. Comparison of these results with those reported in the literature on other complexes of similar type indicates that the relative stabilities of these complexes decrease in the following orders: ICl>IBr>$I_2$>$Br_2$>$Cl_2$ $C_6H_5I$>$C_6H_6$>$C_6H_5Br$>$C_6H_5Cl$>$C_6H_5F$.

• Journal of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.80-85
• /
• 1980

The free radical copolymeriaztion of N-vinylurea(VU) with vinyl acetate (VAc) was carried out at $60^{\circ}C$ in three solvents. VU-vinyl alcohol(VA) copolymers were prepared by the methanolysis of the VU-VAc copolymers. From the nitrogen content measurements of VU-VA copolymers, the monomer reactivity ratios for the VU-VAc copolymerization and the values of Alfrey-Price's Q and e for VU were determined. These Q and $\varrho$ values obtained in the cases of using methanol and methanol-dioxane as the polymerization solvents are comparable with those found for other monomers which have > NCO-pendent groups. The $\varrho$ value indicates that the urea group of VU is a electron-donating group. The copolymerization parameter of VU shows a strong effect of the solvents. These results are interpreted to be that VU is in equilibrium with its tautomer at the polymerization temperature.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.798-802
• /
• 1998

Carbon granules were prepared by granulating a mixture of coconut shell powder and coal tar solution, and then by carbonizing at different temperatures. To control micropores of the carbonized granules, the deposition time of benzene vapor under nitrogen atmosphere was varied. For each prepared sample, SEM morphology and true density were investigated. The adsorption rates on the granules were measured with respect to oxygen and nitrogen by means of the Cahn D-200 system. Diffusivity, selectivity and amount of equilibrium adsorption for the gases were obtained from the measurement of adsorption rate. Based on the analysis of the adsorption characteristics, the optimum temperature and the deposition time for preparation of the molecular sieve carbon granules were found to be $800^{\circ}C$ and 10 minutes, respectively. At these optimal conditions, the selectivity coefficient, 26.4, 0f oxygen and nitrogen was obtained.

• Clean Technology
• /
• v.21 no.2
• /
• pp.124-129
• /
• 2015

The constant-volume method was used to determine the solubility of CO₂ in various physical absorbents such as DMPEG (dimethyl ether of polyethylene glycol), DEC (diethyl carbonate), DMC (dimethyl carbonate), and TAT (triacetin) in the total pressure range from 5 to 30 bar. The Peng-Robinson equation of state has been used to describe the equilibrium behavior of these mixtures. It was found that the solubility of absorbents was in the of DMPEG250 > TAT > DEC > DMC at the same temperature. Futhermore, the solubiity of blended absorbent of DMPEG250 and DEC is higher than that of DMPEG 250 alone. Therefore, blended absorbent of DMPEG250 and DEC is expected to be an effective and low cost absorbent for physical absorption in precombustion CO₂ capture.

• Applied Biological Chemistry
• /
• v.47 no.1
• /
• pp.33-40
• /
• 2004

Thermodynamic properties of ubiquitin transient folding intermediate were studied by measuring folding kinetics in varying temperatures and denaturant concentrations. Through quantitative kinetic modeling, the equilibrium constant, hence folding free energy, between unfolded state and intermediate state in several different temperatures were calculated. Using these values, the thermodynamic parameters were estimated. The heat capacity change $({\Delta}C_p)$ upon formation of folding intermediate from unfolded state were estimated to be around 80% of the overall folding reaction, indicating that ubiquitin folding intermediate is highly compact. At room temperature, the changes of enthalpy and entropy upon formation of the intermediate state were observed to be positive. The positive enthalpy change suggests that the breaking up of the highly ordered solvent structure surrounding hydrophobic side-chain upon formation of intermediate state. This positive enthalpy was compensated for by the positive entropy change of whole system so that formation of transient intermediate has negative free energy.

• Economic and Environmental Geology
• /
• v.28 no.1
• /
• pp.9-17
• /
• 1995

The Kamkye Cu-Pb-Zn-Au-Ag deposits occur as quartz veins that filled fault-related fractures of NW system developed in the Cretaceous Gyeongsang basin. Three major stages of mineral deposition are recognized: (1) the stage I associated with wall rock alteration, such as sericite, chlorite, epidote and pyrite, (2) the early stage II of base-metal mineralization such as pyrite, hematite, and small amounts of sphalerite and chalcopyrite. and the middle to late stage II of Cu-As-Sb-Au-Ag-S mineralization, such as sphalerite, chalcopyrite, galena with tetrahedrite, tennantite, pearceite, Pb-Bi-Cu-S system, argentite and electrum. (3) the stage III of supergene mineralization, such as covellite, chalcocite and malachite. K-Ar dating of alteration sericite is a late Cretaceous ($74.0{\pm}1.6Ma$) and it may be associated with granitic activity of nearby biotite granite and quartz porphyry. Fluid inclusion data suggest a complex history of boiling, cooling and dilution of ore fluids. Stage II mineralization occurred at temperatures between 370 to $220^{\circ}C$ from fluids with salinities of 8.4 to 0.9 wt.% NaCl. Early stage II($320^{\circ}C$, 2.0 wt.% NaCl) may be boiled due to repeated fracturing which opened up the hydrothermal system to the land surface, and which resulted in a base-metal sulfide. Whilst the fractures were opened to the surface, mixing of middle-late stage II ore fluids with meteoric waters resulted in deposition of Cu-As-Sb-Au-Ag minerals from low temperature fluids(${\leq}290^{\circ}C$). Boiling of ore fluids may be occured at a pressure of 112 bar and a depth of 412 m. Equilibrium thermodynamic interpretation of sphalerite-tetraherite assemblages in middle stage II indicates that the ore-forming fluid had log fugacities of $S_2$ of -6.6~-9.4 atm.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.825-835
• /
• 1994

Synthesis of ETBE as an octane number enhancer from ethanol and isobutene in a flow reactor under atmospheric pressure was studied. Amberlyst-15 and Amberlyst XN-1010 were used as catalysts within the temperature range of $70-140^{\circ}C$. The activity of Amberlyst 15 was higher than that of Amberlyst XN-1010. The reaction rate data obtained under differential reactor condition were tested by a linear regression method to determine the reaction mechanism and kinetic parameters. The ETBE synthesis reaction seems to be proceeded via the LHHW(Langmuir-Hinshelwood-Hougen-Watson) machanism. The activation energy of the surface reaction was estimated by the reaction rate constants as well as the adsorption equilibrium constants. Apparent activation energies are 18.64 and 24.19kcal/mol for Amberlyst-15 and Amberlyst XN-1010, respectively.