• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.14 no.1
• /
• pp.15-23
• /
• 2008

Purpose : To evaluate the effects of elastic resistance exercise of lumbo-pelvic region and upper limbs muscle on equilibrium ability and shoulder pain of the elderly. Methods : The subject consisted of sixteen healthy elderly people(14 females. 2 males). They were from 61 to 83 years old and the mean age was 68.06. All subjects were assigned only the elastic resistance exercise group. The subject group received elastic resistance exercise for about 60 minutes per day, two times per weeks, during 8 weeks period. A Stop watch was used to measure static equilibrium ability and dynamic equilibrium ability and then pressure algometer was used to measure shoulder press pain threshold. All measurements of each subjects were measured at pre-experiment and post-experiment stage. SPSS 12.0 program was used to compile results. A Paired samples t-test was conducted to examine changes of static equilibrium, dynamic equilibrium and shoulder press pain threshold between pre-experiment and post-experiment. Results : The static equilibrium ability, dynamic equilibrium ability and shoulder press pain threshold were significantly differences between pre-experiment and post-experiment(p<.05). Conclusion : This data suggests that an eight week elastic resistance exercise improved static equilibrium ability and dynamic equilibrium ability and then reduced shoulder pain.

• Transactions of Materials Processing
• /
• v.7 no.6
• /
• pp.594-602
• /
• 1998

The design analysis of axisymmetric, multi-stage deep drawing dies was performed using the rigid-viscoplastic finite element formulation. In the formulation the axisymmetric CFS algorithm was employed. Hill's non-quadratic normal anisotropic yield criterion and isotropic hardening rule were considered. For trial initial displacements and tool contact points. the geometric force equilibrium method was adopted. In order to see the validity of the formulation, the multi-stage deep drawing processes of shell-cylinder front part of hydraulic booster were simulated. The simulation showed good agreements with measurments and PAM-STAMP results.

• Korea Trade Review
• /
• v.41 no.2
• /
• pp.29-60
• /
• 2016

Research and Development(R&D) investment is an issue of central importance in any economy. In this paper we analyze the relationship between R&D spillovers and trade-related variables, using a two-stage model where duopolists simultaneously decide on R&D in the first stage and engage in Cournot competition in the second stage. We characterized and compared the free-trade and trade-restriction R&D equilibrium in a two-stage game of R&D investment followed by Cournot market competition. We also assessed the impact of varying the R&D spillover on the equilibrium outcomes and tariff. We showed for both free trade and protection cases that there exists a unique symmetric solution(subgame perfect Nash equilibrium). As the solution, while analytical, cannot be stated in closed form, we resorted to numerical experiments to investigate the equilibrium results. Our estimates indicate for both free trade and protection cases that the level of R&D investment and the rate of R&D expenditure decrease as the degree of R&D spillovers increases, and that there is an inverse relation between the degree of R&D spillovers and level of protection. The latter implies that the larger the degree of R&D spillovers, the lesser the level of protection.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.6
• /
• pp.792-801
• /
• 2000

The problem of phase change from liquid to solid in the inviscid plane-stagnation flow is theoretically investigated. The solution at the initial stage of freezing is obtained by expanding it in powers of time, and the final equilibrium state is determined from the steady-state governing equations. The transient solution is dependent on the three dimensionless parameters, but the equilibrium state is determined by one parameter of (temperature ratio/conductivity ratio). The effect of the fluid flow on the growth rate of the solid in the pure conduction problem can be clearly seen from the solution of the initial stage and the final equilibrium state. The characteristics of the transient heat transfer at the surface of the solid and the liquid side of the solid-liquid interface for all the dimensionless parameters are elucidated.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.1
• /
• pp.1-11
• /
• 2000

This study investigates the problem of phase change from liquid to solid in the inviscid stagnation flow. The solution of dimensionless governing equations is determined by the three dimensionless parameters of (temperature ratio/conductivity ratio), Stefan number, and diffusi-vity ratio. The solution at the initial stage of freezing is obtained by expanding it in powers of time, and the final equilibrium state is determined from the steady-state governing equations. The equilibrium state is dependent on (temperature ratio/conductivity ratio), but is independent of Stefan number and diffusivity ratio. The effect of fluid flow on the pure conduction problem can be clearly seen from the solution of the initial stage and the final equilibrium state, and the characteristics of the solidification process for all the dimensionless parameters are elucidated.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.s02
• /
• pp.96-114
• /
• 1989

There are several meterorolgical stresses in the winter cereal crops. Among these stresses, cold injury is one of the most important stresses for wheat and barley production in Korea. The reduction in grain yield of the wheat and barley due to cold injury has occurred almost every year in Korea. The objective of the study was to get the basic information in relation to the cold injury and to detect the method minimizing the damage of cold injury. When the air temperature was the ranges of -13$^{\circ}C$ to -15$^{\circ}C$, the soil temperature at the crown part of the plant was very stable, whereas in the ranges of -2$^{\circ}C$ to -3$^{\circ}C$ the soil surface temperature was more unstable and cold than air and subterranean temperatures. The different parts of the plant in wheat and barley possess the different levels of cold hardiness. In comparison to the cold hardiness of plant parts, the leaf and crown are the less sensitive to cold injury than root and vascular transitional zone. The type and extent of stress is determined by the redistribution pattern of water during freezing. These types from freezing processes were three types: a) Equilibrium freezing pattern b) Non -equilibrium freezing pattern, c) Non-equilibrium freezing pattern typical of tender tissues. Cold hardiness in wheat plants were more harder than barley plants at vegitative stage, but inverted at the reproductive stage. Injuries by low temperature during the seasons of barley cultivation in Korea were occured mainly in four stage; in the first and third stage, frost injury occurs, the second stage, freezing injury, and the fourth stage, chilling injury.

• Journal of Environmental Policy
• /
• v.8 no.4
• /
• pp.75-94
• /
• 2009

The process of obtaining third-party financing contacts was analyzed via a two-stage game model: a "signaling game" for the first stage,and a "principal-agent model" for the second stage. The two-stage game was solved by a process of backward induction. In the second stage game, the optimal effort level of the energy saving company (ESCO), the optimal compensation scheme of the energy user, and the optimal payoffs for both parties were derived for each subgame. The optimal solutions forthe different subgames were then compared with each other. Our main finding was that if there is some restriction on ESCO's revenue (e.g. a progressive sales tax) that causes ESCO's revenue toincrease at a decreasing rate, then the optimal sharing ratio is uniquely determined at a level of strictly less than one under a linear compensation scheme, i.e. a unique balance exists. Subgames have a unique equilibrium arrived at separately for each situation,. Within this equilibrium, energy users accept energy audit proposals from H-type ESCOs with high levels of technology, but reject proposals from L-type ESCOs with low levels of technology. While L-type ESCOs cannot attain profits in the third-party financing market, H-type ESCOS can pocket the price differential between L-type and H-type audit fees. Accordingly, revenues in an H-type ESCO equilibrium increase not only in line with the technology of the ESCO inquestion, but also faster than in an L-type equilibrium due to more advanced technology. At the same time, energy users receive some positive payoff by allowing ESCOs to perform third-party financing tasks within their existing energy system without incurring any extra costs.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.24 no.1
• /
• pp.13-25
• /
• 1999

This paper presents a model of competitive positioning and pricing of new products in a multi-segmented market. The segments in the market are located on a multi-dimensional discrete attribute space with fixed demands. Firms launch products sequentially on the attribute space, incurring fixed and variable costs, and then decide on their product prices. Each firm acts to maximize its profit. Market share of a firm is determined by the position and price of Its product. We provide sufficient conditions for the existence and uniqueness of Nash equilibrium Another equilibrium concept is Introduced and related to the Nash equilibrium. A heuristic algorithm based on genetic algorithms is designed to obtain the Nash equilibrium.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.892-901
• /
• 2018

Because of excellent electrical properties, epoxy resin is widely used in packaging and casting power equipment. Moisture and temperature in the environment are inclined to seriously affect the insulation tolerance of epoxy resin. This work focuses on the aging characteristics of epoxy resin in hygrothermal environment. Scanning electron microscopy images show that there are micro-crack, micro-slit and holes inside aged samples. The moisture absorption process undergoes three equilibrium stages and it does not follow the Fick's second law. Observing the change of hydrogen bonds in the infrared spectra of the dried samples, it is found that chemically moisture absorption immerges when the physical moisture absorption entered the third equilibrium stage. By Debye equation to fit the imaginary part of the dielectric constant, it is concluded that the uniformity of water molecule has a great influence on the electrical conductivity loss. Furthermore, the polarization loss can be more easily affected by water molecules than small free molecules. After the aged samples being dried, their real and imaginary part of the dielectric constant descend, but their original electrical properties cannot completely restored. After chemical moisture absorption appears inside the material, the residual space charges increase significantly and the charge dissipation rate slow down obviously.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.06a
• /
• pp.65-73
• /
• 1998

The design analysis of axisymmetric, multi-stage deep drawing dies was performed using the rigid-viscoplastic finite element formulation. In the formulation, the axisymmetric CFS algorithm was employed. Hill's non-quadratic normal anisotropic yield criterion and isotropic hardening rule were considered. For trial initial displacements and tool contact points, the geometric force equilibrium method was adopted. In order to see the validity of the formulation, the multi-stage deep drawing processes of shell-cylinder front part of hydraulic booster were simulated. The simulation showed good agreements with measurements and PAM-STAMP.