• 제목/요약/키워드: Equilibrium reaction

검색결과 580건 처리시간 0.025초

Solvent Extraction of Zinc from Strong Hydrochloric Acid Solution with Alamine336

  • Lee, Man-Seung;Nam, Sang-Ho
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권7호
    • /
    • pp.1526-1530
    • /
    • 2009
  • Solvent extraction reaction of Zn(II) by Alamine336 from strong HCl solution up to 10 M was identified by analyzing the data reported in the literature. The equilibrium constant of this reaction was estimated by considering the complex formation between zinc and chloride ion. The necessary thermodynamic parameters, such as equilibrium constant for the formation of complexes and the interaction parameters, were evaluated from the thermodynamic data reported in the literature. The following solvent extraction reaction and the equilibrium constant was obtained by considering the activity coefficients of solutes present in the aqueous phase with Bromley equation. $Zn^{2+}\;2Cl^{-}\;+\;R_3NHCl_{org}\;=\;ZnCl_3R_3NH_{org},\;K_{ex}\;=\;6.33\;{\times}\;10^2$ There was a good agreement between measured and calculated distribution coefficients of Zn(II).

폴리(비닐 아세테이트)의 산촉매 가수분해 반응 (Acid-Catalyzed Hydrolysis Reaction of Poly(vinyl acetate))

  • 박상수;윤희숙
    • 폴리머
    • /
    • 제29권3호
    • /
    • pp.304-307
    • /
    • 2005
  • 산을 촉매로 한 물/초산용액에서의 폴리(비닐 아세테이트) 가수분해반응을 $35^{circ}C$에서, 물과 초산치 비율을 달리한 두 용액 조성에서 연구하였다. 반응시간에 따른 비닐 아세테이트(VAc)와 비닐 알코올(VA) 단량체 몰분율을 NMR로 측정하였고, 반응이 평형에 도달한 후의 화학평형상수($K_{eq}$)를 화학평형상태에서의 VAc와 VA의 몰분율을 이용하여 결정하였다. 화학평형에서의 VAc 몰분율이 0.78(${\pm}0.01$)이었을 때 $K_{ef}$는 0.76(${\pm}0.01$)이었고, VAc 몰분율이 0.57(${\pm}0.02$)일 때 0.69($\{pm}0.01$)이었다. 가수분해반응은 가성 1차 반응을 따랐으며, 반응속도상수는 $3.4{\times}10^{-6}/sec$이었다.

만성 요통환자와 정상인의 균형반응 비교 (Comparison of the Balance Relations Between Healthy Subjects and Patients With Chronic Low Back Pain)

  • 양회송;이강우
    • 한국전문물리치료학회지
    • /
    • 제9권2호
    • /
    • pp.1-17
    • /
    • 2002
  • The purpose of this study was to identify the differences of the static and the dynamic balance reactions in the flexion syndrome (FS) and the extension syndrome (ES) group of the patients with chronic lowback pain (LBP) and healthy subjects. Twenty subjects were included in each group. By using EquiTest 5.02, the static balance was measured by the equilibrium score and the strategy score of sensory organization test (SOT), while the dynamic balance was measured by the latency of motor control test (MCT) and the sway energy of adaptation test (ADT). Oswestry Disability Index (OSI) was used to measure level of the disability in patients with chronic LBP. The equilibrium scores, the strategies of SOT, and thelatencies of MCT of three groups were compared with one way ANOVA, while the sway energy of ADT was compared with repeated measures one way ANOVA. The results of this study showed that the equilibrium scores and the strategy scores of SOT were significantly lower in patients with chronic LBP than in healthy subjects. The equilibrium scores and the strategy scores of SOT were significantly differences between the FS and ES groups in condition 5 (support surface was sway-referenced and visual information waseliminated by eye closure), and 6 (support surface was sway-referenced and visual information was altered by sway-referencing). The FS group showed delayed average reaction time at large posterior translation, however, the ES group showed delayed average reaction time at large anterior translation, Even though the sway energy of the patients with chronic LBP were greater than that of healthy subjects during the toe down (plantar flexion rotation), the values between the FS and ES groups didn't show any significant difference. The disability level showed highly correlation with the equilibrium score of the condition 5. As the results, the FS and ES groups divided by the their symptoms and signs in patients with chronic LBP showed different balance reaction. Therefore, more accurate evaluation and balance treatments are needed to focus on their symptoms and signs in patients with chronic LBP.

  • PDF

진한 염산용액에서 Alamine336에 의한 염화코발트의 용매추출 (Solvent Extraction of Cobalt Chloride from Strong Hydrochloric Acid Solutions by Alamine336)

  • 이만승;이진영
    • 대한금속재료학회지
    • /
    • 제46권4호
    • /
    • pp.227-232
    • /
    • 2008
  • Solvent extraction reaction of cobalt by Alamine336 from strong hydrochloric acid solution was identified by analyzing the solvent extraction data reported in the literature. Analysis of the data by graphical method revealed that Alamine336 took part in the solvent extraction reaction as a monomer in the concentration ranges, [Co(II)] : 0.0169 - 0.102 M, [Alamine336] ; 0.02- 1.75 M, and [HCl ] : 5 - 10 M. The following solvent extraction reaction and equilibrium constant was obtained from the experimental data by considering the activity coefficients of chemical species present in the aqueous phase. $Co^{2+}+2Cl^{-}+R_3NHCl_{org}=CoCl_3\;R_3NH_{org}$, $K_{ex}=2.21$ The distribution coefficients of cobalt predicted in this study agreed well with those reported in the literature.

농후 연소 가스발생기의 비평형 연소 화학반응 모델링 (Modeling of Non-Equilibrium Kinetics of Fuel Rich Combustion in Gas Generator)

  • 유정민;이창진
    • 한국항공우주학회지
    • /
    • 제34권7호
    • /
    • pp.89-96
    • /
    • 2006
  • 액체 로켓의 가스발생기의 연소 온도는 터빈 깃의 열 손상을 방지하기 위하여 1,000K 이하로 유지되며 이를 위하여 농후 연소 또는 산화제 과다 연소를 유지한다. 이러한 이유로 연소는 비평형 화학반응이 주로 발생하며 연소반응을 예측하기가 매우 어렵다. 한편 케로신은 여러 가지 탄화수소 연료로 이루어진 혼합연료로 화학반응 메커니즘에 대한 모델이 매우 어려운 실정이다. 본 연구에서는 Dagaut가 개발한 207 화학종, 1592 화학반응 단계를 이용하였으며 완전혼합반응기 연소모델을 적용하여 계산하였다. 계산결과와 실험결과를 비교하여 보면 사용된 화학반응 기구가 검댕 예측을 하지 않고 있음에도 불구하고 계산 결과는 연소가스 온도 뿐 아니라 가스 물성치 등을 매우 잘 예측하고 있음을 확인하였다.

수소저장합금의 전기화학 및 열역학적 특성에 관한 연구 (A Study on the Electrochemical and Thermodynamic Properties of Hydrogen Absorbing Alloys)

  • 박찬교;조태환
    • 한국수소및신에너지학회논문집
    • /
    • 제5권2호
    • /
    • pp.65-71
    • /
    • 1994
  • Electrochemical and thermodynamic properties of $MmNi_5$ and the related alloys for nickel-metal hydride battery(Ni-MH) were studied in terms of the equilibrium hydrogen pressure. $MmNi_5$ alloy with high equilibrium hydrogen pressure(10~20atm at room temperature), which is usually difficult to charge, was substituted for Al in part. Partial substitution of Al made not only the equilibrium pressure to be reduced remarkably, but also the enthalpy change depending on the formation of metal hydride to be agreed to the value in gas phase reaction and electrochemical reaction. Besides the composition of Al which can be given the maximum discharge capacity was turned out to be between the 0.5~1.0 atoms of Al.

  • PDF

작용기의 종류에 따른 반응염색의 열역학 (Thermodynamics of Reactive Dyes with Different Functional Groups)

  • 도성국
    • 한국염색가공학회지
    • /
    • 제10권3호
    • /
    • pp.36-42
    • /
    • 1998
  • The dyeabilities of C.I. Reactive Blue 19(B19, MW ; 626), C.I. Reactive Blue 4(B4, MW ; 637) and C.I. Reactive Black 5(B5, MW : 991) were investigated. Initial dyeing rates were increased and the amount of dye on the fabric at equilibrium was decreased with temperature like other ordinary dyeing processes. Activation entropy$(\Delta{S}^*)$ was decreased because of loose bonding between dyestuffes and fiber molecules at transition state. It can be clarified that the entire reaction is exothermic and the number of molecular species at transition state becomes greater from decrease in activation enthalpy$(\Delta{H}^*)$ and the increase in activation free energy$(\Delta{G}^*)$ with temperature, respectively. The amount of B19 on the fabric at equilibrium was greater than that of B4, because B4 became unreactive towards textile substrates through hydrolysis. Due to the biggest size of the dye molecule, the reaction rate of B5 was the slowest but its difunctional group played an important role in achieving the greatest amount of dye on the fabric at equilibrium.

  • PDF

N-사이크로헥실말레아민산 이소부틸 에스테르의 제조 공정 개발 (Development of a Synthetic Process for N-Cyclohexylmaleiamic Acid Isobutyl Ester)

  • 문부현;주창식
    • Korean Chemical Engineering Research
    • /
    • 제51권5호
    • /
    • pp.545-549
    • /
    • 2013
  • 높은 수율로 CHMI를 제조하는 공정을 개발하기 위한 연구의 일환으로, 공정 중간체 CHMAIE를 합성하는 실험적 연구를 수행하였다. CHMAIE 제조 공정의 중간체인 CHMA 생성반응은 무수 말레인산 용액에 사이크로헥실아민을 점적 투입한 후 반응액을 2시간 동안 숙성시키는 방법으로 완료하였으며, 생성된 CHMA를 $10^{\circ}C$ 이하에서 2.5시간 동안 석출시키면 98.2%의 수율을 얻을 수 있었다. CHMA로부터 CHMAIE를 제조하는 에스테르화 반응의 최적 온도는 $68^{\circ}C$ 이었으며, 이 최적 온도에서의 평형 전화율은 98.5%였다. 에스테르화 반응이 평형에 도달하는 시간은 온도에 따라 감소하며, 최적 온도에서의 평형도달 시간은 약 3시간 정도였다. 최종 생성물 중의 톨루엔은 진공 증류를 통하여 회수할 수 있었다. 톨루엔의 회수율은 증류 온도가 증가함에 따라 증가하였고, 증류 온도 $55^{\circ}C$에서의 톨루엔 회수율은 98%였다.

황 회수 공정 설계에서 부 반응의 영향 (The Impact of Side Reactions in Sulfur Recovery Unit Design)

  • 김성호;정원석;이희문;장근수
    • 플랜트 저널
    • /
    • 제13권3호
    • /
    • pp.36-46
    • /
    • 2017
  • 황회수 공정의 연소반응기 안에서는 평형반응 및 kinetic 반응이 동시에 일어난다. 주요 kinetic 반응에 참여하는 성분들은 수소($H_2$), 일산화탄소(CO), 카보닐황화물(COS) 그리고 이황화탄소($CS_2$) 이다. 본 연구에서는 평형반응, 상관관계식(empirical correlations) 그리고 황 회수 공정의 라이센서 자료의 비교를 통해 반응기에서 kinetic components (COS와 $CS_2$)의 생성 양을 분석한다. 또한 kinetic components ($H_2$ 와 CO)의 생성 양의 분석을 통해 반응기에서의 생성 양과 온도와의 상관관계를 분석한다. 부 반응이 전체 연소에 필요로 하는 산소의 양에 어떤 영향을 미치는지도 같이 분석을 한다. 황회수 공정의 반응기내의 부 반응에 대한 충분한 이해는 전체 황회수 공정 설계를 할 때 최적의 장치 설계를 가능하게 하고 나아가 황회수 효율을 극대화 하는데 도움이 된다.

  • PDF

Benzhydrol 類의 Schmidt 反應에 있어서의 Pre-equilibrium (Pre-equilibrium in the Schmidt Reaction of Benzhydrols)

  • 변형직
    • 대한화학회지
    • /
    • 제8권1호
    • /
    • pp.25-29
    • /
    • 1964
  • Benzhydryl azide 類에 Benzhydrol 類를 混合하여 Schmidt 反應을 逐行할 때에 Benzhydryl 基 間에 完全한 Radical exchange 現象이 일어남을 알았다. 故로 Benzhydrol 類의 Schmidt 反應에 있어서는 一但 生成된 Benzhydryl azide가 濃硫酸存在下에서 Benzhydryl cation과 Hydrazoic acid로 分離되어 完全平衡狀態에 있음을 確認할 수 있었다.

  • PDF