• Korean Journal of Food Science and Technology
• /
• v.20 no.3
• /
• pp.399-404
• /
• 1988

The sorption characteristics of garlic powder stored at various relative humidities and storage temperatures were studied. At lower relative humidity below RH 51%, the sorption equilibrium was easily attained, whereas at higher relative humidity above RH 67%, the powders were browned by higher equilibrium moisture content. The powders were browned at relative humidity above 67% at $20^{\circ}C\;and\;35^{\circ}C,\;above\;84%\;at\;5^{\circ}C$, respectively. The moisture contents of monolayer value for the powder were ranged from 5.53%(DB) to 5.92% (DB) with varying temperatures. And the necessity of moistureproof packaging material suggested for the long term storage of the powder because the lower moisture content and storage temperature, the higher driving force of wetting.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.896-905
• /
• 1993

Thin-layers of wheat and barley are dried at near-ambient temperatures(3.5$^{\circ}C$ -5$0^{\circ}C$) in order to obtain the intrinsic drying data. The well established apparatus was modified to enable it to record all the sample weight data in still air by using a purpose -built automatically controlled sliding valve. The air could be diverted in less than 0.5seconds and a 7 second period was required to attain a steady weight reading. With this apparatus, very smooth drying curves were obtained. The data of sample weight , drying temperature and dew point temperature wee recorded continuously . The drying process was terminated when the moisture content change in 24 hours was less than 0.004 d.b. This was achieved by drying a sample for about a week . The final points were recorded as the dynamic equilibrium moisture content(EMC). The drying data were than fitted to the exponential Newton model and the dynamic EMC data were fitted to the Modified-Chung-Pfost Model . All the fitted parameters are given and comparison is made with previous published data. The comparisons who that the current drying constants are lower than the previous data, the dynamic EMC data obtained for wheat and barely agree with the previous data. The results show that to obtain the drying constant in the exponential Newton model, adequate drying time is necessary.

• Journal of Biosystems Engineering
• /
• v.19 no.2
• /
• pp.112-123
• /
• 1994

At present, no appropriate drying conditions can be found for the heated-air drying of mushroom in Korea. Usually, mushroom is being dried at the temperature range of 40 to $50^{\circ}C$ until the moisture content reaches 10~13% (wb). However, drying characteristics of the mushroom should be investigated for quality improvement and efficient drying operation of the mushroom. The results of this study may be summarized as follows ; 1. The effect of air temperature on the rate of drying was greater than that of relative humidity for drying of mushroom, and the rate of drying was increased with increase in the air temperature. 2. Drying rate for Shiitake mushroom showed falling-rate period of drying without constant-rate period of drying. Drying rate for Oyster mushroom showed a short constant-rate period at the initial stage of drying process, and followed by falling-rate period of drying. 3. Exponential and App.-Diffusion models were found to describe well the drying process of Shiitake mushroom. Exponential and Thompson models for Oyster mushroom in which Thompson model was the most suitable for Oyster mushroom. 4. The equilibrium moisture content of the mushroom decreased with decrease in the air temperature and increase in the relative humidity. In room condition($20^{\circ}C$, 54% RH), the calculated values of the equilibrium moisture content showed 11.17% for Shiitake mushroom and 13.19% for Oyster mushroom, respectively.

• Journal of the Korea Furniture Society
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2006

Movement behavior, shrinkage and equilibrium moisture content (EMC), in this experiment reflected a change of hygroscopicity mainly affected by continuously compressive load during radio-frequency/vacuum (RF/V) drying and humidity changes during equilibrating. As a result of interaction of the compressive load and moisture content changing under the RF/V condition, the shrinkages in loading direction were significantly increased while those perpendicular to loading direction were decreased. The shrinkages were affected most in tangential, and least in longitudinal direction. The shrinkages showed higher values in continuous drying than in intermittent drying. In the direction of increased shrinkage, all the movements were also increased, for example, the tangential movement for the loaded-RS and the radial movement for loaded-TS; in the direction of decreased shrinkage, all the movements except the tangential movement for the loaded-TS were decreased such as the tangential and radial movements for the loaded-ES, and the radial movement for the loaded-RS, comparing with those of the load-free. EMCs of the loaded specimens were all higher than that of the load-free specimen, and the highest for the loaded-TS, the lowest for the loaded-ES. The transverse hygroscopicity of specimen was reduced for the loaded-ES, but increased for the loaded-TS.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.4
• /
• pp.1-5
• /
• 1998

In this study, it was examined the method to estimate equilibrium moisture content(EMC) at high vapor pressures and high temperatures above $100^{\circ}C$. The material used for the experiment was Sugi(Cryptomeria japonica). EMC was investigated at temperatures ranging from $100^{\circ}C$ to $160^{\circ}C$ and under saturated vapor pressures above 1 atm. The correlation between temperatures and vapor pressures have a good agreement with those observed by thermocouple and pressure gauge in the air state of autoclave, respectively. A sensitivity of quartz spring was 65mm/g. Moisture content(MC)s calculated from the quartz spring elongation by vapor sorption showed a good agreement with MCs by oven-dried method. Using this system, it was found that EMC at high vapor pressures and high temperatures above $100^{\circ}C$ were higher than EMC of wood in 1 atm pressure conditions. With this system, therefore, it was concluded that the EMCs of wood and wood-based materials at high temperatures were able to be evaluated.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.1
• /
• pp.28-36
• /
• 1997

Several thick board and dimension lumbers of Japanese larch(Larix leptolepis), Dahurian larch(Larix gmelini) and radiata pine(Pinus radiata) air-dried in four different seasons to compare air-drying process. Patterns of air-drying curves were influenced by climatological conditions and limber thickness. The initial drying rates of summer were the highest, followed those of fall, spring and winter. The drying times to equilibrium moisture contents for four seasons were nearly the same except for winter. However, the drying time for winter required twice more time than the other seasons. The drying time of dimension lumbers required 1.3 times more than boards. The final moisture contents were lowest during spring, highest during winter and similar between summer and fall.

• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.690-695
• /
• 1990

The adsorption characteristics of coffee were mvestigated at $5, 15, 25, and 35^{\circ}C$ under various water activities such as 11, 32, 57, 75 and 90% and prediction models were developed by optimization program. The moisture adsorption isotherm curves were similar to the typical sigmoid type. The values of equilibrium moisture content and the monolayer moisture content were highest in the Freeze Dried, which was due to porous structure by the drying method. In the result of adjusting the isotherm models in this paper, Halsey model generally gave the best fit for isotherms of coffee. Prediction model for equilibrium moisture content was established with water activity and temperature. Adsorption prediction models were also developed with water activity, with water activity and time, and with water activity, time and temperature, respectively.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.11 no.2
• /
• pp.91-96
• /
• 2005

Determination of safety factor of corrugated fiberboard boxes used for agricultural products is very complicated process due to nature of living products. Moisture content is one of the most critical factors to determine overall physical strength of paper, so its influences on strength properties of corrugated board made from different raw materials must be quantified. The results obtained from the study were summarized as follows; 1. Results show a detrimental effect on bursting strength and compressive strength of liners with increasing relative humidity of environment and moisture content of liners. 2. The relevance of equilibrium moisture content at varying relative humidity levels was proved and its relationship was used as an important factor to estimate box compression strength. 3. Test results was statistically used for establish the relationship between relative humidity and moisture content of liners. Estimated compression strength of boxes at varying moisture content was similar to results of theoretical equations such as Kellicutt's. Further study could be carried out in order to determine a optimum safety factors of various corrugated board boxes for agricultural products.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.12a
• /
• pp.456-461
• /
• 1999

• Journal of Biosystems Engineering
• /
• v.15 no.1
• /
• pp.44-51
• /
• 1990

Four models in current use for cereal grain drying, equilibrium model, Morey model, partial differential equation model and simplified partial differential equation model, were modified to be suitable for natural air drying of barley. The predicted by the four models and experimental results were compared. Three models except equilibrium model predicted moisture comtent and grain temperature very well. But equilibrium model overpredicted moisture content and grain temperature of bottom layer. The degree of prediction of the four models for relative humidities of exhaust air didn't differ much from one another and equally the four models predicted relative humidity statisfatorily. Morey model took much shorter computing time than any other models. Therefore, considering the degree of prediction and computing time Morey model was the most suitable for natural air drying of barley.