• 한국화재소방학회논문지
• /
• 제23권3호
• /
• pp.17-22
• /
• 2009

에폭시 분체도료는 부스닥트, 및 전기기기에 절연재료로 광범위하게 사용되어 진다. 특히 Coating 절연 방식의 경우 전류에 의한 줄 열로 인해 전기화재 및 폭발의 점화 원인이 된다. 본 연구는 에폭시분체도료의 열화특성에 대해 절연파괴, 아크방전, 수명특성(V-t)을 중심으로 비교검토하고 이에 대한 기초데이터 확보 및 전기화재 원인인 절연특성에 대해 연구 하였다. 온도변화에 따른 절연특성은 시편 KS가 유리전이온도(Tg) 이전까지 $8{\sim}10%$ 정도의 감소로 안정적이었다. V-t 및 아크방전특성의 경우, 열화시편에서도 안정적 특성을 유지하였다. 열화에 의한 전기적특성의 경우 시편KS가 우수한 성능을 가지고 있다.

• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.325-336
• /
• 2010

In this study, we experimented that how to synthesis waterborne urethane-epoxy hybrid resin for leather garment coatings. First of all, We had analyzed datas by FT-IR, SEM and TGA for the machanical properties. By instruments analysis measurement we confirmed that synthesis of urethane and epoxy. In this experiment we knew that polyurethane and urethane-epoxy hybrid resin have 4~5 grades of solvent resistance. Tensile strength measured in the urethane-epoxy resin(epoxy 12%, 2.033$kg_f/mm^2$) had the most strong strength than polyurethane(1.833 $kg_f/mm^2$) emulsion samples. Also urethane-epoxy hybrid resin had better result than polyurethane in acid resistance and abrasion test. As hight proportion of epoxy in hybid resin, we obtained low elongation and low flexibility. In this result, the mechanical properties of waterborne polyurethane-epoxy hybrid resin showed that how effect in leather coating by ratio of epoxy emulsion.

• 콘크리트학회논문집
• /
• 제20권6호
• /
• pp.713-719
• /
• 2008

철근콘크리트내의 염분침투저항성을 향상시키기 위한 방안으로 다양한 철근 방청 코팅기법이 개발되어져왔다. 이와 관련된 가장 일반적인 방법으로서는 방청철근의 사용, 시멘트 슬러리 코팅 및 폴리머계 복합수지를 사용한 철근 코팅 및 에폭시 코팅등을 들 수 있다. 여기서 폴리머계 시멘트 코팅이 철근의 부동태 피막 및 장벽보호를 동시에 꾀함과는 달리 시멘트 슬러리 코팅의 경우는 철근의 부동태 보호에, 에폭시 코팅의 경우는 철근의 장벽보호에 주 목적을 두고 있다. 더욱이 에폭시코팅의 경우는 시공상의 오차로 인해 철근의 비부착 문제를 일으키게 되며 이는 국부부식의 위험을 증대시키게 된다. 본 연구에서는 철근-콘크리트 계면에서, 최대 20%의 수산화칼슘의 증가를 통한 방청기법이 적용되어졌다. 수산화칼슘의 경우 높은 pH저하저항성을 가지고 있어 염해부식환경에 대해 알칼리성 환경이 유지하도록 하는 역할을 한다. 본 논문은 철근/콘크리트 계면에서의 pH 저하 저항성의 향상 방안으로서, 수산화칼슘의 첨가에 따른 철근 방청코팅의 향상 효과를 시험하였다. 또한 수산화칼슘을 혼입한 폴리머 코팅의 염화물임계치 (CTL)에 관해서도 비교분석을 하였다.

• International Journal of Concrete Structures and Materials
• /
• 제2권2호
• /
• pp.99-105
• /
• 2008

Southern exposure test specimens were used to evaluate corrosion performance of epoxy-coated reinforcing bars in chloride contaminated concrete by electrochemical impedance spectroscopy method. The test specimens with conventional bars, epoxy-coated bars and corrosion inhibitors were subjected 48 weekly cycles of ponding with sodium chloride solution and drying. The polarization resistance obtained from the Nyquist plot was the key parameter to characterize the degree of reinforcement corrosion. The impedance spectra of specimens with epoxy-coated bars are mainly governed by the arc of the interfacial film and the resistance against the charge transfer through the coating is an order of magnitude higher than that of the reference steel bars. Test results show good performance of epoxy-coated bars, although the coatings had holes simulating partial damage, and the effectiveness of corrosion-inhibiting additives. The corrosion rate obtained from the impedance spectroscopy method is equivalent to those determined by the linear polarization method for estimating the rate of corrosion of reinforcing steel in concrete structures.

• 한국건축시공학회지
• /
• 제17권4호
• /
• pp.331-339
• /
• 2017

본 연구는 시멘트 종류, 폴리머 종류, 폴리머 시멘트비, 도장두께를 변화시켜 만든 PCS 도장철근의 시멘트 콘크리트에 대한 부착강도 시험을 실시하여 PCS 도장철근의 부착강도에 영향을 미치는 양생재령과 도장두께에 대하여 평가하고자 하였다. 또한 부착강도 시험결과로 얻어진 최적배합으로 만든 PCS 도장철근을 사용하여 철근콘크리트 보를 제작하여 휨 응력 시험을 실시하여 간접적으로 부착성을 평가하였다. 시험결과, PCS 도장철근의 부착강도는 양생재령 7일과 도장두께 $100{\mu}m$에서 최대치를 나타냈는데, 이는 보통 철근의 1.52배 및 에폭시 도장철근의 1.58배였다. 또한 PCS 도장철근을 사용한 철근콘크리트 보의 최대 파괴하중은 보통철근의 최대 파괴하중의 81.1%~102.3% 범위였으며, 에폭시 도장철근의 최대 파괴하중의 98.4%~124.1% 범위로 나타났다. 본 연구결과, 도장두께 $100{\mu}m$, 폴리머 종류 EVA, 폴리머 시멘트비 80%, 양생재령 7일 조건으로 만든 PCS 도장철근은 실제 건설현장의 철근콘크리트 구조물의 도장철근으로 활용할 수 있는 가능성을 확인하였다.

• 한국환경과학회지
• /
• 제17권11호
• /
• pp.1227-1233
• /
• 2008

The effect of freeze drying and fixatives in post-treating freeze drying on the morphological properties of the rose (Rosa hybrida L.) petal were investigated for the production of high quality of freeze dried rose. The morphology including form and color of the dried flowers of cut rose were depended on the drying methods. The drying time was extended due to their density and water content, and was shorter in the freeze drying than that in the natural and hot air drying. Freeze dried process for dried flowers took 2 days in a freeze dryer and did not cause shrinkage or toughening of rose petal being dried, preserving its natural shape and color. The diameter of freeze dried flowers showed little reduction compared to fresh flowers. In Hunter color values of petals of freeze dried flowers, L and a values were high and showed little variations in comparison to fresh petals. Freeze drying led to a noticeable increase in anthocyanin contents in petals, suggesting that anthocyanin contents play an important role in the acquisition of freezing tolerance. Exposure of flowers to freeze drying was accompanied by an increase in the carotenoid content. In the post-treating freeze drying, epoxy resin, a fixative, applied alone or in combination to petals of freeze dried flowers showed efficient coating for the protection from humidity and sunlight. Combined application of epoxy and acetone to freeze dried petals permitted maintenance of natural color and excellent tissue morphology, showing color stability and shiny texture in surface of petals. These findings suggest that application of fixatives to freeze dried rose petals improves the floral preservation and epoxy coating provides good quality in the freeze dried flower product.

• Corrosion Science and Technology
• /
• 제20권4호
• /
• pp.169-174
• /
• 2021

In this study, performance tests, a field evaluation, and a life cycle cost (LCC) analysis for high performance coating systems were conducted to prepare a plan to reduce the cost of maintenance coating and contribute to the service life extension of steel bridges by applying high performance coatings to steel bridges that will be constructed in the future. From the deterioration models based on the field evaluation for chlorinated rubber and urethane topcoat systems, which have been applied often, the mean service lives were derived as 20.8 and 26.6 years, respectively. For the other coating systems that have not been applied in practice, the coordination factors were differentially applied with evaluation items. The most durable coating system was predicted to be thermal spray coating (TSC) primer/epoxy intermediate coat/fluoride resin topcoat, with a predicted value as long as 42.2 years. The LCC analysis indicates that partial application of high performance coating, such as TSC and fluoride resin, to specific parts vulnerable to corrosion and ultraviolet ray (UV) is more advantageous than the use of general coating systems.

• Corrosion Science and Technology
• /
• 제19권1호
• /
• pp.8-15
• /
• 2020

In this paper, the efficiency and the inhibition mechanisms of cobalt salts (cobalt nitrate and cobalt-exchange silica Co/Si) for the corrosion protection of AA2024 were investigated in a neutral aqueous solution by using the electrochemical impedance spectroscopy (EIS) and polarization curves. The experimental measurements suggest that cobalt cation plays a role as a cathodic inhibitor. The efficiency of cobalt cation was important at the concentration range from 0.001 to 0.01 M. The formation of precipitates of oxides/hydroxides of cobalt on the surface at low inhibitor concentration was confirmed by the Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) analysis. EIS measurements were also conducted for the AA2024 surface covered by water-based epoxy coating comprising Co/Si salt. The results obtained from exposure in the electrolyte demonstrated the improvement of the barrier and inhibition properties of the coating exposed in the electrolyte solution for a lengthy time. The SEM/EDS analysis in artificial scribes of the coating after salt spray testing revealed the release of cobalt cations in the coating defect to induce the barrier layer on the exposed AA2024 substrate.

• 전자진흥
• /
• 제3권9호
• /
• pp.79-83
• /
• 1983

• 펄프종이기술
• /
• 제30권2호
• /
• pp.62-73
• /
• 1998

The aim of this work was to investigate the effects of pigment composition on the calendering response and structure of the coated paper. Calendering response of the coated paper was determined from the gloss values of the uncalendered and calendered coated papers, and the relationship between gloss and coating structure was discussed. The surface and cross section of the coating layer was observed using a scanning electron microscope to examine the coating structure. Coating layers were hardened in epoxy resin and polished with carbimet paper disc for preparing SEM samples. Maximum calendering response was obtained for the coated paper prepared from 80pph of clay and 20pph of ground calcium carbonate (GCC) as pigments. Photomicrographs of the surface and cross section of the coating layer show that clay tends to form dense coating structure, while GCC tends to form bulky coating layer.