• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.8-9
• /
• 2017

Soybean yield has been low and unstable in Japan and other areas in East Asia, despite long history of cultivation. This is contrasting with consistent increase of yield in North and South America. This presentation tries to describe perspective of breaking stagnation of soybean yield in East Asia, considering the factors of the different yields between regions. Large amount of rainfall with occasional dry-spell in the summer is a nature of monsoon climate and as frequently stated excess water is the factor of low and unstable soybean yield. For example, there exists a great deal of field-to-field variation in yield of 'Tanbaguro' soybean, which is reputed for high market value and thus cultivated intensively and this results in low average yield. According to our field survey, a major portion of yield variation occurs in early growth period. Soybean production on drained paddy fields is also vulnerable to drought stress after flowering. An analysis at the above study site demonstrated a substantial field-to-field variation of canopy transpiration activity in the mid-summer, but the variation of pod-set was not as large as that of early growth. As frequently mentioned by the contest winners of good practice farming, avoidance of excess water problem in the early growth period is of greatest importance. A series of technological development took place in Japan in crop management for stable crop establishment and growth, that includes seed-bed preparation with ridge and/or chisel ploughing, adjustment of seed moisture content, seed treatment with mancozeb+metalaxyl and the water table control system, FOEAS. A unique success is seen in the tidal swamp area in South Sumatra with the Saturated Soil Culture (SSC), which is for managing acidity problem of pyrite soils. In 2016, an average yield of $2.4tha^{-1}$ was recorded for a 450 ha area with SSC (Ghulamahdi 2017, personal communication). This is a sort of raised bed culture and thus the moisture condition is kept markedly stable during growth period. For genetic control, too, many attempts are on-going for better emergence and plant growth after emergence under excess water. There seems to exist two aspects of excess water resistance, one related to phytophthora resistance and the other with better growth under excess water. The improvement for the latter is particularly challenging and genomic approach is expected to be effectively utilized. The crop model simulation would estimate/evaluate the impact of environmental and genetic factors. But comprehensive crop models for soybean are mainly for cultivations on upland fields and crop response to excess water is not fully accounted for. A soybean model for production on drained paddy fields under monsoon climate is demanded to coordinate technological development under changing climate. We recently recognized that the yield potential of recent US cultivars is greater than that of Japanese cultivars and this also may be responsible for different yield trends. Cultivar comparisons proved that higher yields are associated with greater biomass production specifically during early seed filling, in which high and well sustained activity of leaf gas exchange is related. In fact, the leaf stomatal conductance is considered to have been improved during last a couple of decades in the USA through selections for high yield in several crop species. It is suspected that priority to product quality of soybean as food crop, especially large seed size in Japan, did not allow efficient improvement of productivity. We also recently found a substantial variation of yielding performance under an environment of Indonesia among divergent cultivars from tropical and temperate regions through in a part biomass productivity. Gas exchange activity again seems to be involved. Unlike in North America where transpiration adjustment is considered necessary to avoid terminal drought, under the monsoon climate with wet summer plants with higher activity of gas exchange than current level might be advantageous. In order to explore higher or better-adjusted canopy function, the methodological development is demanded for canopy-level evaluation of transpiration activity. The stagnation of soybean yield would be broken through controlling variable water environment and breeding efforts to improve the quality-oriented cultivars for stable and high yield.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.3
• /
• pp.95-105
• /
• 1985

This dissertation presents an exact solution for the normal and shearing stresses of an orthotropic plane body loaded by a moment load. The solution satisfies the conditions of equilibrium compatibility equations concurrently and is governing for the body being in the elasto-plastic state. An Airy stress function is introduced to solve the problem related to an orthotropic half-infinite plane under a moment load. All the equations for orthotropy must be degenerated into the expressions for isotropy when orthotropic constants are replaced by isotropic ones. The author has evaluated all the equations of orthotropy and succeeded in obtaining exactly identical expressions to the equations of isotropy which were derived independently by of L'hosptials rule. The analytical results of isotropy are compared with the simple results of other investigator. Since moment Load under the elastic state and plastic state only is a particular case of moment load under the elasto-plastic state. All the equations of elasto-plastic state case are degenerated into the expressions for the each case. The formal solution is expressed in terms of closed form. The orthotropic constants are evaluated for two kinds and two different orientations of the grain of wood and two kinds of structures. The numerical results for orthotropy are evaluated for one kind and two different orientations of three-layered ply wood. The distribution of normal and shearing stresses are shown in figures. It is noted that the distribution of stresses of orthotropic materials depends on the type of materials and orientations of the grain and stiffening.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.65-79
• /
• 1992

This study is concerned with the optimal design of two hinged steel arches with I cross sectional type and aimed at the exact analysis of the arches and the safe and economic design of structure. The analyzing method of arches which introduces the finite difference method considering the displacements of structure in analyzing process is used to eliminate the error of analysis and to determine the sectional force of structure. The optimizing problems of arches formulate with the objective functions and the constraints which take the sectional dimensions(B, D, $t_f$, $t_w$) as the design variables. The object functions are formulated as the total weight of arch and the constraints are derived by using the criteria with respect to the working stress, the minimum dimension of flange and web based on the part of steel bridge in the Korea standard code of road bridge and including the economic depth constraint of the I sectional type, the upper limit dimension of the depth of web and the lower limit dimension of the breadth of flange. The SUMT method using the modified Newton Raphson direction method is introduced to solve the formulated nonlinear programming problems which developed in this study and tested out throught the numerical examples. The developed optimal design programming of arch is tested out and examined throught the numerical examples for the various arches. And their results are compared and analyzed to examine the possibility of optimization, the applicablity, the convergency of this algorithm and with the results of numerical examples using the reference(30). The correlative equations between the optimal sectional areas and inertia moments are introduced from the various numerical optimal design results in this study.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.4
• /
• pp.234-248
• /
• 1998

Seven box cores from the disposal areas located in the southern part of the East Sea (Stations Band B') and in the offshore to the east of Pusan (Stations J and J'), and from their surrounding areas (Stations J2, J6 and H) were collected to investigate the effect of dumped wastes on the foraminiferal assemblages. The species diversity indices [S, H(S), E] of foraminifera and the total number of foraminifera show significant differences between the ocean waste disposal areas and their adjacent areas. Ocean waste disposal areas located in southern part of the East Sea (Stations Band B') show not only smaller number of foraminifera species but also lower values of coarse fraction content in the sediment and the number of benthic and planktonic foraminifera than the surrounding areas. Another ocean disposal area located offshore Pusan (Station J') contains abnormally greater number of planktonic (approximately 300 000 individuals/lO g dried sediment) and benthic (approximately 300, 000 individuals/10 g dried sediment) foraminifera compared to those of the adjacent areas. The waste dumped at Station J' probably acts as a nutrient causing the greater number of foraminifera. Station J shows low species diversity indices [S, H(S)]. The number of benthic foraminifera decreases from the surface to the downcore at Station J, which indicates that Station J is under stress. However, Stations J', J2 and J6 are under stable conditions as evidenced by the greater species diversity indices [S, H(S)] compared to other stations. No foraminifera were found with biological disease or abnormal chambers, which commonly occur in extremely stressed environment, in both the ocean disposal and adjacent areas. The organic matter decay of the wastes dumped in the study areas has not made the bottom water corrosive.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.20 no.1
• /
• pp.43-52
• /
• 2015

The growth and population dynamics of eelgrass (Zostera marina) due to changes in sediment composition were examined in the lower intertidal zone of the Seomjin Estuary, Korea. We surveyed environmental factors such as water temperature, underwater irradiance, main types and organic content of sediment, tidal exposure, and nutrient concentrations in the water column and sediment pore water, in relation to the shoot density, biomass, morphological characteristics, and growth of Z. marina inhabiting lower intertidal zones. The survey was conducted monthly from May to December of 2004 and 2009. The water temperature showed obvious seasonal trends in both study years. Underwater irradiance was significantly higher in 2009 than in 2004. Tidal exposure was not significantly different between 2004 and 2009. The sediment was muddy-sand in 2004 but became sandy and with a significantly lower organic content in 2009. Water column $NH_4{^+}$ concentrations were significantly higher in 2004 than in 2009. Sediment pore water $NO_3{^-}+NO_2{^-}$ concentrations were significantly higher in 2009 than in 2004. Other nutrient concentrations did not differ significantly between 2004 and 2009. Morphological characteristics, including eelgrass length and leaf width were significantly lower in 2009 than in 2004. Eelgrass shoot height, leaf length, and sheath length showed typical seasonal patterns, increasing in early summer and decreasing in autumn, in both years. Vegetative shoot density was not significantly different between 2004 and 2009, while the biomass of individual plant parts and the total biomass were significantly lower in 2009. Eelgrass leaf productivity did not differ between years, but leaf turnover time was significantly shorter in 2009 than in 2004. Eelgrass downsizing and decreased turnover time in 2009 compared to 2004 indicate more effective adaptations to the stress of long-term changes in sediment composition. Overall, results suggest that changes in sediment composition can be a limiting factor for seagrass growth in the intertidal zone.

• Journal of Society of Preventive Korean Medicine
• /
• v.1 no.1
• /
• pp.85-104
• /
• 1997

As the concern about health is increased, the importance of preventive medicine that prevent disease in advance to overcome boundary of disease remedy gets emphasized in the whole world. The fundamental thoughts of oriental medicine are the harmony between the human body and nature, the unified idea regarding mind in the same light with body, and the symmetry of the cosmo dual forces. And oriental medicine is a kind of study that has developed on the ground of prevention thought. from old days, it has been developed the preventive medicine at is called 'Yangseng(養生; recuperation)' etc. with the clinical medicine. The preventive medicine of oriental medicine was taking a serious of the first preventive medicine of an incurable disease thought and the prevention thought that belongs to the second and third preventive medicine is described through the whole oriental medicine. Also the clinical and preventive medicine to apply to the clinics have an in- separable relation. Therefore I inspected the part of the preventive medicine described in some oriental medicine books and studied the characteristics of preventive medicine of oriental medicine as follows; First, the preventive medicine of oriental medicine has the characteristics that is emphasized generally in the first preventive medicine and wholly it is composed in the system of the first, second and third preventive medicine. It has the presentative theory such as 'Jungkijonae sabulkaghan(正氣存內 邪不可干; If good energy is in body, a disease. dosen't occur)', 'Husajukpung Phijeyushi(虛邪賊風 避之有時; When e infectious disease like plague break out, they must avoid the place occurring the disease)', 'Chuninsangeung(天人相應; The harmony of nature and human)' etc.. This is intimately related to the incurable disease thought of the inside diameter and oriental medicine has pursued that. Second, due to the most prerequisite theory of disease production, the balanced condition of environment, the cause of a disease and host is called the health. As oriental medicine has the system of aetiology like that, we can see the host and environments are importance most of all. Namely we can think of the relation of host >> environment > the cause a disease Up to date Jungkijonae Sabulkaghan(正氣存內 邪不可干) that the most oriental medicine doctors have had a knowledge is not whole theory but a pan of oriental medicine science and it is included in oriental medicine theory to avoid infectious disease such as Husajukpung Phijeyushi(虛邪賊風 避之有時). Third, according to the natural result of the first and second contents, we can know that its characteristics stress the remedy without drugs. Because Jungkijonae Sabulkaghan(正氣存內 邪不可干), Husasukpung Phijeyushi(虛邪賊風 避之有時), and Chuninsangeung(天人相應) mean that they prevent disease in condition of freedom from ailment, We can prevent the disease production through the positive preventive methods such as exercise, spirit, food and innate prevention etc.. fourth, the preventive medicine of oriental medicine has developed with therapeutics and it contains all oriental medical methods such as host, environment, exercise, acupuncture and moxibustion, innate or postnatal methods. Also it is the general preventive medicine that has fundamental philosophy of oriental medicine; for examples, the unified idea, the harmony of nature and human, and the unity of mind and body. fifth, to develope the above scientific merit and special features, the preventive medicine of Oriental medicine must be objectified and reemergent stud? gets more and more essential from now on. Especially we need to have the scientific concern of Oriental medicine about the cause of a disease, environmental hygiene, industrial sanitation, and personal hygiene etc..

• Journal of Chest Surgery
• /
• v.41 no.1
• /
• pp.89-94
• /
• 2008

Background: Thoracoscopic R3 sympathicotomy can effectively treat palmar hyperhidrosis. Here, we evaluated post-operative outcomes of patients receiving a thoracoscopic R3 sympathicotomy due to palmar hyperhidrosis. Material and Method: From January 2001 to December 2006, 225 patients were treated with a R3 sympathicotomy, and follow up was completed for 200 patients, with an average follow up period of 51.7 ($11{\sim}80$) months. We measured postoperative hand sweating according to four grades; dry (grade 1), proper (grade 2), light sweating (grade 3), heavy sweating (grade 4) and evaluated patient satisfaction using 4 grades: very good (grade 0), good (grade1), regular (grade 2), and deficient (grade 3). Result: There were no differences in clinical parameters between the compensatory sweating group and the non-compensatory sweating group. There was a 83.5% compensatory sweating rate. The degree of compensatory sweating related to the patient's body mass index and was influenced by the season, environmental temperature, and emotional stress. Conclusion: The satisfaction rate was 61.5%, and the degree of satisfaction related to the development of compensatory sweating. Therefore, reducing compensatory sweating would increase patient satisfaction with R3 sympathicotomies.

• The Journal of the Petrological Society of Korea
• /
• v.15 no.4 s.46
• /
• pp.180-193
• /
• 2006

The Gilan area in the central-northern part of Uiseong Block of Cretaceous Gyeongsang Basin is composed of Precambrian metamorphic rocks, Triassic Cheongsong granite, Early Cretaceous Hayans Group, and Late Cretaceous-Paleocene igneous rocks. In this area, the faults of various directions are developed: Oksan fault of $NS{\sim}NNW$ trend, Gilan fault of NW trend, Hwanghaksan fault of WNW trend, and Imbongsan fault of EW trend. Several fracture sets with various geometric indicators, which determine their relative timing (sequence and coexistence relationships) and shear sense, we well observed in the Cheongsong granite, the basement of Gyeongsang Basin. The aim of this study is to determine the development sequence of extension fractures and the movement sense of shear fractures in the Gitan area on the basis of detailed analysis of their geometric indicators (connection, termination, intersection patterns, and cross-cutting relations). This study suggests that the fracture system of the Gilan area was formed at least through seven different fracturing events, named as Pre-Dn to Dn +5 phases. The orientations of fracture sets show (W) NW, NNW, NNE, EW, NE in descending order of frequency. The orientation and frequency patterns are concordant with those of faults around and in the Gilan area on a geological map scale. The development sequence and movement sense of fracture sets are summarized as follows. (1) Pre-Dn phase: extension fracturing event of $NS{\sim}NNW$ and/or $WNW{\sim}ENE$ trend. The joint sets of $NS{\sim}NNW$ trend and of $WNW{\sim}ENE$ trend underwent the reactivation histories of sinistral ${\rightarrow}$dextral${\rightarrow}$sinistral shearing and of (dextral${\rightarrow}$) sinistral shearing with the change of stress field afterward, respectively. (2) Dn phase: that of NW trend. The joint set experienced the reactivations of sinistral${\rightarrow}$dextral shearing. (3) Dn + 1 phase: that of $NNE{\sim}NE$ trend. The joint set was reactivated as a sinistral shear fracture afterward. (4) Dn +2 phase: that of $ENE{\sim}EW$ trend. (5) Dn +3 phase: that of $WNW{\sim}NW$ trend. (6) Dn+4 phase: that of NNW trend. The joint set underwent a dextral shearing after this. (7) The last Dn +5 phase: that of NNE trend.

• Korean Journal of Environment and Ecology
• /
• v.23 no.5
• /
• pp.431-438
• /
• 2009

The main purpose of this research is to prepare and provide basic materials for the propagational strategy of eelgrass by investigating on the morphological adaptation of Korean Zostera marina to ocean currents. An eelgrass plant mainly consists of rhizome, leaf sheath, leaves and roots. The rhizome is the horizontal stem of the plant that serves as the backbone from which the leaves and roots emerge. The leaf sheath is the bundle at the base of the leaves that holds the leaves together, protecting the meristem, the primary growth point of the shoot. Leaves originate from a meristem which is protected by a sheath at the actively growing end of the rhizome. As the shoot grows, the rhizome elongates, moving across or within the sediment, forming roots as it progresses. The aggregated leaves from the leaf sheath are found to have two cell layers on one side and multiple layers of airy tissues called aerenchyma on the other. The aerenchyma tissues are developed in multi-layered cell structures surrounding the veins which are formed in the leaf sheath. Generative shoots are made of rhizomes, which are circular or ovoidal, stem, and spathe and spadix. The transverse section of rhizome and the stem and central floral axis is found to be circular, ovoid and in the shape of convex respectively, and the vascular bundle, which is a part of transport system, has one large tube in the center and two small tubes on both sides. The layers of collenchyma cells numbered from 12 to 15 in the stem, and from 7 to 12 in the rhizome. The seed coat is composed of sclereids, small bundles of sclerenchyma tissues, which prevent the influx of sea water from the outside and help endure the environmental stress. In conclusion, alternative multi-layer structure in circular, convex type aggregated leaf base are interpreted to morphological adaption as doing tolerable elastic structure through movement of seawater. The generative shoots develop long slim stem and branches in circular or ovoidal shapes to minimize the adverse impacts of sea current, which can be interpreted as the plant's morphological adaptation to its environment.