• 제목/요약/키워드: Environmental loads

검색결과 1,516건 처리시간 0.026초

수질오염총량관리를 위한 유역모형의 유달 과정 재현방안 연구 (Study on Representation of Pollutants Delivery Process using Watershed Model)

  • 황하선;이한필;이성준;안기홍;박지형;김용석
    • 한국물환경학회지
    • /
    • 제32권6호
    • /
    • pp.589-599
    • /
    • 2016
  • Implemented since 2004, TPLC (Total Pollution Load Control) is the most powerful water-quality protection program. Recently, uncertainty of prediction using steady state model increased due to changing water environments, and necessity of a dynamic state model, especially the watershed model, gained importance. For application of watershed model on TPLC, it needs to be feasible to adjust the relationship (mass-balance) between discharged loads estimated by technical guidance, and arrived loads based on observed data at the watershed outlet. However, at HSPF, simulation is performed as a semi-distributed model (lumped model) in a sub-basin. Therefore, if the estimated discharged loads from individual pollution source is directly entered as the point source data into the RCHRES module (without delivery ratio), the pollutant load is not reduced properly until it reaches the outlet of the sub-basin. The hypothetic RCHRES generated using the HSPF BMP Reach Toolkit was applied to solve this problem (although this is not the original application of Reach Toolkit). It was observed that the impact of discharged load according to spatial distribution of pollution sources in a sub-basin, could be expressed by multi-segmentation of the hypothetical RCHRES. Thus, the discharged pollutant load could be adjusted easily by modification of the infiltration rate or characteristics of flow control devices.

수질오염총량관리 대상물질 선정을 위한 하천수질 평가 (Evaluation of Stream Water Quality to Select Target Indicators for the Management of Total Maximum Daily Loads)

  • 박준대;박재홍;오승영;이재관
    • 한국물환경학회지
    • /
    • 제29권5호
    • /
    • pp.630-640
    • /
    • 2013
  • It is one of the most critical steps identifying impaired waterbodies exactly in the selection of target water quality indicators for the management of Total Maximum Daily Loads (TMDLs). Excess ratio and excess level were applied and analyzed by the stream zone basis in order to evaluate water impairment for Nakdong, Geum, Youngsan and Seomjin rivers. Each river basin was divided into stream zones in the light of its watershed and waterbody characteristics. Selected water quality parameters discussed in this study were pH, DO, BOD, COD, SS, T-P, T-Coli and F-Coli. The excess ratios of the water quality parameters were used to discriminate water bodies that did not meet water quality standards. The excess levels were used to classify the degradation of water quality. The excess ratios and the excess levels to the water quality criteria of the medium influence areas were used for each stream zone. The results indicate that the excess ratios and the excess levels are varied on the stream zone in each river basin. Three parameters, pH, DO and SS, met water quality standards in all stream zones. The other five parameters indicated very high excess ratios in most waterbodies, and especially T-P and T-Coli revealed to be very high excess levels in some waterbodies. These parameters could be considered as major target indicators for the management of TMDLs.

총량관리 단위유역의 토지이용 변화 및 오염물질 배출형태 분석 (Analysis of Changes in Land Use and Pollution Load for the Unit Watersheds of Total Maximum Daily Loads)

  • 박준대;오승영;최옥연
    • 한국물환경학회지
    • /
    • 제30권2호
    • /
    • pp.128-137
    • /
    • 2014
  • The land use of the unit watersheds should be maintained appropriately in order to keep the load allotment stable for the management of Total Maximum Daily Loads (TMDLs). This study classified the land area in four types and analyzed the use of each land type and its changing pattern by calculating the occupation and conversion ratios for the unit watersheds in three river basins. The forest land showed the greatest occupation ratio with 63.0%, followed by the farm land with 23%, the other area with 8.0% and the site area with 6.0% in 2003. The occupation ratio of the site and the other area increased by 0.4% and 0.2% respectively, and that of the farm and the forest land decreased by 0.4% and 0.2% respectively in 2007. The conversion ratio for the site area ranged from 1.65% to 1.97%, for the farm land from -0.47% to -0.33%, for the forest land from -0.10% to -0.04% and for the other area from 0.17% to 1.97%. It can be inferred that the decrease in the farm and the forest land contributed to the increase in the site area and that the increase in the other area was mainly made by the decrease in the forest land. It could be more effective to take into account the changes in the site area and in the forest land in the process of developing the TMDL plans.

Simulation of chloride penetration into concrete structures subjected to both cyclic flexural loads and tidal effects

  • Mien, Tran Van;Stitmannaithum, Boonchai;Nawa, Toyoharu
    • Computers and Concrete
    • /
    • 제6권5호
    • /
    • pp.421-435
    • /
    • 2009
  • Chloride induced corrosion is a concern that governs the durability of concrete structures in marine environments, especially in tidal environments. During the service lives of concrete structures, internal cracks in the concrete cover may appear due to imposed loads, accelerating chloride penetration because of the simultaneous action of environmental and service structural loads. This paper investigated the effects of cyclic flexural loads on chloride diffusion characteristics of plain concretes, and proposed a model to predict the chloride penetration into plain concretes subjected to both tidal environments and different cyclic flexural load levels. Further, a new experiment was performed to verify the model. Results of the model using Finite Difference Method (FDM) showed that the durability of concretes in tidal environments was reduced as cyclic flexural load levels, SR, increased, and the modeling results fitted well with the experimental results.

Shielding effects on a tall building from a row of low and medium rise buildings

  • Zu, G.B.;Lam, K.M.
    • Wind and Structures
    • /
    • 제27권6호
    • /
    • pp.439-449
    • /
    • 2018
  • Wind loading of a tall building built amidst a group of buildings in urban environment is always greatly affected by shielding effects. Wind tunnel tests were carried out to assess the shielding provided by a row of low-rise or medium-rise buildings upstream a square-section tall building of height-to-breadth ratio 6. Mean and dynamic wind loads on the tall building were measured at different wind incidence angles and presented as interference factors (IFs). It is found that presence of a row of upstream buildings provides significant shielding to the tall building. At normal wind incidence, the mean along-wind loads and all components of fluctuating wind loads on the tall building are always reduced by shielding. Vortex shedding seems to still occur on the upper exposed part of the tall building but the vortex excitation levels are largely reduced. The degree of shielding is found to depend on a number of arrangement parameters of the row of upstream buildings. Empirical equations are proposed to quantify the shielding effect based on the wind tunnel data.

동적모델을 이용한 수질오염총량제 목표수질 설정 및 할당부하량 산정방안 연구 (The Study on Methods for Setting of Water Quality Goal and Estimation of Allocation Loads on TMDL System Using a Dynamic Water Quality Model)

  • 김은정;박배경;신동석;김용석;류덕희
    • 대한환경공학회지
    • /
    • 제36권9호
    • /
    • pp.629-640
    • /
    • 2014
  • 본 연구에서는 동적모델의 수질오염총량제 적용성을 검토하였으며, 동적모델을 이용한 목표수질 설정 및 할당부하량 산정 방법을 제시하고 그 결과를 분석하였다. 동적모델 중 HSPF 유역모형을 미호천 유역에 대하여 구축하였으며, 보정 결과 구축된 모형은 2009년~2010년에 대하여 일유량 변화와 BOD 농도 변화를 잘 재현하는 것으로 판단되었다. 동적모델을 이용한 수질오염총량제 적용 방안은 3가지 case; (1)저수기 조건을 고려한 수질관리 방법(Case I), (2)연중 전 기간을 고려한 수질관리 방법(Case II), (3)연중 최악의 수질조건을 고려한 수질관리 방법(Case III)으로 나누어 제시하였다. 미호천 유역 말단에서 각 조건에 따른 BOD 목표수질을 산정한 결과는 Case II(4.2 mg/L) < Case I(5.0 mg/L) < Case III(7.8 mg/L) 순으로 연중 전 기간을 고려한 경우에서 가장 낮고 최악조건을 고려한 경우에서 가장 높았다. 할당부하량은 Case II > Case I > Case III 순으로 높게 나타났으며 최악조건을 고려한 경우에서 가장 엄격한 할당부하량이 산정되었다. 기준 강우 선정 및 비점오염원의 모델 적용방식 등에 대한 추가연구가 필요하며, 이들이 반영된다면 수질오염총량제에 동적모델을 적용함으로 인해 좀 더 합리적이고 과학적인 수질관리가 이루어질 것이라 사료된다.

산정방법에 따른 논 원단위 비교 (Comparison of Unit Load from Paddy Field by Various Estimation Methods)

  • 최동호;정재운;윤광식;최우정;조소현;범진아;유승화
    • 환경영향평가
    • /
    • 제24권5호
    • /
    • pp.407-419
    • /
    • 2015
  • 본 연구는 영산강 수계 1지점과 섬진강 수계 1지점의 논 유출수 4년간 유량과 수질 모니터링 자료를 이용하여 원단위 산정방법에 따른 원단위 차이를 비교하였다. 원단위 산정방법은 실측부하량을 이용한 방법, 국립환경과학원의 새로운 원단위 산정 방법(NIER 방법), EMC 확률분포모형 중앙값을 이용한 방법, 산술평균 EMC와 산술평균 유출율을 이용한 방법을 활용하였다. 원단위 산정방법별 차이를 살펴본 결과 실측부하량을 이용한 방법과 NIER 방법의 원단위는 서로 비슷한 값을 보였지만, 확률분포모형(Lognormal, Gamma)을 이용한 원단위는 상대적으로 작게 나타났다. 한편 산술평균 EMC와 유출율을 이용하여 산정된 원단위는 NIER 방법보다 원단위가 크게 산정되는 것으로 나타났다. 또한 NIER 방법의 원단위는 1995에 조사된 환경부 원단위에 비해 BOD, COD, SS는 큰 값을 T-N은 작은값을, T-P는 비슷한 값을 산정되는 것으로 나타났다.

도로청소에 의한 비점오염부하 삭감량 산정방법 연구 (A Study on Estimating Diffuse Pollution Loads Removal by Road Vacuum Cleaning)

  • 이태환;조홍래;정의상;구본경;박배경;김용석
    • 한국물환경학회지
    • /
    • 제33권2호
    • /
    • pp.123-129
    • /
    • 2017
  • The purpose of this study is to identify potential methodologies to reasonably estimate the effectiveness of road vacuum cleaning in terms of pollution loads reduction. In this context, this study proposes two empirical equations to estimate the amount of diffuse pollution loads removed by road vacuum cleaning. The proposed equations estimate the removed amount of pollution loads respectively taking into consideration of: a) the distance of road vacuum cleaning; and b) the amount of road-deposited sediment(RDS). All of the parameters in these equations were evaluated based on results of field monitoring and laboratory analyses, except for the RDS generation rate. The results of this study suggest that pollutant removal efficiency is 46.3% for $BOD_5$ and 56.4% for TP; discharge ratios for particulate and dissolved $BOD_5$ are 35.0% and 21.2%, respectively; discharge ratios for particulate and dissolved TP are 35.0% and 19.4%, respectively. Average concentrations of pollutants in RDS are $BOD_5$ 977.3 mg/kg and TP 317.6 mg/kg. Some results of a case study imply that both equations can be potentially useful if the adopted parameters are reasonably evaluated. In particular, the RDS generation rate should be evaluated based on monitoring data collected from various road conditions.

GIS를 이용한 주암호 유역의 오염부하량 산정 및 수질모의 (Calculation of Pollutant Loads and Simulation of Water Quality in Juam Lake Watershed using GIS)

  • 김철;김석규
    • 한국지리정보학회지
    • /
    • 제5권3호
    • /
    • pp.87-98
    • /
    • 2002
  • 광주 전남의 상수원인 주암호 유역에 대해 GIS를 이용하여 점오염원과 비점오염원 부하량을 산정하였으며 기 개발된 모형을 이용하여 수질을 모의하였다. 점오염원 부하량은 환경부에서 발표한 원단위(1998)를 이용하여 산정하였고, 비점오염원 부하량은 유출곡선지수를 이용한 SCS방법으로 직접유출량을 계산한 후 우리나라 유역의 특성에 맞는 토지이용별 기대평균농도 값을 이용하여 산정하였다. 수질모의는 미국환경청에서 개발한 WASP모형(2001)을 이용하였으며 대상유역을 GIS를 이용하여 경사, 방향, 고도, 토양, 토지이용과 강우량에 따라 44개의 소유역으로 구분하고, 그중 하나의 소유역에 대해 모형을 적용하였다. 모형의 결과치를 수질관측치와 비교한 결과 매우 유사함을 알 수 있었다.

  • PDF

낙동강유역 난분해성 용존 유기탄소 배출 현황 분석 (Current Status of Refractory Dissolved Organic Carbon in the Nakdong River Basin)

  • 이정훈;김정선;이재관;강임석;김상단
    • 한국물환경학회지
    • /
    • 제28권4호
    • /
    • pp.538-550
    • /
    • 2012
  • This study suggests a general methodology which is designed for assessing RDOC behavior at the catchment scale by coupling properly a series of steam flow and water quality simulation models and actual monitoring data set. The modified TANK model in which a river routing function is incorporated to the conventional one is applied to simulate the long-term daily stream flow data, and the simulated stream flow data is combined with the 7-parameter log-linear model coupled to the minimum variance unbiased estimator to simulate the long-term daily water quality (BOD, COD and TOC) loads. Finally, the regression analysis between the usually monitored water quality data (BOD, COD and TOC) and RDOC is combined with the simulated water quality data to manifest the spatio-temporal variability of RDOC flux behavior at the Korean TMDL catchment scale.