• Journal of fish pathology
• /
• v.35 no.1
• /
• pp.57-63
• /
• 2022

Vibrio parahaemolyticus and V. vulnificus are known to be infected to human via fisheries products. Therefore, food safety of fisheries products is important for public health and fish industry. This paper was conducted to know how well these human isolates can survive in olive flounder (Paralichthys olivaceus). The growth of V. parahaemolyticus and V. vulnificus showed about 50~60% reduced rates at 25℃ than at 37℃ and did not show any differences according to NaCl concentration of media except the increasing in the growth of V. vulnificus in medium containing 3% NaCl. Artificial infection of 1×10⁶ CFU/fish was carried out to confirm the sensitivity of olive flounder against V. parahaemolyticus and V. vulnificus. After 1 week from injection, no fish was dead. To evaluate nonspecific defense of olive flounder against V. parahaemolyticus and V. vulnificus, the antibacterial potency of serum and epidermal mucus were tested. The number of the vibrios exposed to serum obtained from olive flounder significantly decreased after 3 hours, and epidermal mucus showed decrease of the bacteria over than 90% until 12 hours from exposure. Phagocytosis of head kidney leucocytes of healthy olive flounder against V. parahaemolyticus and V. vulnificus showed in over 70% of leucocytes at the 2 hours. Therefore, cultured olive flounder only as vehicle for human pathogen in environmental water is well developed its antibacterial potency against human pathogens, so the viability of V. parahaemolyticus and V. vulnificus in cultured olive flounder was considered very low.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2022

With the spread of COVID-19 worldwide, non-face-to-face services have grown rapidly, but at the same time, the problem of plastic waste is getting worse. Accordingly, eco-friendly policies such as carbon neutrality and sustainable circular economy are being promoted worldwide. Due to the high demand for eco-friendly products, the packaging industry is trying to develop eco-friendly packaging materials using PLA and PBAT and create new business models. On the other hand, Ulva australis occurs in large quantities in the southern seas of Korea and off the coast of Jeju Island, causing marine environmental problems. In this study, lactic acid was produced through dilute acid pretreatment, enzymatic saccharification, and fermentation processes to utilize Ulva australis as a new alternative energy raw material. In general, seaweeds vary in carbohydrate content and sugar composition depending on the species, harvest location, and time. Seaweed is mainly composed of polysaccharides such as cellulose, alginate, mannan, and xylan, but does not contain lignin. It is difficult to expect high extraction yield of the complex polysaccharide constituting Ulva australis with only one process. However, the fusion process of dilute acid and enzymatic saccharification presented in this study can extract most of the sugars contained in Ulva australis. Therefore, the fusion process is considered to be able to expect high lactic acid production yield when a commercial-scale production process is established.

• Environmental and Resource Economics Review
• /
• v.31 no.2
• /
• pp.291-317
• /
• 2022

This study tried to analyze the factors affecting consumers' vehicle selection for the spread of eco-friendly vehicles. We used the energy census data for this purpose, and although the energy census collects useful information from a large number of samples, it has been limitedly used to create simple statistics in many cases. Based on 2,771 transport sector microdata from the 2017 Energy Census, we collected vehicle price, fuel efficiency, and number of vehicle models, which are alternative characteristic variables that change according to consumers' choice, and converted and analyzed data to enable conjoint analysis. The analysis results in two-folds. First, it was confirmed that the official fuel efficiency of a vehicle and the fuel cost, which is affected by changes in the relative price of each fuel, are important variables in selecting an eco-friendly vehicle. In order to achieve the goal of spread of eco-friendly vehicles, it is necessary to develop technologies to improve fuel efficiency and set appropriate electric rates for charging electric vehicles. Second, an increase in the number of vehicle models through the expansion of the eco-friendly car industry and market also affects consumers' choice of eco-friendly vehicles, so efforts to expand the supply of eco-friendly vehicles will be an important factor. In addition, it is also significant that this study showed that the use of the energy census can be diversified by deriving meaningful policy implications using the results of the energy census periodically conducted in the country without a separate survey.

• Membrane Journal
• /
• v.32 no.5
• /
• pp.348-356
• /
• 2022

With the development of the bio industry, membrane chromatography with a high adsorption efficiency is emerging to replace the existing column chromatography used in the downstream processes of pharmaceuticals, food, etc. In this study, through the deacetylation reaction of two commercial cellulose acetate (CA) membranes with different pore sizes, the porous regenerated cellulose (RC) supports for membrane chromatography were obtained to attach the anion exchange ligands. The adsorptive membranes for anion exchange were prepared by attaching an anion exchange ligand ([3-(methacryloylamino) propyl] trimethylammonium chloride) containing quaternary ammonium groups on the RC supports by grafting and UV polymerization. The protein adsorption capacities of the prepared membranes were obtained through both the static binding capacity (SBC) and the dynamic adsorption capacity (DBC) measurement. As a result, the membrane chromatography with the smaller the pore size, the larger the surface area showed the highest protein adsorption capacity. Membrane chromatography which was prepared by using deacetylated commercial CA support with MAPTAC ligand (i.e., RC 0.8 + MAPTAC: 43.69 mg/ml, RC 3.0 + MAPTAC: 36.33 mg/ml) showed a higher adsorption capacity compared to commercial membrane chromatography (28.38 mg/ml).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.s01
• /
• pp.86-97
• /
• 1988

Sesame(Sesamum indicum L.) is probably the most ancient oilseed crop known in the world. The seed of sesame is used in a variety of ways as food. The whole seed may be eaten raw, either roasted or parched, or fed to birds and stock. Sesame oil is used as a salad or cooking oil, in shortening, margarine and in the manufacture of soap. Minor uses are as a fixative in the perfume industry and formerly as a carrier for fatsoluble substances in pharmaceuticals such as penicillin. One of the minor constituents of sesame oil, sesamin, is used for its synergistic effect in pyrethrin insecticides, in addition of a small quantity of this substance markedly increases the effectiveness of fly sprays. The meal remaining after oil extraction can be used as and animal feed-stuff or as manure. In general sesame meal is considered to be equal to cottonseed or soybean meal as a protein supplement for livestock and poultry. It is especially high in certain amino-acids such as methionine, which is low in soybean meal, and thus can be combined with it or similar meal to form a more balanced ration. An attempt to summarize the literature review on quality improvement of sesame was made to discuss the accomplishments of the past and perspectives in the future. The reviews on quality improvement of sesame were mainly discussed in connection with the cultural practices and genetic informations in current status. The emphasis focussed on environmental variation of quality in cultural practices, such as harvest time, variety by location, climatic condition, fertilizer application, and growth regulator treatment. On the genetic variation of quality, it was discussed on variety background, mutation breeding, correlations, and inheritance of quality related characteristics. It also was discussed on relationship between quality and plant traits, storage condition or period, and seed coat color. Moreover, current research status were reviewed on some minor elements such as sesamin, oxalic acid, and trypsin inhibitor. As a results of the review, the lack of an effort to quality improvement in each utilization area was indicated as a problem area. More active efforts for the improvement of quality were also insufficient to incorporate the available genes for quality in breeding method or collection and analysis of breeding materials. Therefore, researches in the future would be recommended to emphasize on these problem areas.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.39-49
• /
• 2023

Soil contaminants measured and managed in Korea include those of geologic origin such as arsenic, cadmium, copper, lead, zinc, nickel, mercury, and fluoride. This study identifies the distribution of these contaminants using GIS modeling to analyze the spatial probability of soil contamination originating from geology. The modeling found that cadmium, copper, lead, nickel, and mercury often exceed the regulated standard by <1%. Concentrations of arsenic and zinc greatly exceeded the standard in the vicinity of mines and industrial complexes: mining and industry seemed to have substantial effects on the concentrations of these metals. Although fluoride was sampled at the lowest number of points, its frequency of exceeding the standard was the highest. No obvious source of artificial contamination has been identified, and fluoride's distribution characteristics showed continuity over a wide area, suggesting a strong correlation between geological characteristics and fluoride concentration. The highest frequencies of fluoride exceeding the standard were in Jurassic granite (40.00%) and Precambrian banded gneiss (34.12%). As these rocks contributed to the formation of soil through their weathering, high fluoride concentrations can be expected in soil in areas where these rocks are distributed.

• Journal of Internet Computing and Services
• /
• v.24 no.1
• /
• pp.71-86
• /
• 2023

The purpose of this exploratory study is to compare the differences in public perceptual characteristics of Korean and Chinese societies regarding the metaverse using big data analysis. Due to the environmental impact of the COVID-19 pandemic, technological progress, and the expansion of new consumer bases such as generation Z and Alpha, the world's interest in the metaverse is drawing attention, and related academic studies have been also in full swing from 2021. In particular, Korea and China have emerged as major leading countries in the metaverse industry. It is a timely research question to discover the difference in social awareness using big data accumulated in both countries at a time when the amount of mentions on the metaverse has skyrocketed. The analysis technique identifies the importance of key words by analyzing word frequency, N-gram, and TF-IDF of clean data through text mining analysis, and analyzes the density and centrality of semantic networks to determine the strength of connection between words and their semantic relevance. Python 3.9 Anaconda data science platform 3 and Textom 6 versions were used, and UCINET 6.759 analysis and visualization were performed for semantic network analysis and structural CONCOR analysis. As a result, four blocks, each of which are similar word groups, were driven. These blocks represent different perspectives that reflect the types of social perceptions of the metaverse in both countries. Studies on the metaverse are increasing, but studies on comparative research approaches between countries from a cross-cultural aspect have not yet been conducted. At this point, as a preceding study, this study will be able to provide theoretical grounds and meaningful insights to future studies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.5
• /
• pp.639-650
• /
• 2023

Economic development has resulted in the concentration of population and industry in the metropolitan area. Additionally, the Republic of Korea is experiencing this phenomenon, with more than half of the population living in the Seoul capital area. To alleviate this concentration of population, the Korean government implemented the new town development policy. Unfortunately, this has led to an increase in the commuting population, causing an imbalance in transportation services due to financial and policy differences in each region. This paper analyzes the level of user satisfaction with mega commuting in three aspects: mobility, accessibility, and connectivity. To objectively assess the level of user satisfaction, which is qualitative data, the Rasch Model is used to analyze the collinearity of user data. The results indicate that the level of user satisfaction differs by region, and service satisfaction with mobility is lower than that with accessibility and connectivity. Therefore, prior to the introduction of new town policies, it is necessary to develop metropolitan transportation infrastructure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.255-258
• /
• 2022

As environmental pollution continues, attention on renewable energy is on the constant rise in recent days. Although various kinds of renewable energy such as solar, wind power and biomass energy have been generated in Jeju, opening and analyzing cases on related data seem insufficient. Therefore, this study is being conducted to deduce the variables which have high relation with solar panel&s output and to understand machine learning methods that can be applied to solar power generation data by utilizing Kaggle platform, which is actively used by a number of scientists. Then, it is planned to propose a form of solar power generation dataset by researching machine learning methods that could be applied to the data. To be specific, analyzing solar power generation data with the Kaggle platform, this study will provide complements on gathering solar power data in Jeju. This study is anticipated to be utilized on data analysis for developing the solar power industry in Jeju. That is, this study is expected to reveal the room for improvement inherent in existing open datasets in Jeju, so that they could be constructed in a suitable form for machine learning for AI analytics. Through this process, a method to increase efficiency of solar power generation is anticipated to be prepared.

• Clean Technology
• /
• v.16 no.2
• /
• pp.103-116
• /
• 2010

It has been reported that the LCD panel market in the FPD industry is become growing and its panel size and production capacity are increasing, and its manufacturing technique is improved every year. FPD manufacturing process requires high cleanliness in its overall process. Especially, FPD cleaning process which accounts for 30~40% of total manufacturing process is very important in its technological and productivity aspects. It is difficult to remove residual liquid-crystal in the fine gap after liquid-crystal injection process in the cell. In this study, aqueous cleaning agents with excellent cleaning, rinsing, and penetrating abilities, but minimum ion content for LCD panel were formulated through mixing glycol ether-type and glycol dimethyl ether-type solvents and nonionic surfactants which are widely used as raw materials for alternative cleaning agents because of environmental regulation at home and abroad. And the formulated cleaning agents were applied to clean FPD liquid crystal after its injection in the cell. Physical properties, cleaning efficiencies, and rinsabilities of the formulated cleaning agents with different combination ratios of solvents, surfactants and additives were measured. As experimental results, the formulated cleaning agents showed higher wetting indices and cloud point than the traditional commercial cleaning agent. And it was found that cleaning efficiencies of the formulated cleaning agents were influenced by the structure of main solvents in them and the types of liquid crystal as soil for cleaning. The best cleaning agents among the formulated cleaning agents showed similar cleaning efficiencies and better rinsabilities compared to the conventional cleaning agent.