• Journal of environmental and Sanitary engineering
• /
• v.24 no.1
• /
• pp.25-32
• /
• 2009

The analyzed results of the heavy metal concentration of air and soil at the D iron-manufacturing company area were as follows; The concentration of $PM_{2.5}$ in the case area exceeded the air standard level in 3 seasons except summer. The $PM_{10}$ level was similar to the standard level, which was similar to the standard level, which was $50{\mu}g/m^3$. The Pb concentration of air in the case area was $0.13{\mu}g/m^3$, which was slightly higher than $0.11{\mu}g/m^3$ in the control area. The concentration of Cd and Cr were higher in the control area. The heavy metal (Pb) concentration of soil in the case area was $10.7{\mu}g/m^3$, which was higher than that of the control area. For these results, it is necessary for the D iron-manufacturing company area to consider a counter plan for dusts and are duction plan for the heavy metal (Pb).

• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.189-193
• /
• 1992

The success of 3M's worldwide Pollution Prevention Pays (3P) Program convinced 3M's top management that the program should be expanded into a comprehensive environmental management system called 3P Plus. The emphasize of the 3P Plus program is to continually minimize the environmental impact of 3M processes, products, and operations to include energy management, resource recovery, and other initiatives. 3M's experience with the 3P and 3P Plus programs will be described. 3M's experience can serve as a model for other multi-national companies interested in sustainable development and economic growth with environmental protection.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2002.04a
• /
• pp.41-47
• /
• 2002

Adverse environmental conditions such as drought, high salt and cold/freezing are major factors that reduces crop productivity worldwide. According to a survey, $50-80\%$ of the maximum potential yield is lost by these 'environmental or abiotic stresses', which is approximately ten times higher than the loss by biotic stresses. Thus, Improving stress-tolerance of crop plants is an important way to improve agricultural productivity. In order to develop such stress-tolerant crop plants, we set out to identify key stress signaling components that can be used to develop commercially viable crop varieties with enhanced stress tolerance. Our primary focus so far has been on the identification of transcription factors that regulate stress responsive gene expression, especially those involved in ABA-mediated stress response. Be sessile, plants have the unique capability to adapt themselves to the abiotic stresses. This adaptive capability is largely dependent on the plant hormone abscisic acid (ABA), whose level increases under various stress conditions, triggering adaptive response. Central to the response is ABA-regulated gene expression, which ultimately leads to physiological changes at the whole plant level. Thus, once identified, it would be possible to enhance stress tolerance of crop plants by manipulating the expression of the factors that mediate ABA-dependent stress response. Here, we present our work on the isolation and functional characterization of the transcription factors.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2002.04b
• /
• pp.41-47
• /
• 2002

Adverse environmental conditions such as drought, high salt and cold/freezing are major factors that reduces crop productivity worldwide. According to a survey, 50-80% of the maximum potential yield is lost by these 'environmental or abiotic stresses', which is approximately ten times higher than the loss by biotic stresses. Thus, improving stress-tolerance of crop plants is an important way to improve agricultural productivity. In order to develop such stress-tolerant crop plants, we set out to identify key stress signaling components that can be used to develop commercially viable crop varieties with enhanced stress tolerance. Our primary focus so far has been on the identification of transcription factors that regulate stress responsive gene expression, especially those involved in ABA-mediated stress response. Be sessile, plants have the unique capability to adapt themselves to the abiotic stresses. This adaptive capability is largely dependent on the plant hormone abscisic acid (ABA), whose level increases under various stress conditions, triggering adaptive response. Central to the response is ABA-regulated gene expression, which ultimately leads to physiological changes at the whole plant level. Thus, once identified, it would be possible to enhance stress tolerance of crop plants by manipulating the expression of the factors that mediate ABA-dependent stress response. Here, we present our work on the isolation and functional characterization of the transcription factors.

• Annals of Occupational and Environmental Medicine
• /
• v.35
• /
• pp.45.1-45.3
• /
• 2023

• Structural Engineering and Mechanics
• /
• v.26 no.3
• /
• pp.277-295
• /
• 2007

3-D wall panels are used in construction of exterior and interior bearing and non-load bearing walls and floors of building of all types of construction. Fast construction, thermal insulation, reduced labor expense and weight saving are the most well pronounced advantage of such precast system. When the structural performance is concerned, the main disadvantage of 3D panel, when used as floor slab, is their brittleness in flexure. The current study focuses on upgrading ductility and load carrying capacity of 3D slabs in two different ways; using additional tension reinforcement, and inserting a longitudinal concentrated beam. The research is carried on both experimentally and numerically. The structural performance in terms of load carrying capacity and flexural ductility are discussed in details. The obtained results could give better understanding and design consideration of such prefabricated system.

• Journal of Environmental Science International
• /
• v.28 no.2
• /
• pp.203-209
• /
• 2019

Organic wastewater generated from polyester manufacturing processes was selected from H company to investigate the feasibility of anaerobic digestion that produces gases including methane. Bio Methane Potential (BMP) tests were conducted to measure the gas production and methane concentration for 7 process wastewater and 2 kinds of sludges from the H company. Also, along with monitoring pH and alkalinity during the anaerobic digestion process, the concentrations of COD and 1,4-dioxane were measured with 4 different operating conditions for N Emulsion (NE) and Ethylene Glycol (EG) wastewater. The BMP tests showed that 65% of methane was produced from NE and EG wastewater. This suggests that the organic wastewater from H company can be effectively treated by an anaerobic digester by which more than 90% of COD was removed.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.2
• /
• pp.189-195
• /
• 2008

We developed emission factors for alternative fuels used in cement industries in Korea and also estimated reduction in emissions of greenhouse gas (GHG) by the use of alternative fuels. Emission factors for GHG of waste tire, waste plastic, waste oil and RDF were estimated to be about 89, 78, 77 and 95 ton $CO_2$/TJ respectively. When compared with previous studies, most of the results showed similar trends. The calorific value estimation and elemental analysis for energy source were implemented in order to estimate the exact emission factors and the reduction of GHG emissions using alternative fuel. In the case of 'A' company, $CO_2$ emission from alternative fuels was about 4% lower than that of bituminous coal only. Also in case of company 'B', $CO_2$ emission from alternative fuels was about 1.4% lower than that of only bituminous coal. In Germany and Japan, alternative fuel is not regarded to be fuel consumption in cement industry. When applying this rule, the emission reductions were about 4.3% for company 'A' and 6.3% for company 'B'. The results of this study may be considered as a useful information for developing strategies in reducing GHG emissions.

• Korean Journal of Community Nutrition
• /
• v.11 no.4
• /
• pp.502-511
• /
• 2006

The purposes of this study were to measure job satisfaction levels of dietitians engaged a in contract food service management company, and to examine the impacts of personal characteristics and organizational characteristics on the job satisfaction of dietitians. The questionnaires developed for this study were distributed to 230 dietitians of contract food service management companies in the Seoul and Gyeonggi areas, and a total of 187 (81.3%) questionnaires were used for analysis. Statistical analyses were completed using SPSS (Win 11.5) for descriptive analysis, correlation analysis, t-test and ANOVA. The average job satisfaction score of the dietitians was 2.83, which is lower than "not satisfied" and "not dissatisfied" (3), "Marital status" (p < 0.001), "payroll per year" (p < 0.001), "age" (p < 0.05) and "work experience as a dietitians" (p < 0.05) had significant effects on job satisfaction of work and environmental factors. "Operating group" (p < 0.05), "type of menu" and "type of service" also affected the job satisfaction. Overall, it is important that managers of contract food service management companies establish specified human resource management strategies with understandings of the characteristics of their dietitians and companies to enhance the job satisfaction of dietitians, and to achieve their managerial goals.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.731-738
• /
• 2020

Though their activities, companies have an impact on environmental problems and nature conservation. The accounting sector can play a role in environmental conservation efforts related to environmental costs, and the implemention of the Corporate Sustainability Management System (CSMS) could be a key factor that can improve the company's financial performance. This study aims to determine how green accounting through the application of CSMS can improve the financial performance of manufacturing companies in Indonesia, a developing country. The sampling method used was purposive sampling, while the research sample consisted of 38 companies that had followed PROPER and were indexed on the IDX. Data were analyzed using the Structural Equation Modeling (SEM) method known as the Partial Least Square (PLS) method. The results of this study indicate that manufacturing companies in Indonesia are able to implement green accounting by allocating appropriate environmental costs by earmarking a portion to carry CSMS implementation so as to improve financial performance. People in Indonesia consider that manufacturing companies that have good company rankings in the evaluation program for company performance ratings in environmental management run by the Indonesian Ministry of Environment are in a position to generate customer loyalty, especially in financial performance.