• 산업경영시스템학회지
• /
• 제23권59호
• /
• pp.105-118
• /
• 2000

The rise in population and the increase of urbanization and industrial growth has resulted in an ever-increasing volume of municipal solid waste that must be regularly collected, transported, and ultimately disposed of. Therefore, over the last decade the public, commercial and legislative awareness of environmental issues has been increased dramatically on earth particularly some industrial countries which has a shortage of landfill capacity. A quality, cost and delivery lead-time are usually considered as the competitive factors for each industry. However, the concepts of environmental issue are emerging common terms and concerns more seriously. More attention than ever is being focused on the recycling and source reduction techniques to reduce the total volume of waste. Unfortunately, however, a shortage of landfill capacity and increasing disposal cost requests a fundamental solution about the environmental issue. That is the remanufacturing which allow manufacturers to minimize waste, production cost and to turn end-of-life product into a profitable product. The objectives of this research were to growth the remanufacturing system by suggesting issues and implementation methods for the remanufacturing. In order to accomplish these objectives, we introduced backgrounds of appearance and benefits of the remanufacturing.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1354-1359
• /
• 2009

Ground anchor should not be used in soft clay, because anchor resistance can not be guaranteed. However, there is a way to increase the capacity of anchors. The anchor is an underreamed anchor by using high voltage electric discharge energy. In this study, a series of field test were carried out in order to find ultimate load of underreamed anchors in weathered soil at the new apartment construction site located in Inchon, Korea. Data were analyzed in order to define a relation between ultimate load and the number of electric discharge.

• Structural Engineering and Mechanics
• /
• 제26권3호
• /
• pp.277-295
• /
• 2007

3-D wall panels are used in construction of exterior and interior bearing and non-load bearing walls and floors of building of all types of construction. Fast construction, thermal insulation, reduced labor expense and weight saving are the most well pronounced advantage of such precast system. When the structural performance is concerned, the main disadvantage of 3D panel, when used as floor slab, is their brittleness in flexure. The current study focuses on upgrading ductility and load carrying capacity of 3D slabs in two different ways; using additional tension reinforcement, and inserting a longitudinal concentrated beam. The research is carried on both experimentally and numerically. The structural performance in terms of load carrying capacity and flexural ductility are discussed in details. The obtained results could give better understanding and design consideration of such prefabricated system.

• 한국환경과학회지
• /
• 제16권6호
• /
• pp.689-698
• /
• 2007

Mesoporous silicas for heavy metals adsorption were prepared by co-condensation of surfactant as a template and Ludox HS-40 as a silica precursor. Various mesoporous silicas with the introduction of chelating ligands (mercaptopropyl and aminopropyl groups) were synthesized to remove heavy metal ions from aqueous solutions. The surface modification was conducted with a co-condensation process using the sequential or simultaneous addition of mesoporous silica and high concentration of the organosilane(3-mercaptopropyltrimethoxysilane and 3-aminopropyltriethoxysilane). These materials have been characterized by elemental analysis, XRD, SEM and TEM analysis. Adsorbents synthesized with 3-mercaptopropyltrimethoxysilane and 3-aminopropyltriethoxysilane shows a high loading capacity for Hg(II), Pb(II), Cd(II) and anion Cr(VI). Especially the one synthesized with a mercaptopropyl function has the highest adsorption capacity for Hg(II) and Cd(II).

• Journal of Smart Tourism
• /
• 제2권3호
• /
• pp.5-15
• /
• 2022

As the utilization of technology in the tourism field becomes familiar, it greatly impacts people's tourism activities. These changes could also affect the behavior of tourists during the pandemic. To investigate consumers' adaptation to the self-service technology (SST) environment during the coronavirus disease of 2019 (COVID-19) pandemic, we adopted a model of absorptive capacity as the main framework for empirical research. To track the social effects of COVID-19, consumers' behavioral intentions for four different points in time are collected. The analysis was conducted using latent growth and structural equation modeling. We set the organizational and environmental characteristics as the first step of the model, with assimilation and trust as a middle step. Intention to use a kiosk is placed at the final step as an exploit. Findings indicate that organizational characteristics and environmental characteristics positively influenced assimilation and trust, except for environmental characteristics. Consumers' assimilation in SST encourages immediate intention to use a kiosk. Consumers' trust in kiosks positively impacts both immediate and continuance intention to use a kiosk during COVID-19.

• 유기물자원화
• /
• 제4권2호
• /
• pp.55-62
• /
• 1996

본 연구에서는 중금속에 대한 지렁이 분변토의 흡착특성을 활성탄과 비교함으로서 중금속 함유폐수처리를 위한 경제적인 흡착제로서 활용가능성을 평가하기 위한 연구를 수행하였다. 지렁이를 이용한 퇴비화에 사용된 슬러지는 피혁슬러지와 우분슬러지를 7:3으로 혼합하여 부숙시킨 것을 사용하였다. 분변토의 물리화학적 특성을 평가하기 위한 용출실험으로부터 분변토는 약간의 pH의 완충능력과 55.1me/100g의 양이온교환능력을 가지는 것으로 평가되었다. 분변토의 중금속에 대한 흡착평형시간은 90분 이내로서 활성탄과 큰 차이가 없었으며, Pb, Cu, Cd, Cr, Zn의 제거효율은 활성탄이 각각 98%, 93%, 94%, 89%, 82%, 분변토는 95%, 90%, 88%, 80%, 66%로 평가되었다. 흡착제 양의 변화에 따른 흡착특성을 Freundlich 등온 흡착식으로 해석한 결과 1/n값은 분변토의 경우 0.28~0.74로서 활성탄의 0.29~0.56에 근접하는 결과를 얻을 수 있었으며, 이 결과로부터 분변토를 경제적인 중금속흡착제로 사용 가능한 것으로 평가되었다. 또한, 분변토의 중금속 성분별 흡착선호성향을 활성탄과 비교 분석한 결과 분변토는 Pb>Cu>Cd>Cr>Zn의 순이었으며, 활성탄은 Pb>Cd>Cu>Cr>Zn의 순이었다.

• 한국환경과학회지
• /
• 제8권5호
• /
• pp.575-586
• /
• 1999

From the environmental aspects, primary productivity of phytoplankton plays the most improtant role in enhancement of marine culture oyster production. This study may be divided into two branches; one is estimation of maximum oyster meat production per unit facility(Carrying Capacity) under the present enviromental conditions in Kamak Bay, the other is improvement of carrying from increase of primary productivity by changing the environmental conditions that cause not ot form an unfavorable environment such as the formation of oxygen deficient water mass using the eco-hydrodynamic model. By simulation of three-dimensional hydrdynamic model and ecosystem model, the comparison between observed and computed data showed good agreement. The results of sensitivity analysis showed that phytoplankton maximum growth rate was the most important parameter for phytoplankton and dissolved oxygen. The estimation of mean primary productivity of Wonpo, Kamak, Pyongsa, and Kunnae culture grounds in Kamak Bay during culturing period were 3.73gC/$m^2$/d, 2.12gC/$m^2$/d, 1.98gC/$m^2$/d, and 1.26gC/$m^2$/d, respectively. Under condition not ot form the oxygen deficient water mass, four times increasing of pollutants loading as much as the present loading from river increased mean primary productivity of whole culture grounds to 4.02gC/$m^2$/d. Sediment N, P fluxes that allowed for 35% increasing from the present conditions increased mean primary productivity of whole culture grounds to 3.65gC/$m^2$/d. Finally, ten times increasing of boundary loadings from the present conditions increased mean primary productivity of whole culture grounds to 3.95gC/$m^2$/d. The maximum oyster meat production per year and that of unit facility in actual oyster culture grounds under the present conditions were 6,929ton and 0.93ton, respectively. This 0.93ton/unit facility is considered to be the carrying capacity in study area, and if the primary productivity is increased by changing the environmental conditions, oyster production can be increased.

• Journal of Microbiology and Biotechnology
• /
• 제18권5호
• /
• pp.958-963
• /
• 2008

A series of experiments were conducted to assess the effectiveness of rhizobacteria containing 1-aminocyclopropane-1-carboxylate (ACC) deaminase for growth promotion of peas under drought conditions. Ten rhizobacteria isolated from the rhizosphere of different crops (peas, wheat, and maize) were screened for their growth promoting ability in peas under axenic condition. Three rhizobacterial isolates, Pseudomonas fluorescens biotype G (ACC-5), P. fluorescens (ACC-14), and P. putida biotype A (Q-7), were selected for pot trial on the basis of their source, ACC deaminase activity, root colonization, and growth promoting activity under axenic conditions. Inoculated and uninoculated (control) seeds of pea cultivar 2000 were sown in pots (4 seeds/pot) at different soil moisture levels (25, 50, 75, and 100% of field capacity). Results revealed that decreasing the soil moisture levels from 100 to 25% of field capacity significantly decreased the growth of peas. However, inoculation of peas with rhizobacteria containing ACC deaminase significantly decreased the "drought stress imposed effects" on growth of peas, although with variable efficacy at different moisture levels. At the lowest soil moisture level (25% field capacity), rhizobacterial isolate Pseudomonas fluorescens biotype G (ACC-5) was found to be more promising compared with the other isolates, as it caused maximum increases in fresh weight, dry weight, root length, shoot length, number of leaves per plant, and water use efficiency on fresh and dry weight basis (45, 150, 92, 45, 140, 46, and 147%, respectively) compared with respective uninoculated controls. It is highly likely that rhizobacteria containing ACC deaminase might have decreased the drought-stress induced ethylene in inoculated plants, which resulted in better growth of plants even at low moisture levels. Therefore, inoculation with rhizobacteria containing ACC deaminase could be helpful in eliminating the inhibitory effects of drought stress on the growth of peas.

• Environmental Engineering Research
• /
• 제23권3호
• /
• pp.330-338
• /
• 2018

This study investigated the possibility of using potassium titanate oxide ($K_2Ti_4O_9$) and acrylic acid-grafted polypropylene fabric (PP-g-AA) as adsorbents capable of removing strontium from aqueous solutions. $K_2Ti_4O_9$ showed the highest rate of strontium removal in the weak alkaline range, while the PP-g-AA increased strontium removal in the neutral range. Moreover, the adsorption capacity of the $K_2Ti_4O_9$ was not affected by the coexistence of K and Na ions, while the adsorption capacity decreased when Ca and Mg ions were present at the same concentration as that of strontium. When coexisted at the same concentration as strontium, Na, K, Ca, and Mg ions strongly reduced the adsorption capacity of the PP-g-AA. The results also indicated that the adsorption of strontium on $K_2Ti_4O_9$ was consistent with both the Langmuir and Freundlich adsorption isotherms. In contrast, the adsorption of strontium on the PP-g-AA was more consistent with the Langmuir isotherm model. Moreover, the adsorption equilibrium time of $K_2Ti_4O_9$ was generally 12 h, while that of the PP-g-AA was 5 h, indicating that the adsorption rates were consistent with the pseudo-second order kinetics model. $K_2Ti_4O_9$ and the PP-g-AA could be regenerated by simple washing with 0.5 N HCl.

• 자원환경지질
• /
• 제43권4호
• /
• pp.359-369
• /
• 2010

본 연구는 서반부지역(북서부 소지역, 서부 소지역, 남서부 소지역)에 광역상수도용 수원지 개발을 위하여 굴착된 지하수공을 중심으로 대수층 체계를 분류하고, 수리지질 특성을 규명하였다. 북서부 소지역의 대수층 체계는 상부 투수층-상부 저투수층-하부 투수층-하부 저투수층으로 구성되고, 서부 소지역과 남서부 소지역의 대수층 체계는 상부 저투수층-투수층-하부 저투수층으로 구성된다. 투수량계수와 비양수량은 북서부 소지역, 서부 소지역, 남서부 소지역의 순으로 낮아진다. 비양수량과 응회암의 산출 고도는 비교적 높은 반비례 관계(상관계수 -0.848)를 보이며, 이는 응회암이 대수층의 밑바닥 역할을 하기 때문으로 판단된다. 3개 소지역에 대해서 2004년 수마트라 지진에 의한 지하수위 변동 분석결과, 북서부 소지역에서 평균 23.74 cm로 가장 크며, 서부 소지역에서는 평균 9.48 cm이고, 남서부 소지역 에서는 지하수위 변동이 나타나지 않았다. 그리고 지진에 의한 지하수위 변화는 투수량계수 및 비양수량과 정비례관계를 가지는 것으로 나타났다.