• 한국지반환경공학회 논문집
• /
• 제9권5호
• /
• pp.45-52
• /
• 2008

본 연구에서는 지반 및 구조물의 문제점을 이상화 하는데 필요한 응용기술을 개발하기 위해 공개되어 있는 소프트웨어 즉 도스용 프로그램을 윈도우상에서 OpenSees 말뚝의 정적 지지지력과 침하를 분석할 수 있도록 하여 윈도우상에서 사용자가 편리하게 전 처리와 후 처리 및 경제조건 처리가 가능하도록 OpenSees프로그램을 개선하였다. 본 연구에 사용된 지지력 분석은 유한요소 해석과 합성된 하중전이함수에 근거한 수치해석방법이다. 본 연구에서는 흙-말뚝의 상호작용에 의한 마찰력과 선단 지지력을 각각 모델링하기 위해 경험적인 비선형 T-z과 Q-z곡선에 의한 하중전이법을 이용하여 하중재하에 따른 침하조건에서의 흙-말뚝의 반응을 나타내었다. 본 연구에서 예측한 정적 지지력과 침하량은 문헌에 의한 정적재하시험 결과와 잘 일치하는 것으로 나타나 유용하게 활용될 수 있을 것으로 판단된다.

• 한국환경과학회지
• /
• 제10권4호
• /
• pp.269-273
• /
• 2001

Biosorption of Pb was evaluated for plants, Persicaria chinensis, Oenanthe javanica and Salvinia natnas. The adsorption equilibrium was reached in about 1hr for Pb and the highest adsorption capacity was 150mg Pb/g biomass at S.natans. Pb adsorption process showed a pseudo second order irreversible reaction. The highest initial adsorption rate was 2000mg pb/g biomass/hr at O.javanica. In spite of pH variation, Pb adsorption capacity by was selection, Pb was selectively adsorved. The selectivity of mixture solution showed the adsorption order of Pb>Cu>Cr>Cd. The Pb adsorption capacity of P. chinensis pretreated with NaOH was increased by 30% in comparison with that of no treatment.

• Structural Engineering and Mechanics
• /
• 제11권3호
• /
• pp.301-314
• /
• 2001

The purpose of this experimental study is to investigate the damage mechanism due to shear-fatigue behavior of high-strength reinforced concrete beams under repeated loading. The relationship between the number of cycles and the deflection or strain, the crack growths and modes of failure with the increase of number of cycles, fatigue strength, and S-N curve were observed through a fatigue test. Based on the fatigue test results, high-strength reinforced concrete beams failed at 57-66 percent of static ultimate strength for 2 million cycles. The fatigue strength at 2 million cycles from S-N curves was shown as about 60 percent of static ultimate strength. Compared to normal-strength reinforced concrete beams, fatigue capacity of high-strength reinforced concrete beams was similar to or lower than fatigue capacity of normal-strength reinforced concrete beams. Fatigue capacity of normal-strength reinforced concrete beams improved by over 60 percent.

• 환경위생공학
• /
• 제10권1호
• /
• pp.132-141
• /
• 1995

The objectives of this study was to find the effect of zinc salt treated with coconut activated carbon and the effect of humic substance. The bottle- Point technique was used in determining the Freundlich isotherm equation. The adsorptive capacity of granular activated carbon was reduced when humic substance are present. Coconut activated carbon was coated with 0.0001 N zinc chloride decreased the BET surface area but increased the adsorptive capacity more than coconut activated carbon not coated with zinc chloride. The adsorptive capacity of TCE in coconut activated carbon coated with higher concentration of zinc chloride was reduced but increased in the solution containing humic substance when the coconut activated carbon was coated with 0.01 N- zinc chloride. The zinc salt coated with coconut activated carbon did not Increase the adsorptive velocity of coconut activated carbon.

• 한국환경과학회지
• /
• 제12권6호
• /
• pp.583-591
• /
• 2003

The research on potential energy was conducted to conserve the high-exergy energy like primary energy and utilize waste heat from sewage. From the Point of view in using the waste heat, the energy Potential of waste water from the model house was simulated. From the results, when the heated water was supplied to the model house side in order to put unused energy to Practice use, heated water had higher energy Potential than unheated water, which was due to the discharge of most of unused energy. The possessing heat capacity of sewage from heated water was increased to 40-70 percents in comparison with that from the unheated water. Therefore, it can be used as energy source for improving coefficient of performance of heat pumps. By adopting the multiple heat pump into a model house, It showed that the possessing heat capacity of sewage was reduced. It was also found that the heat was recovered as energy source fur multiple heat pump in a model house.

• 한국토양비료학회지
• /
• 제47권5호
• /
• pp.340-344
• /
• 2014

Compost and gypsum can be used to ameliorate soil physicochemical properties in reclaimed tidal lands as an organic and inorganic amendment, respectively. To evaluate effects of compost and gypsum on soil water movement and retention as a soil physical property, we measured the soil's saturated hydraulic conductivity and field capacity after treating the soil collected in a reclaimed tidal land with compost and gypsum. Saturated hydraulic conductivity of soil increased when compost was applied at the conventional application rate of $30Mg\;ha^{-1}$. However, the further application of compost insignificantly (P > 0.05) increased saturated hydraulic conductivity. On the other hand, additional gypsum application significantly increased soil saturated hydraulic conductivity while it decreased soil field capacity, implying the possible effect of gypsum on flocculating soil colloidal particles. The results in this study suggested that compost and gypsum can be used to improve hydrological properties of reclaimed tidal lands through increasing soil water retention and movement, respectively.

• 환경위생공학
• /
• 제15권3호
• /
• pp.44-49
• /
• 2000

The purpose of this research is to evaluate the adsorption capacity of casts for heavy metals. The casts were excreted by earthworm, Lumbricus rubellus, after having eaten the paper sludge. Various batch experiments on adsorption were performed to compare cast and activated carbon. The pH increase in solution due to extractives from cast was 1.3 and the cation exchange capacity which implies adsorption capacity for solubles is greater on activated carbon than on cast. According to the results of batch experiment, the removal rates of Pb, Cu, Cr, Zn using the activated carbon and casts as adsorbent were 98%, 93%, 94%, 89%, 82% and 95%, 90%, 88%,80%, 66%, respectivity, and this removal were achived less than 90 minutes. It can be said that casts is so good adsorbent as activated carbon is, although adsorption carbon was found to be some large than those of casts through Freundlich isotherm applied for adsorption of soluble. As a result on the experiment of isothermic adsorption from the mixed component solution in the batch, the order of preferable elements in heavy metal adsorption was found to be Pb＞Cd＞Cu＞Cr＞Zn on activated carbon, respectively.

• Environmental Engineering Research
• /
• 제20권3호
• /
• pp.290-297
• /
• 2015

This paper presents the evaluation of the impact of climate change on water resources and yield capacity of Asa and Kampe reservoirs. Trend analysis of mean temperature, runoff, rainfall and evapotranspiration was carried out using Mann Kendall and Sen's slope, while runoff was modeled as a function of temperature, rainfall and evapotranspiration using Artificial Neural Networks (ANN). Rainfall and runoff exhibited positive trends at the two dam sites and their upstream while forecasted ten-year runoff displayed increasing positive trend which indicates high reservoir inflow. The reservoir yield capacity estimated with the ANN forecasted runoff was higher by about 38% and 17% compared to that obtained with historical runoff at Asa and Kampe respectively. This is an indication that there is tendency for water resources of the reservoir to increase and thus more water will be available for water supply and irrigation to ensure food security.

• 한국환경과학회지
• /
• 제14권10호
• /
• pp.973-978
• /
• 2005

Biodegradable oil gelling agent was prepared, and their oil absorption capacities using light oil, lubricant oil and corn oil were investigated. The result showed that the oil absorption capacity was depended on the amount of surfactant and starch added, and was increased in the order of light oil, lubricant oil and corn oil. Also, the oil-absorption capacity was saturated within 30 min at $18^{\circ}C$. The biodegradability of the prepared biodegradable oil gelling agent was also studied by determination of reduced sugar produced after enzymatic hydrolysis. Their surface morphologies and thermal properties of the prepared biodegradable oil gelling agent were observed by scanning electron microscopy (SEM) and thermogravimetric analysis (TGA), respectively.

• 한국환경보건학회지
• /
• 제29권3호
• /
• pp.50-58
• /
• 2003

Removal of heavy metal ions (Cd$^{2+}$, Cr$^{3+}$, Cu$^{2+}$, Pb$^{2+}$) by several chitosans was studied and the molecular weight of chitosan was investigated in order to examine the effect of autoclaving. Chitosan were divided into 3 groups (A type, controlled chitosan; B type, autoclaved for 15 min; C type, autoclaved for 60 min). The heavy metal removal capacity and rate of B type chitosan were higher than those of A type and B type chitosan. The molecular weight of chitosan was decreased by the increase of autoclaving time. Therefore, the heavy metal capacity was not well correlated to the molecular weight. Freundlich and Langmuir isotherm was determined from the experimental results of equilibrium adsorption for individual heavy metal ions on chitosan. Langmuir isotherm was well fitted to this experimental data. The heavy metal removal capacity of B type chitosan was in the order of Pb$^{2+}$ > Cu$^{2+}$ > Cd$^{2+}$> Cr$^{3+}$.3+/.$.3+/.