• 제목/요약/키워드: Environmental Stress value

검색결과 287건 처리시간 0.023초

반복식 평판재하시험을 이용한 노상토의 현장 변형계수 평가 (Evaluation of Field Nonlinear Modulus of Subgrnde Soils Using Repetitive Static Plate Bearing Load Test)

  • 김동수;서원석;권기철
    • 한국지반공학회논문집
    • /
    • 제21권6호
    • /
    • pp.67-79
    • /
    • 2005
  • 현장 평판재하시험은 평판에 작용하는 하중과 변위를 동시에 측정하기 때문에 역학적인 특성치 결정의 가능성이 높은 시험방법이다. 그러나 지금까지 평판재하시험으로부터 추정한 탄성계수는 일정 변위를 유발한 하중강도하에서의 지지력계수로부터 구한 하나의 상수값으로서, 이는 포장구조에서 노상이 경험하는 사용하중 단계에서의 대표적인 변형특성치로 결정하기에는 어려움이 있다. 포장설계시 사용되는 회복탄성계수 개념의 변형계수는 중간변형률$(0.01\%\sim0.1\%)$ 영역에서의 값으로서, 현장 노상토의 경우에도 이와 같은 변형률 범위에서의 변형계수를 평가하는 것이 중요하다. 본 논문에서는 노상 현장에서 반복평판재하시험을 이용하여 중간변형률 영역에서의 변형계수를 산정하는 방법을 제안하였다. 이의 신뢰성을 검토하기 위하여 현장에서 크로스홀 시험과 실내에서 공진주시험을 수행하여 전체변형률 영역에서의 현장의 변형특성을 평가하여 평판재하시험 결과와 비교하였다. 두 시험결과 사이의 응력상태를 고려하면 변형률에 따른 변형계수의 값과 경향이 비교적 일치하였고, 제안된 반복식 평판재하시험을통해 현장변형계수의 평가가 가능함을 알 수 있었다.

콘크리트 회전형 기둥의 비선형 횡방향 거동 및 단면응력 분포 분석 (Nonlinear Lateral Behavior and Cross-Sectional Stress Distribution of Concrete Rocking Columns)

  • 노화성;황웅익;이후석;이종세
    • 콘크리트학회논문집
    • /
    • 제24권3호
    • /
    • pp.285-292
    • /
    • 2012
  • 일반적으로 콘크리트 구조물은 보와 기둥이 서로 강결되어 있으며, 이러한 경우 강진에 의해 연결부에서 심각한 손상이 발생할 수 있다. 이를 저감시키면서 내진성능을 향상시키기 위한 다양한 연결 형태가 연구되어지고 있다. 그 한 예로 연결부에서의 회전을 허용하는 연결형식이 있으며 보나 기둥, 그리고 전단벽에 응용되고 있다. 이러한 회전형 구조요소들은 횡방향 거동시 비선형 힘-변위 관계를 나타내는데, 그 원인은 연결부의 회전으로 인한 접촉면의 깊이(contact depth)가 줄어듦과 동시에 요소의 각 단면에서의 응력이 비선형적으로 분포되는 탄성힌지 구간이 존재하기 때문이다. 이 연구에서는 축방향 하중(공칭강도의 5%와 10%)과 경계조건(양단구속 형식, 캔틸레버 형식), 세장비(L/d = 5, 7, 10) 등의 변수를 고려한 유한요소해석을 통해 회전형 기둥의 탄성힌지 구간 또는 길이를 분석하였다. 그 결과 이 세가지 변수는 탄성힌지길이 변화에는 직접적인 영향을 주지 않았으며 다만 접촉면의 깊이에 의해 지배됨을 알 수 있었다. 이 탄성힌지길이는 opening state부터 발생하기 시작하여 rocking point까지(pre-rocking 구간) 증가하였으나 그 이후(post-rocking 구간)에서는 일정한 값을 보였다. 탄성힌지길이에 대한 유한요소해석 결과를 이론적 예측식인 반무한모델(half space model)의 결과와 비교하였다.

기후변화 조건에서 콩 한발스트레스에 대한 광화학 반사 지수 반응 평가 (Evaluation of Photochemical Reflectance Index (PRI) Response to Soybean Drought stress under Climate Change Conditions)

  • 상완규;김준환;신평;백재경;이윤호;조정일;서명철
    • 한국농림기상학회지
    • /
    • 제21권4호
    • /
    • pp.261-268
    • /
    • 2019
  • 한발 발생이 갈수록 증가하고 있는 가운데, 작물의 생리생화학적 기작과 광합성능을 효율적으로 진단 및 평가 할 수 있는 방법을 찾는 것은 매우 중요한 과제이다. 본 연구를 통해 광화학 반사 지수인 PRI가 콩의 한발 스트레스에 대하여 고온과 고CO2 등 미래 기후 변화 환경에서도 유의미한 생육 지표로 활용될 수 있음을 확인하였다. PRI와 대표적 한발 생육지표들(군락 광이용효율, 건물중 변동율, 엽록소 형광, 기공전도도)과의 밀접한 관계를 통해 한발 스트레스 하에서 콩의 광합성 활성과 생장량을 원격으로 모니터링할수 있는 진단 모델 개발의 가능성을 볼 수 있었다. 다만 향후 고온, 고CO2 등 기후변화 조건에서 PRI의 성능에 대한 지속적인 평가와 함께 민감도 향상을 위한 광학지표 개발 및 모델 개선 연구가 선행되어야 할 것으로 보인다.

진동다짐에 의한 기초사석의 침하거동 (Settlement Behavior of Foundation Rubble-mound by Vibro-Compaction)

  • 유건선
    • 대한토목학회논문집
    • /
    • 제31권4C호
    • /
    • pp.127-136
    • /
    • 2011
  • 기초사석 위에서 진동하중을 받는 진동다짐판의 침하는 일시적인 진폭과 소성침하로 나타낼 수 있다. 최대 진동하중이 사석의 지지력을 초과하지 않는 한, 소성침하량은 극한값으로 수렴하며 궁극적으로 정상적인 진동을 한다. 이러한 진동다짐의 침하거동에 대한 실내실험은 수평방향이 구속된 시료에 대하여 진동하중이 전체면적에 작용하도록 수행되었거나 진동대에 시료를 놓고 실험을 수행한 것이 대부분이다. 그러나 실제 현장에서는 진동하중이 기초사석 표면적의 일부에만 적용되고 있다. 본 연구에서는 현장조건에 맞게 쇄석에 진동하중을 작용토록 하였다. 쇄석에 대한 진동다짐실험에 따르면 전체 침하량의 약 90%가 2분 이내에 발생하며, 정적 및 동적응력을 포함한 진동응력 수준이 증가할수록 침하는 증가하였다. 진동다짐시, 진동다짐수, 진폭, 침하량, 재하폭, 진동응력의 상관관계를 나타내는 식을 제안하였다.

DMT를 이용한 사질토 정지토압계수 평가방법 (A Method Evaluating K0 of Granular Soil using DMT)

  • 최성근;이문주;배경두;이우진
    • 대한토목학회논문집
    • /
    • 제30권4C호
    • /
    • pp.193-200
    • /
    • 2010
  • 본 연구에서는 사질토의 응력이력 효과를 평가하기 위해 정지토압계수($K_0$)를 추정하는 방법을 제안하였다. 제안된 방법은 사질토의 상태정수(${\psi}$)를 매개로 하여 $K_D/K_{0-\psi}$ 관계와 $E_D/{\sigma_m}^'-{\psi}$ 관계를 조합한 $K_D/K_0=\chi(E_D/{\sigma_m}^')^{\delta}$ 의 형태로 표현된다. 챔버에서 수행된 딜라토미터시험 결과에 의하면 본 연구에서 제안된 관계식은 응력이력에 영향을 받지 않는 것을 알 수 있었다. 제안된 방법은 사질토의 정지토압계수 추정 시 딜라토미터 시험결과 만을 이용하는 간편한 방법이며, 콘관입시험과 딜라토미터 시험 결과를 동시에 이용하는 기존의 방법에 비해 간단하고 신뢰성이 높은 장점이 있다.

낙동강 모래의 실트함유량 변화에 따른 반복전단응력비 특성 (Characteristics of Cyclic Shear Stress Ratio by Silt Content for Nak-Dong River Sand)

  • 김영수;김대만
    • 대한토목학회논문집
    • /
    • 제29권6C호
    • /
    • pp.277-285
    • /
    • 2009
  • 실트함유량 변화에 따른 낙동강 모래의 반복전단강도 특성을 살펴보고자 낙동강 유역에 분포하는 모래와 실트를 채취하여 실트함유량 0~50%의 범위로 실내에서 재성형된 실트질 모래시료에 대하여 일련의 비배수 반복삼축실험을 실시하였다. 실험 결과, 실트함유량 변화에 따른 반복횟수(N) 10에서의 반복전단응력비(CSR)는 모든 상대밀도에서 실트함유량 5%에서 최대였고, 20%에서 최소를 보였다. 반복비($N/N_L$)에 따른 간극수압비(${\Delta}u/p^{\prime}$) 관계로 부터 분석된 간극수압의 발달 경향은 실트함유량에 따른 CSR 크기변화와는 무관하였다. 압밀 후 간극비(e)와 skeleton 간극비($e_s$)를 비교해 본 결과, 전반적으로 실트함유량에 따른 CSR의 변화 경향과 일치하여 실트함유량에 따른 CSR은 실트질 모래의 전단거동에 영향을 미치는 모래만의 간극비인 skeleton 간극비($e_{s}$)에 큰 영향을 받는 것으로 나타났다.

도계처리 전후의 환경온도가 계육의 생화학적 대사 및 연도에 미치는 영향 (Effect of Antemortem and Postmortem Environmental Temperatures on Biochemical Metabolism and Tenderness in Chicken Muscels)

  • 이유방
    • 한국가금학회지
    • /
    • 제6권1호
    • /
    • pp.24-30
    • /
    • 1979
  • 1. 도살전의 환경온도(38$^{\circ}C$, 2$0^{\circ}C$, 4$^{\circ}C$, -2$0^{\circ}C$)가 닭 가슴고기의 연도와 근육내 해당작용에 미치는 영향을 연구하였다. 고온구는 현저하게(p<0.05) 계육의 연도를 저하시켰고 저온구도 다소 연도의 저하를 초래하였다. 고온구는 대조구보다 근육내 glycogen의 함량과 최초 Ph가 높았고 24시간후의 최종 PH는 현저하게 (P<0.05) 낮았다. 저온구는 대조구와 고온구 사이의 중간수치를 보여주었다. 고기의 절단력(즉 연도)와 근육내 glycogen 함량, 최초 및 최종 근육 산도(PH) 간에는 현저하게 (p<0.01) 높은 상관관계를 나타냈고 사후 해당속도와 가열처리후의 고기의 수화도 역시 유의한(p<0.05) 상관관계를 보여 주었다. 근육 혹은 혈청내의 효소(LDH, CPK)의 활력과 고기 연도와는 아무런 상관관계가 없었다. 2. 도살후 가슴고기와 다리고기를 절취하여 각각 다른 보존온도에 방치하여 근섬유의 단축도를 조사하였던 바 4-1$0^{\circ}C$ 사이에서 가장 낮은 단축도를 보여주었다. $0^{\circ}C$에서 보존시 약간의 단축이 있었으나 현저하지 않았고 보존온도가 2$0^{\circ}C$ 이상일 때 온도상승에 따라 비례적으로 단축도의 급격한 증가를 보여주었다. 따라서 계내에서는 저온보다는 고온에서의 근섬유단축이 더 실제적인 중요성을 가지며 도계후 가급적 속히 15$^{\circ}C$이하로 냉각하므로 심한 연도의 저하를 방지할 수 있다.

  • PDF

Photosynthetic Patterns of 3 Crassulacean Plants under Drought Conditions

  • Kim, Tae-Jin;Choo, Yeon-Sik
    • Journal of Ecology and Environment
    • /
    • 제30권2호
    • /
    • pp.187-193
    • /
    • 2007
  • Higher plants can be categorized as C3, C4 or CAM according to their photosynthetic pathways, and some succulent plants are known to shift their patterns of photosynthesis from C3 to CAM in response to environmental stresses such as salt treatment or water deficiency. To investigate fundamental photosynthetic patterns and the induction of pattern shifts (C3, CAM, C3-CAM etc.) as a result of environmental stresses, we measured the water content, diurnal changes in pH, net $CO_2$ exchange, transpiration rate, total ionic contents, and osmolality of Kalancoe daigremontiana, Sedum kamschaticum and Sedum sarmentosum which belong to Crassulaceae known as representative CAM plant, after 10 days of drought treatment. S. kamschaticum and S. sarmentosum did not show a significant difference in diurnal pH variation in the treatment and control conditions. However, the pH of drought-treated Kalancoe was low at night and high in the daytime, with a pH value between 4 and 5. Typical CAM plants display a net $CO_2$ exchange that increases at night and decreases in the daytime. Kalancoe displayed the predicted pattern. However, S. kamschaticum and S. sarmentosum showed a photosynthetic pattern more typical of C3 plants, and did not show changes in photosynthetic pattern under drought stress. Kalancoe also showed a transpiration rate typical for CAM pho-tosynthesis, whereas the transpiration rates of S. kamschaticum and S. sarmentosum were in the typical range for C3 photosynthesis. Kalancoe had high total ionic contents during the night, which decreased somewhat during the daytime, whereas S. kamschaticum and S. sarmentosum displayed the opposite pattern. This result is similar to the diurnal patterns of changes in pH in the three plant species, which suggests a relationship between pH and ionic contents. S. sarmentosum showed lower osmolality under drought stress than in the control condition, whereas the osmolality of Kalancoe and S. kamschaticum did not differ between conditions. S. sarmentosum may have maintained internal water content by lowering its osmolality and raising its total ionic contents. In conclusion, Kalancoe displayed the characteristic responses of a typical CAM plant, whereas S. kamschaticum and S. sarmentosum displayed aspects of the C3 photosynthetic pattern under drought conditions. These results suggest that S. kamschaticum and S. sarmentosum (Crassulacea) in Korea overcome drought stress by increasing solute and ionic contents internally rather than changing their photosynthetic pattern from C3 to CAM under drought stress.

한국 소아환자들의 병실색채 선호도에 관한 연구 (Korean Pediatric Patients' Preferences for Patient Room Design)

  • 박진규;박창배
    • 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
    • /
    • 제17권2호
    • /
    • pp.45-52
    • /
    • 2011
  • The visual sensory information in physical environments can induce or reduce occupants' stress. In healthcare settings, positive environmental stimulations can promote patient well-being by reducing their stress: poor health environments work against a patient's health. Changing the color in a patient room is an inexpensive process and thus finding better colors for healthcare settings is a cost effective method of improving healing environments. Color may have important implications for pediatric patients, but the investigation of Korean populations has been non-existent. The purpose of this study was to investigate Korean pediatric patients' color preferences for patient room design. The color preferences from 50 Korean pediatric patients were recorded and investigated for gender effects. A simulation method was used because of its reliability and feasibility, allowing for investigating the value of color in real contexts and controlling confounding variables. The overall color preferences from Korean pediatric patients showed that they preferred blue the most and white the least. Gender differences were found in red and purple. Girls preferred red and purple more than boys. The results from this study can help healthcare providers and designers better understand appropriate colors for Korean pediatric patient populations.

A critical steel yielding length model for predicting intermediate crack-induced debonding in FRP -strengthened RC members

  • Dai, Jian-Guo;Harries, Kent A.;Yokota, Hiroshi
    • Steel and Composite Structures
    • /
    • 제8권6호
    • /
    • pp.457-473
    • /
    • 2008
  • Yielding of the internal steel reinforcement is an important mechanism that influences the Intermediate Crack-induced debonding (IC debonding) behavior in FRP-strengthened RC members since the FRP is required to carry additional forces beyond the condition of steel yielding. However, rational design practice dictates an appropriate limit state is defined when steel yielding is assured prior to FRP debonding. This paper proposes a criterion which correlates the occurrence of IC debonding to the formulation of a critical steel yielding length. Once this length is exceeded the average bond stress in the FRP/concrete interface exceeds its threshold value, which proves to correlate with the average bond resistance in an FRP/concrete joint under simple shear loading. This proposed IC debonding concept is based on traditional sections analysis which is conventionally applied in design practice. Hence complex bond stress-slip analyses are avoided. Furthermore, the proposed model incorporates not only the bond properties of FRP/concrete interface but also the beam geometry, and properties of steel and FRP reinforcement in the analysis of IC debonding strength. Based upon a solid database, the validity of the proposed simple IC debonding criterion is demonstrated.