• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.425-430
• /
• 2016

Both rapid industrial development and society has achieved more comfortable life. But, behind this facts of this industrial development have current pictures that occur global warming and much more by-products by environmental pollution. Therefore, this study used BFS and CFA as by-products to reduce cement usage emitted at a high rate of $CO_2$ gas, to examine sludge recycling strategy more than 200,000ton emitted at local dyeing complex, we suggest basic data research about non-cement matrix properties of utilizing dyeing sludge carbide. As a result, the more dyeing sludge carbide replacement ratio gets higher, the more air content and flow rise. Also, as the dyeing sludge carbide replacement ratio increase more, flexural strength and compressive strength go down.

• Journal of the Korean housing association
• /
• v.23 no.1
• /
• pp.27-41
• /
• 2012

The objective of this study is to develop the blind control strategy and method which reduce negative effect of incoming daylight on visual comfort of occupants, minimize psychological anxieties caused by frequent motions of a blind, and maximize positive effect of incoming daylight and solar irradiation by opening/closing of a blind. As previous researches on blind controls have limited outdoor environmental conditions to those in specific regions, orientations and dates, these resulted in problems at various conditions for general-purpose application. Major problem is that the time interval and amount of blind movement do not meet the control objective at the end of control zone and discontinuous curve. To overcome these limitations revealed in the previous researches, following tasks were performed in this study. 1) To establish the control objective to accomplish the goal of this study. 2) To develop the control methods and algorithms which prevent glare on the work-plane at any time and which control the time interval and amount of blind movement to follow the control objective at various profile angle curves. 3) To validate the general-purpose applicability and performance of the developed control methods and algorithms by simulation and its data analysis at various conditions. It was found that the proposed methods and algorithms can prevent the direct glare on the work-plane at all the time and also increase the incoming daylight and solar irradiation.

• Journal of Families and Better Life
• /
• v.30 no.1
• /
• pp.29-40
• /
• 2012

The purpose of this study is to find out the problems of current housing construction standards related to community facilities and to suggest the vitalizing strategies that enhance the sense of community among the residents living in apartment housing complexes. For the purpose, three times small group workshops were executed during April 26~May 3, 2010 for 14 professionals in construction company, university, research institute, and housing management company. Based on the results of small group workshops, questionnaire survey for the 10 professionals was done during August 13~23, 2010 to find out the additional opinions about the revision of housing construction standards related to community facilities in apartment housing complexes. Respondents indicated that the current housing standards related to the types and the area of community facility are too strict to respond to the diverse characteristics and needs of residents. Professionals suggested the newly revised standards that sum up the whole area of community facilities instead of the existing standards that regulate the area of each community facility in an apartment housing complex. Also, they recommended the regional community center that include several facilities in one common community building.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.221-228
• /
• 2010

As container traffic is increasing, the introduction of mega-vessel has had a significant impact on the ports and terminals business. This movement of container shipping has led to intensely competitive environment among ports, so substantial pressures to develop new container ports or to expand existing ones, have been grown. However, it requires a huge investment, especially cost and time, to overcome environmental, geographical and financial restrictions generated from developing a port. This study addressed the Mobile Harbor, the new concept of marine logistics system as an alternative strategy. We performed an economic analysis on the introduction of the Mobile Harbor in coastal transport sector and also a sensitivity analysis to examine the effects of changing factors related on the economic evaluation. We have examined the value and application of Mobile Harbor as a preliminary study, which may contribute to further studies on the Mobile Harbor.

• Resources Recycling
• /
• v.22 no.5
• /
• pp.3-12
• /
• 2013

It is necessary to manage risk of metals which are has rigid supply structures and expected demand expansion, considering to industry structure and resource securing capacity of each country. Countries conducted various criticality analyses and selected mainly rare metals as critical materials(or Critical metals or Critical raw materials). This study examined cases of metals risk evaluation and management which are based on technology changes and imbalance supply-demand. EU and U.S.A evaluated risk on metals needed as supply expansion of renewable energy. Japan forecasted demand of rare metals needed in Japan's growth engine industry. U.K analyzed criticality of metals, considering environmental burden occurred from mining to refining. Critical materials has features such as weak price signal, inelastic supply structure, demand volatility in technology change.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.3
• /
• pp.427-435
• /
• 2011

Objective: The objective of this study was to evaluate a work of building cleaners using the ergonomic methods. Background: Previous studies about cleaning worker describe typical physical demands of this work. They found that the most significant risk factors associated with the physical work of cleaners are static loads and repetitive movements and high output of force. Method: A head of ergonomics estimation was work analysis(define of combined task, work tool, work time and frequency of combined task) and posture analysis of worker. Results: The results showed that combined task of building cleaners was classification sweeping, mopping(wet), mopping(oil), moving barrels/carts, dumping trash bags, scrubbing, arrangement of cleaning tool, arrangement of circumferential, moving of cleaning tool, and waiting. The work time of combined task such as mopping(wet) and scrubbing indicated high ratio. The posture analysis of building cleaners indicated high value in bending of the head, lower arm, and hands. Conclusion: The findings appear to indicate that building cleaner were related to high risk of work-related musculoskeletal disorders. So, building cleaner would be required an interventional strategy, improvement of cleaning tools and working environment. Application: If ergonomics rule can be integrated into existing cleaning tools and work environments, the risk of occupational injuries will be reduced.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.215-223
• /
• 2007

On-Line Shopping mall is becoming important strategic environment that decide corporation's competitive advantages because of that can achieve quality of customer service and offer speed elevation through both-way communication effectively. Accordingly, as interest about electronic commerce rises, various research had been gone. But, most researches are applying off-line market's quality of service measurement tool just as it is doing not consider special quality of internet. Consider and prescribe by system quality, and saw that thing with grasp relation with customer satisfaction along with qualify of service is important for factor that environmental element influences in customer satisfaction as existing commercial transaction in this research hereupon. That is, wished to present quality strategy necessary to examine whether some quality factor of system quality and quality of service affects more customer satisfaction, and satisfy various customer's needs accordingly after ermine whether it are switching and some relation that search purchase alteration availability of market that is different from loyalty which recommend internet shopping mall to another person who is system quality factor and quality of service factor and customer satisfaction factor actively.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.1
• /
• pp.7-15
• /
• 2018

The "Rurban" Design is a design concept that can actively preserve and embrace natural terrain and rural resources in an effort to continuously enhance a city, and restore the community that collapsed due to industrialization and unplanned urbanization. The concentration of Seoul Metropolitan area in Korea and the destruction of rural areas and localities caused by the urban sprawl have become a difficult problem for urban development after industrialization. The development of unbalanced growth and the environmental damage remain as issues as well. The tradition and diversity restoration of the New Urbanism paradigm, which was presented in the latter half of the twentieth century, has been an alternative plan for a big city that had experienced industrialization and urbanization at an early phase. However, there is a limit of application to European and North American cities. The philosophical concept of "Rurban Design" is to apply the use of rural elements more directly, and to outline resource conservation, proper consumption, and suitable scale. In all considerations, this will be a practical strategy to complement the limitations of New Urbanism with its design capacity that maximizes the characteristics of the region.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.1 s.24
• /
• pp.15-22
• /
• 2006

Marine Technology is the last hope of mankind for resolving predestined issues of food, resources, and environmental problems. facing and realizing this great challenge, domestic industrial, academic and research institutional experts participated in formulating the Marine Technology development plan, and the national science and technology committee chaired by the president passed this important plan thus setting the foundation for activating and promoting MT development. A project to develop Marine Technology Road Map(MTRM) has been carried out since June of 2005 for effective execution of the plan 1his paper reviewed current issues of MT and contents of MTRM, and proposed alternative measures for MT activation and promotion such as the establishment of special institutes for managing MT research and development and the fund raising for MT budget.

• Journal of the Korean Society for Railway
• /
• v.17 no.6
• /
• pp.423-432
• /
• 2014

The purchasing behavior of consumers is related to service quality and corporate social responsibility (CSR). Therefore, CSR is recognized as an important factor in company strategies. This study determines the relationship between the CSR activities of KORAIL and the reuse intention and recommendation intention of the consumer. CSR is composed of economic, legal, philanthropic, ethical, and environmental responsibilities. In the results of the structural equation modeling analyses, legal responsibility and economic reliability affect the reliability of KORAIL and this reliability affects the customers' reliability and loyalty. This paper proposes a compliance program, wagon safety information, customized tour packages, and communication strategy that will increase customer's reliability and loyalty.