• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2000년도 한국우주과학회보 제9권2호
• /
• pp.110-110
• /
• 2000

No Abstract, See Full Text

• Environmental Engineering Research
• /
• 제14권4호
• /
• pp.244-249
• /
• 2009

Designing an ozone contactor is complicated because the residual ozone, log C. parvum inactivation, and bromate formation should be optimized with fluctuating water quality. OCM software was developed to assist a plant designer or an operator to fulfill the sophisticated optimization required in the design or operation of a new or an existing plant. In this article, numerical simulations were carried out using the OCM software for the design of a new ozone contactor under diverse design factors (i.e., three pHs, three temperatures, low and high dispersion numbers, and four and ten cells with complete mixing) with kinetic parameters obtained from the sand-filter effluent of a water treatment plant treating water from the Paldang impoundment. The results of the simulation suggested that a high residual ozone concentration at low pH and low temperature would be challenging, and PFR-like hydrodynamics could lower the residual ozone concentration. The inactivation of C. parvum oocysts increased at a lower pH. A lower dispersion number and more cell division increased the inactivation efficiency. Bromate was instantaneously formed during the initial ozonation stage. The effluent concentration was much lower than the regulatory levels imposed by the USEPA because of the low bromide level in raw water.

• 대한환경공학회지
• /
• 제28권10호
• /
• pp.1082-1089
• /
• 2006

본 연구에서는 지리지형정보를 바탕으로 전국규모의 환경정보를 관리하고 환경모델링을 지원할 수 있는 환경지리지형정보시스템을 개발하였다. 이 시스템은 환경지리지형정보 DB(Database)와 이를 이용할 수 있는 소프트웨어(Software)를 통합하여 구성하였다. 환경지리지형정보 DB를 구축하기 위해서 기존의 지리지형정보로부터 환경관리에 필요한 여러 도형정보(점, 선, 면)를 선별하여 추출하였고, 이러한 도형정보에 환경정보를 연결하여 환경지리지형정보를 구축하였다. 환경지리지형정보를 쉽게 이용하기 위해서 비주얼 베이직(Visual Basic) 컴파일러를 이용하여 소프트웨어를 개발하였다. 이 소프트웨어는 DB를 가시화할 뿐만 아니라, 다양한 환경지리지형정보를 손쉽게 검색하고, 노출평가를 위한 환경거동모델링에 필요한 입력데이터를 자동으로 생성하기 위한 유용한 도구이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1-5
• /
• 2007

An electric motor unit (EMU) is manufactured from a large number of components and parts which are made of extensive raw materials. In emits much environmental load throughout its entire life cycle, having both complicated and elaborated system and long period of life time. Therefore, it is necessary to investigate the methodologies and tools to analyze the environmental performance of EMUs throughout their life cycle. RACE (Rail Assessment for Clean Environment) developed in this study is the software that can analyze the environmental impacts and eco-efficiency of EMUs, which are new concepts proposed for sustainable development. It has database for main components as well as principal materials contained in EMUs. Manufacturers and operators can use it to assess the life-cycle environmental impacts of EMU and support their decision making. RACE can also be used as a tool for environmental communication between manufacturers and operators.

• International Journal of Advanced Culture Technology
• /
• 제11권2호
• /
• pp.381-388
• /
• 2023

Small-scale environmental impact assessments have limitations in terms of survey duration and evaluation resources, which can hinder the assessment and analysis of the current situation. In this study, we propose the use of drone technology during the environmental impact assessment process to supplement these limitations in the current situation analysis. Drone photography can provide rapid and accurate high-resolution images, allowing for the collection of various information about the target area. This information can include different types of data such as terrain, vegetation, landscape, and real-time 3D spatial information, which can be collected and processed using GIS software to understand and analyze the environmental conditions. In this study, we confirmed that terrain and vegetation analysis and prediction of the target area using drone photography and GIS analysis software is possible, providing useful information for environmental impact assessments.

• 한국환경과학회지
• /
• 제5권6호
• /
• pp.683-697
• /
• 1996

Industrial ventilation is a crucial engineering measure to protect workers from hazardous airborne contaminants. Designing a ventilation system is not an easy task. To solve this problem, many U. S. computer programs and softwares have been developed. In Korea, asoftware, called as VPMC, was developed by Korea Industrial Safety Corporation. But VPMC could not stand alone since it can be used to design not a hood, but a ventilation system. In this research, therefore, a preprocessing software was developed. It can be used to design general ventilation system, canopy hood, open surface tank hood. The program was written in Microsoft Visual Basic. In near future, this software will be incorporated into a total package software which can be used to design a whole ventilation system.

• 한국환경보건학회지
• /
• 제30권2호
• /
• pp.108-114
• /
• 2004

Observation of microorganisms collected from contaminated soils has been mainly conducted by using microscopy. Microscopic measurement is occupied an important part of the microorganism experiment, and is used as an important tool to count microorganisms as well as to observe cellular form and mode of life in the field of soil microbe observation. In general, observation equipments for soil microbes consist of electron microscope, camera, frame grabber (image acquisition baud), and image analysis software. Because image analysis software should be linked with frame grabber most equipments have to be imported as the package form. Therefore, the observation system is very expensive and difficult to be operated. In this study, soil microbes＇ observation equipment with the vision system which is easy operated and cheaper than imported one was developed and tested. The efficiency of image capturing and data aquisition with developed frame grabber and software in this experiment was good enough to analyze the image of soil microorganism.

• KSBB Journal
• /
• 제13권4호
• /
• pp.461-467
• /
• 1998

A fermentation system was supplemented with a device for the measurement of the durations of alkali pump feeding for automatic pH control and an A/D convertor for precise monitoring of pH value by computer. A software program was developed to measure buffer capacities from the pH signal and the pH control signal during fermentation. By measuring the buffer capacity on-line, levels of acetic acid were estimated by a software sensor using pH signal in a fermentation process of E.coli growing in a minimal medium. The measured values of acetic acid showed correlation to those of estimated by the software sensor. Lacitic acid production was also successfully estimated by the values of buffer capacities measured on-line.

• Steel and Composite Structures
• /
• 제51권2호
• /
• pp.127-138
• /
• 2024

In this paper, structural behavior under fire conditions is comprehensively examined, and a novel software interface for testing interfaces efficiently is developed and validated. In order to accurately assess the response of structures to fire scenarios, advanced simulation techniques and modeling approaches are incorporated into the study. This interface enables accurate heat transfer analysis and thermo-mechanical simulations by integrating software tools such as CSI ETABS, CSI SAP2000, and OpenSees. Heat transfer models can be automatically generated, simulation outputs processed, and structural responses interpreted under a variety of fire scenarios using the proposed technique. As a result of rigorous testing and validation against established methods, including Cardington tests on scales and hybrid simulation approaches, the software interface has been proven to be effective and accurate. The analysis process is streamlined by this interface, providing engineers and researchers with a robust tool for assessing structural performance under fire conditions.

• 환경기술인
• /
• 통권173호
• /
• pp.85-89
• /
• 2001