• Current Optics and Photonics
• /
• 제5권3호
• /
• pp.289-297
• /
• 2021

We describe a comb-mode resolving spectroscopic technique by direct time-domain phase correction of unstable interferograms obtained from loosely locked two femtosecond lasers. A low-cost continuous wave laser and conventional repetition rate stabilization method were exploited for locking carrier and envelope phase of interferograms, respectively. We intentionally set the servo control at low bandwidth, resulting in severe interferograms' fluctuation to demonstrate the capability of the proposed correction method. The envelope phase of each interferogram was estimated by a quadratic fit of carrier peaks to correct timing fluctuation of interferograms in the time domain. After envelope phase correction on individual interferograms, we successfully demonstrated 1 Hz linewidth of RF comb-mode over 200 GHz optical spectral-bandwidth with 10-times signal-to-noise ratio (SNR) enhancement compared to the spectrum without correction. Besides, the group delay difference between two femtosecond pulses is successfully estimated through a linear slope of phase information.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.171-174
• /
• 1997

In this study, a computer program was developed which generates automatically a drawing of the forging design in axisymmetric hot-forging of steel. The program designs a forging envelope from a machined part geometry according to forging design rules: parting line, draft angles, fillet and corner radii, minimum web and rib thicknesses. For the purpose of verification, the program was applied to a machined part from a factory. It was found that the generate forging design agreed well with the actual one used in the factory.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권2호
• /
• pp.97-107
• /
• 2004

Wall/floor intersection is important parts of a building envelope system. These intersections can be sources of thermal bridging effects and/or moisture condensation problems. This paper provides a detailed analysis of the thermal performance of wall/floor intersection. In particular, two-dimensional steady-state and transient solutions of the heat conduction within the wall/floor joint are presented. Various insulation configurations are considered to determine the magnitude of heat transfer increase due to wall/floor joint construction.

• Journal of Dairy Science and Biotechnology
• /
• 제36권4호
• /
• pp.208-219
• /
• 2018

낙농업 및 유가공 제품의 생산과 유통에서 살모넬라 감염에 의한 살모넬라증의 발생은 빈번하며, 이 세균의 항미생물 제제에 대한 내성 증가 현상 또한 지속되고 있어 새로운 항미생물 제제의 수요는 감소하지 않는다. 세균막의 훼손은 세균 생존을 쉽게 위협할 수 있기 때문에 개발되는 항미생물 제제들은 주로 세균의 막을 표적으로 삼지만, 개발되는 제제들이 실제로 세균막의 훼손을 초래하는지 구별하는 것은 많은 노력과 비용을 수반한다. 본 연구에서는 E. coli 세포막 스트레스에 의해 발현이 유도되고, 세균막 외부공간에서만 위치하며, 그 구조상 많은 단백질의 구조 안정화에 기여할 것으로 예상되는 chaperone 단백질 Spy(spheroplast protein Y)의 유전자에 상응하는 살모넬라 spy 유전자에 gfp(green fluorescence protein) 오페론 융합체를 제조하여, 이 융합체가 Salmonella enterica의 두 혈청형 Enteritidis와 Gallinarum의 세포막 스트레스를 인지하여 GFP 발현량이 크게 증가하는 것을 확인하였다. 또한 세균막 스트레스 신호를 특이적으로 인지하는 이인자 신호전달 체계(two component signal transduction system)인 Bae와 Cpx들이 두 살모넬라 혈청형의 spy 유전자 전사 유도에 필수적임을 확인하였다. 따라서 본 연구에서 사용한 spy-gfp 오페론 융합체는 S. Enteritidis와 S. Gallinarum의 세포막 훼손을 특이적이고 신속하게 인식하는 biosensor로서 활용될 수 있을 것으로 판단된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
• /
• pp.951-954
• /
• 2000

In this paper, we present a multi-code parallel combinatory CDMA system using bi-orthogonal modulation to reduce envelope variation and improve bit error. .rate (BER) performance. In general, the dynamic range of the amplitude of the transmit signal is very large in the case of conventional multi-code CDMA systems, resulting in severe nonlinear distortion due to high power amplifier and thus significant BER performance degradation. The proposed system exhibits reduction of peak-to-average power ratio (PAPR) of the transmit signal amplitudes and significant performance improvement. We verify the performance of the proposed system by computer simulations under AWGN channel and flat fading channel.

• 한국군사과학기술학회지
• /
• 제16권1호
• /
• pp.27-33
• /
• 2013

Helmet Mounted Display(HMD) has great advantages on the navigation and mission symbologies for the pilot's forward looking display and, therefore, has been remarkably drawing attention as the up coming display of the next generation aircraft. The essential technology to process the Line of Sight-Foward(LOS-F) data in real-time is to estimate exact helmet situation and position. In this paper, we research a acoustic helmet tracking technique. For the reason that mechanical acoustic noises might interfere with Helmet Tracking System(HTS) and unnecessary acoustic noises are inevitable when using acoustic technique, this approach has not been adapted. In order to overcome this problem. We propose that acoustic wave of which the wave length is longer than audio frequency and, especially, we used beating signal envelope which is composed of two close high frequency.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2451-2456
• /
• 2003

In biological cell manipulation, manual thrust or penetration of an injection pipette into an egg is currently performed by a skilled operator, relying only on visual feedback information. Massive load of various micro injection of either genes, fluid or cells in the postgenomic era calls a more reliable and automatic micro injection system that can test hundreds of genes or cell types at a single experiment. We initiated to study cellular force sensing in zebrafish eggs as the first step for the development of a more controllable micro injection system by any inexperienced operator. Zebrafish eggs at different developmental stages were collected and an integrated biomanipulation system was employed to measure cellular force during penetrating the egg envelope, the chorion. First of all, the biomanipulation system integrated with cellular force sensing instrument is implemented to measure the penetration force of cell membranes and characterize mechanical properties of zebrafish embryo cells. Furthermore, implementation of cellular force sensing system and calibration are presented. Finally, the cellular force sensing of penetrating cell membranes at each developmental stages was experimentally performed. The results demonstrated that the biomanipulation system with force sensing capability can measure cellular force at real-time while the injection operation is undergoing. The magnitude of the measured force was in the range of several hundreds of uN. The precise real-time measurement should provide the first step forwards for the development of an automatic and reliable injection system of various materials into biological cells.

• 한국실내디자인학회논문집
• /
• 제22권1호
• /
• pp.11-18
• /
• 2013

The Contemporary consumer society demands companies to emphasize more on the brand marketing that can deliver the brand identities distinguished from those of competing companies. In today's environment, the meaning of consumption is not only a simple purchase of a product, but also assimilation into images, experience and emotional aspects of the brand. The flagship stores of brands take the advantage of the tendency seriously and utilize the envelopes of the building as marketing catalysts to establish their brand identities. This paper aims to investigate the possibility of the architectural envelope as a marketing element to establish the brand identities, by analyzing the design techniques that enhance the visual effects utilizing innovative application of material, pattern and connection details. it is studied that the function of architectural envelope's change from past to recent date and role of architectural envelope as means of marketing for expression brand image in contemporary commerce space and elements that can be applied on architectural envelope with theoretical consideration about marketing and brand identity. Also this paper will research about experience elements because the process for consumers to recognize brand image with architecture is the process of visual experience. And through example research, this paper will study interrelationship between visual system of cognition to be expressed on architectural envelope.

• 천문학논총
• /
• 제30권2호
• /
• pp.201-204
• /
• 2015

The common-envelope process is a complicated phase in binary evolution. A lot of effort has been dedicated to study the common-envelope stage, but many questions related to this process are yet to be answered. If one member of the binary survives the common-envelope phase, the binary will emerge as a white dwarf accompanied by a low-mass main sequence star in close orbit, often referred as a post common-envelope binary (PCEB). SDSS J0745+2631 is among the list of newly found PCEBs from the Sloan Digital Sky Survey (SDSS). This star is proposed to be a strong eclipsing system candidate due to the ellipsoidal modulation in its light curve. In this work, we aim to confirm the eclipsing nature of SDSS J0745+2631 and to determine the stellar and orbital parameters using the software Binary Maker 3.0 (BM3.0). We detected the primary eclipse in the light curve of SDSS J0745+2631 in our follow-up observation from January 2014 using the ULTRASPEC instrument at the Thai National Observatory. The data obtained on 7th and 8th January 2014 in g filter show an evident drop in brightness during the eclipse of the white dwarf, but this eclipse is less prominent in the data taken on the next night using a clear filter. According to our preliminary model, we find that SDSS J0745+2631 hosts a rather hot white dwarf with an effective temperature of 11500K. The companion star is a red dwarf star with a temperature of 3800K and radius of 0.3100 $R_{\odot}$. The red dwarf star almost fills its Roche lobe, causing a large ellipsoidal modulation. The mass ratio of the binary given by the Binary Maker 3.0 (BM3.0) model is M2/M1 = 0.33.

• 제어로봇시스템학회논문지
• /
• 제21권3호
• /
• pp.199-209
• /
• 2015

This paper presents a model predictive control (MPC) approach to control the steering angle in an autonomous vehicle. In designing a highly automated driving control algorithm, one of the research issues is to cope with probable risky situations for enhancement of safety. While human drivers maneuver the vehicle, they determine the appropriate steering angle and acceleration based on the predictable trajectories of surrounding vehicles. Likewise, it is required that the automated driving control algorithm should determine the desired steering angle and acceleration with the consideration of not only the current states of surrounding vehicles but also their predictable behaviors. Then, in order to guarantee safety to the possible change of traffic situation surrounding the subject vehicle during a finite time-horizon, we define a safe driving envelope with the consideration of probable risky behaviors among the predicted probable behaviors of surrounding vehicles over a finite prediction horizon. For the control of the vehicle while satisfying the safe driving envelope and system constraints over a finite prediction horizon, a MPC approach is used in this research. At each time step, MPC based controller computes the desired steering angle to keep the subject vehicle in the safe driving envelope over a finite prediction horizon. Simulation and experimental tests show the effectiveness of the proposed algorithm.