• 한국대기환경학회지
• /
• 제21권5호
• /
• pp.537-545
• /
• 2005

A new dispersion model for dense gas is constructed in the Lagrangian framework. Prediction of concentration by the proposed model is compared with measure data obtained in the experiment conducted in Thorney Island in 1984. Two major effects of dense gas dispersion, gravity slumping and stratification effect, are successfully incorporated into LDM (Lagrangian dense gas model). Entrainment effect is naturally modelled by introducing stochastic dispersion model with the effect of turbulence suppression by stratification. Not only various releasing conditions but also complex terrain can be extended to, although proposed model is appropriate for flat terrain.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제21회 KOSCO SYMPOSIUM 논문집
• /
• pp.202-211
• /
• 2000

Characteristics of the fuel injection and entrainment of the primary air of gas burner have been investigated. Primary air flow rates that entrained by gas streams play major role to control the performance of the partially premixed combustion. Pressure distributions of mixing tube assembly are studied as major parameter for increasing the primary air flow rates. Buoyancy-effect burner is proposed as one alternative to improve the pressure distribution. Buoyancy effect caused by metal ring placed around the flame holes reduces pressure of the entrance of the mixing tube and that, entrained air flow rates are increased.

• 한국자동차공학회논문집
• /
• 제8권4호
• /
• pp.10-17
• /
• 2000

This work presents an investigation of aerodynamic characteristics of fuel spray injected from a high pressure hollow cone swirl injector into a constant volume chamber. Laser tomography visualization was used to interrogate the fuel and air mixing characteristics and the effect of chamber pressure and temperature increase was analyzed, Preliminary results on spray development showed that mixing effect tends to increase with the increase of injection pressure and chamber gas pressure yielding a decrease of spray penetration and an attenuation of well-defined vortex structure. Topological analysis of the spray structure has been performed to initiate the understanding of mixing and vaporization process. For the present experimental conditions fuel injection pressure and chamber gas pressure appear as the dominant factors which govern the transient mixing characteristics. Moreover spray atmixation characteristics are improved by increasing chamber gas temperature.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.796-799
• /
• 2007

In the bench scale test unit consisting of four commercial filter elements, the traces of the transient pressure around the nozzle and overpressure in the filter cavity were measured to estimate the effect of nozzle on pulse cleaning. For the given pulse cleaning system, the convergent nozzle displayed better performance than the straight one. The optimum ratio of outlet to inside diameter of convergent nozzle was determined, which minimized the pulse gas consumption and maximized the entrainment effect. The angle and height of nozzle convergent part was also optimum operational condition, which is meaningful to the industrial applying.

• 천문학논총
• /
• 제9권1호
• /
• pp.21-38
• /
• 1994

We have developed a cylindrical mixing layer model of a stellar jet including cooling effect in order to understand an optical emission mechanism along collimated high velocity stellar jets associated with young stellar objects. The cylindrical results have been calculated to be the same as the 2D ones presented by Canto & Raga(1991) because the entrainment efficiency in our cylindrical model has been obtained to be the same value as the 2D model has given. We have discussed the morphological and physical characteristics of the mixing layers by the cooling effect. As the jet Mach number increases, the initial temperature of the mixing layer goes high because the kinetic energy of the jet partly converts to the thermal energy of the mixing layer. The initial cooling of the mixing layer is very severe, changing its outer boundary radius. A subsequent change becomes adiabatic. The number of the Mach disks in the stellar jet and the total radiative luminosity of the mixing layer, based on our cylindrical calculation, have quite agreed with the observations.

• 대한기계학회논문집B
• /
• 제33권12호
• /
• pp.1014-1021
• /
• 2009

A new eddy viscosity equation was formulated from assumption of turbulence length scale equation and specific dissipation ratio equation. Then, a set of turbulence model equations for the turbulent kinetic energy ${\kappa}$, the viscosity ${\nu}_t$, and the intermittency factor ${\gamma}$ is proposed by considering the entrainment effect. Closure coefficients are determined by experimental data and resorting to numerical optimization. Present model has been applied to compute four representative cases of free shear flows and successfully compared with experimental data. In particular, the spreading rate, the centreline mean velocity and the profiles of intermittency are calculated with improved accuracy. Also, the proposed ${\nu}_t-{\kappa}-{\gamma}$ model was applied to channel flow by considering the wall effect and the results show good agreements with the Direct Numerical Simulation data.

• 한국유체기계학회 논문집
• /
• 제15권1호
• /
• pp.27-35
• /
• 2012

A numerical simulation for particle collection efficiency in a wire-plate electrostatic precipitator (ESP) has been performed. Method of characteristics and finite differencing method (MOC-FDM) were employed to obtain electric field and space charge density, and lattice boltzmann method (LBM) was used to predict the Electrohydrodynamic (EHD) flow according to the ion convection. Large eddy simulation (LES) was considered for turbulent flow and particle simulation was performed by discrete element method (DEM) which considered field charging, electric force, drag force and wall-collision. One way coupling from FDM to LBM was used with small and low density particle assumption. When the charged particle collided with the collecting plate, particle-wall collision was calculated for re-entertainment effect and the effect of gravity force was considered.

• 한국수자원학회논문집
• /
• 제56권spc1호
• /
• pp.1049-1058
• /
• 2023

보와 저낙차 댐과 같은 하천횡단구조물을 통과하는 흐름은 도수 현상을 동반하는 급변류가 지배적이다. 구조물 하류에서 도수로 인한 유속과 수면의 강한 비정상성은 수공구조물의 안정에 영향을 줄 수 있다. 특히, 높은 Froude 수 조건에서 발생하는 정상도수는 공기연행이 현저하게 발생하여 흐름 특성은 더욱 복잡해진다. 이 연구에서는 Froude 7.3 조건에서 발생하는 정상도수를 모의하기 위해서 큰와모의 기법과 하이브리드 VoF 기법을 이용한 수치모의를 수행하였다. 수치모의 결과는 구조물 하류 바닥면에서 계측된 순간최대압력과 시간평균압력 분포를 유사하게 재현하는 것으로 나타났다. 단, 구조물 직하류에서의 순간최소압력 분포는 대상으로 하는 실험 계측값과 반대의 양상을 보이지만, 유사한 다른 시험과는 같은 양상을 보임으로써 본 연구에서 수행한 수치모의는 합리적으로 압력변동을 예측하는 것으로 판단된다. 도수 중앙부에서의 연직방향 유속분포와 공기농도분포는 유사한 조건의 실험 결과들과 자기상사성을 보이면서 양호하게 일치하는 것으로 나타났다. 이러한 결과는 본 연구에서 적용한 큰와모의 기법과 하이브리드 VoF 기법이 높은 Froude 수 조건에서 강한 공기연행을 동반하는 도수현상을 양호하게 재현할 수 있음을 보여준다.

• 대한환경공학회지
• /
• 제35권12호
• /
• pp.967-972
• /
• 2013

질소산화물 저감에 큰 효과가 있는 MILD 연소는 고온의 배기가스가 연소로내에 유입되는 양에 따라 질소산화물 저감 특성이 많은 영향을 받는다. 본 연구에서는 동심원관 형태의 MILD 연소로에서 바깥 원통의 배기가스 통로에서부터 안쪽 원통의 연소통로 사이에 연결관을 설치하고 배기가스를 유입하기 위해 coanda 노즐을 사용하였다. 이러한 coanda 노즐의 기하학적 형상 변화에 따라 고압공기 유량, 배기가스 유입량 특성을 수치해석을 통해 살펴봄으로써 최적의 coanda 노즐 형상을 도출하는 것을 본 연구의 목적으로 하였다. 본 연구의 전산 해석의 결과는 conada 노즐의 노즐 통로 간격이 0.5 mm, 노즐 각도 $4^{\circ}$, 노즐 확관 길이 146 mm일 때 최적의 유입량비가 되었고 노즐 통로 수직 길이는 유입량비에 무관하였다.

• 한국추진공학회지
• /
• 제22권2호
• /
• pp.11-19
• /
• 2018

본 연구에서는 하이브리드 로켓용 파라핀/알루미늄 연료의 유변학적 특성 파악을 위한 점도 측정을 수행하였다. 혼합된 알루미늄 입자의 크기와 첨가량에 따른 유변학적 특성을 파악하기 위해 평균 입도 100 nm, $8{\mu}m$의 나노 및 마이크로 크기 알루미늄 입자첨가 시료를 제작하였으며, 회전형 레오미터를 사용해 점도를 측정하였다. 나노 및 마이크로 입자 함유비에 따른 증가율 패턴은 대단히 상이하였으며 입자의 함유비 10 wt%를 경계로 점도 증가율이 구분되었고, 나노입자 첨가 시 연료의 유입 후퇴율 감소에 따른 총 후퇴율의 저하를 예상할 수 있었다.