• Korean journal of food and cookery science
• /
• v.24 no.3
• /
• pp.304-311
• /
• 2008

This study examined Jeung-pyun(JP) Retrogradation in samples containing 3% whole protein, 7S protein, or 11S protein(w/w) that were stored at $4^{\circ}C$ for 6, 12, 24 and 72 hr. Rheometery and differential scanning calorimetry(DSC) were used in the analysis. The pH of the dough decreased during the fermentation process, but it increased after steaming. The JP prepared with soybean protein isolate(SPI) had higher pH than the control group. During storage the textural characteristics of the JP showed effects according to the additions of SPI. After 6 hr of storage, the JP samples containing soybean flour, whole protein, 7S protein, and 11S protein had lower hardness valuse. From 4 hr to 12 hr, higher springiness values were found in the samples containing whole protein, 7S protein and 11S protein. At 0 hr, the control group had the highest cohesiveness value, but after 24 hr it presented the lowest value. For gumminess, after 6 hr of storage, the control group offered the lowest value. Whereas after 12 hr of storage the whole protein group showed the highest value, and at 24 hr, the whole protein, 7S protein, and 11S protein groups had higher values. According to the DSC results, the 11S protein group had lower enthalpy values(${\bigtriangleup}H$) suggesting that adding 11S protein to JP might improve starch retrogradation. After 72 hr of storage, the control group had the highest onset temperature($T_{o}$) and peak temperature($T_{p}$) whereas the 7S and 11S protein JP samples had higher conclusion temperatures($T_{c}$). Therefore, based on the different analysis result between the control and treatment groups, the addition of SPI to Jp had effects on retrogradation.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.3
• /
• pp.279-287
• /
• 2006

This study was carried out to investigate the influences of modified starches on suppression of retrogradation in Korean rice cake for their optimization, Garaeduk. Based upon studying Avrami equation, the Avrami exponent n value of all the experiment samples was found to be 1.03 ${\sim}$ 1.37 in the influence of modified starches on retrogradation of the rice cake. This means that the retrogradation of the Korean rice cake occurred instantly after the crystallization of starch particles in the Korean rice cake formulated by modified starches. The highest Avrami exponent n value was indicated in the control sample. The rate constant k of retrogradation in the Korean rice cake formulated by modified starches showed comparatively low and appeared to be the lowest in the Korean rice cake formulated by SHPP. This tendency was shown well in the time constant(1/k) of retrogradation velocity. According to the DSC analysis, the onset temperature of gelatinization in thermal characteristics showed somewhat high in case of addition of modified starch into the Korean rice cake on storage time and the SHPP was slowly gone up. In peak temperature of gelatinization in thermal characteristics of the DSC analysis, SSOS and ASA were increased a little in comparison with the control. The control was comparatively high increase. Melting enthalphy of all samples added with modified starches (SSOS: 21.1${\rightarrow}$23.7${\rightarrow}$24.1, ASA: 21.1${\rightarrow}$24.8${\rightarrow}$25.4) appeared to be lower than that of the Korean rice cake without modified starches(21.2${\rightarrow}$26.1${\rightarrow}$27.1). The Korean rice cake added with SHPP was shown to be the lowest in the increasing rate of melting enthalpy(20.9${\rightarrow}$21.4${\rightarrow}$22.1). Heat spreadability of all the samples in Martin melting diameter was revealed to be good in order of control, ASA, SSOS, SHPP and especially the Korean rice cake added with SHPP was shown to be the best in heat spreadability. In color, sensory examination and textural characteristic of the Korean rice cake added with modified starches, the L$^*$value was not changed practically with the storage time and seemed to be stable. The a$^*$ value of the samples was followed by control(2.21${\rightarrow}$5.34: 141.6%), ASA (2.01${\rightarrow}$4.22: 110.0%), SSOS (2.78${\rightarrow}$4.87: 75.2%) and SHPP (2.12${\rightarrow}$3.40: 60.4%) in order of color change. Also the b$^*$ value of the samples was followed by control(4.32${\rightarrow}$6.35: 47.0%), ASA (4.66${\rightarrow}$5.73: 23.0%), SSOS (4.90${\rightarrow}$5.89: 20.2%) and SHPP (4.89${\rightarrow}$5.12: 4.7%) and there was the least (or no) color change with the SHPP. Textural characteristics of samples was shown to be the highest in case of modified starch addition and especially SHPP appeared to be the best in texture.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.700-706
• /
• 2005

The objectives of this research were to analyze physicochemical properties of physically modified rice starch which was prepared by hydro-shear homogenizer and ultrasonic homogenizer. The 5:1 of water to starch ratio, 20,500 rpm of hydro-shear homogenizer, and 5 sec of pulse and 40 kHz of frequency of ultrasonic homogenizer, which were operated for 10 min. The 1/3 of size reduction of raw rice starch and gelatinized rice starch, and reduced of particle size were achieved by above processing conditions. The homogenization of raw rice starch and gelatinized rice starch were higher values of specific area, transmittance, solubility and swelling power than control. While, these had lower value of apparent viscosity than control. In raw rice starch, the gelatinization characteristics of ultrasonic homogenizer treated rice starch had some higher values of gelatinization temperature, peak temperature and enthalpy than those of control. While, those of hydro-shear homogenizer treated rice starch had similar values to those of control.

• Korean journal of food and cookery science
• /
• v.29 no.6
• /
• pp.653-660
• /
• 2013

Acaiberry(Euterpe oleracea Mart.) was partially substituted from the formula for juak and the subsequent effects on the physiochemical and physical characteristics. And this study was carried out to standardize the recipe of acaiberry-juak. Acaiberry powder was added in 0(control), 1, 3 and 5% substitution ratios by weight per glutinous rice flour. Also, acaiberry puree was added in 3, 6 and 9% substitution ratios by weight water. The moisture contents showed juak with addition of acaiberry contents were lower then control. The diameter of the juak decreased with increasing levels of the added acaiberry powder and puree, whereas the height increased with increasing amount of the powder and puree. The Hunter colorimeteric L-values of the dough and acaiberry-juak decreased as the amount of acaiberry powder and puree increased. Hunter a and b-values both increased with increasing levels of the acaiberry powder and puree. Textural characteristics there were increase in hardness, springiness, chewiness as the amount of acaiberry powder and puree increased(p<.001). Cohesiveness were not significantly different as the level of acaiberry powder and puree increased(p<.001). The anti-oxidant capacity results, anthocyanin, DPPH radical scavenging activity, SOD-like activity, Nitrate-scavenging ability tended to increased by according to the addition acaiberry powder and puree(p<.001). As measured DSC, the onset temperature and enthalpy were accordingly increased during storage period as the acaiberry contents were higher then control. According to sensory evaluation results, the after swallowing, appearance, flavor, taste and texture of juak was acaiberry powder 1% and acaiberry puree 6% proper score is recorded. Overall acceptability of acaiberry juak powder 1%, puree 6% percent of the additives are also the highest mark in the sensory characteristics. Also aciberry powder addition of more than demonstrate a good reputation in the development juak will suggest more appropriate form of puree.

• Korean Journal of Food Science and Technology
• /
• v.40 no.3
• /
• pp.321-325
• /
• 2008

This study was carried out to examine the effects of wheat flour ferment cultured by Lactobacillus acidophilus on the physical characteristics of cooked noodle. Different scanning calorimeter(DSC) analysis results for noodle gelatinization showed that the noodles containing flour ferment had higher enthalphy values than the control noodle. And based on the degree of retrogradation for the noodles containing the flour ferment, enthalpy decreased as the amount of the ferment increased, resulting in the delay effect on the retrogradation. According to textural property evaluations over a storage period, the noodles containing the flour ferment had increases in hardness and cohesiveness, and the springiness of the control group was higher than that of the noodles containing the flour ferment; however, this difference between groups gradually disappeared with increasing storage time. Finally, the noodles containing 10% flour ferment had a higher overall preference score than the control group, indicating that the addition of the flour ferment during noodle production can have a beneficial effect on the preference.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.5
• /
• pp.42-48
• /
• 2008

This study was conducted to discuss the effects of hardener and extender contents on peak temperature, reaction enthalpy (${\Delta}H$), gelation time, viscosity change, and pH value in three types of UMF (urea-melamine- formaldehyde) resin with the help of perpHecT LogR meter, differential scanning calorimetry (DSC), and advanced rheometric expansion system (ARES), The results indicated that the pH value of Control A steeply decreased to 5,2 in the early stage but relatively remained constant thereafter as in Synthesis 1 and Synthesis 2, The peak temperature and time decreased as well, whereas ${\Delta}H$ and viscosity increased with the increase of hardener content. On the other hand, ${\Delta}H$ was not changed up to the extender content of 5% and then decreased with its further addition, And the pH value and peak temperature showed no change with the increase of extender content at the hardener content of 5% in three types of UMF resin, The effect of hardener content in this experiment, however, appeared more conspicuous in Control A than in the other two types of Synthesis 1 and Synthesis 2, These results might be caused by higher molecular weight with longer chains of methylene ($-CH_2-$) and methylene ($-CH_2-O-CH_2-$) ether bridges or much more branched chains in Control A.

• Journal of Welding and Joining
• /
• v.21 no.4
• /
• pp.39-45
• /
• 2003

Nano-TiO$_2$ photocatalytic coatings were deposited on the stainless steel 304(50$\times$70$\times$3mm) by the APS(Atmospheric Plasma Spraying). Photocatlytic reaction was tested in MB(methylene blue) aqueous solution. For applying nano-TiO$_2$ powders by thermal spray, the starting nano-TiO$_2$ powder with 100% anatase crystalline was agglomerated by spray drying. Plasma second gas(H$_2$) flow rate and spraying distance were used as principal process parameters which are known to control heat enthalpy(heat input). The relationship between process parameters and the characteristics of microstructure such as the anatase phase fraction and grain size of the TiO$_2$ coatings were investigated. The photo-decomposition efficiency of TiO$_2$ coatings was evaluated by the kinetics of MB aqueous solution decomposition. It was found that the TiO$_2$ coating with a lower heat input condition had a higher anatase fraction, smaller anatase grain size and a better photo-decomposition efficiency.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1205-1215
• /
• 1992

The solidification rate is of special importance in determining the casting structures and properties. The heat transfer characteristics at the interface between the mold and the casting is one of the major factors that control the solidification rate. The thermal resistance exists due to the air-gap formation at the mold/casting interface during the freezing process. In this study two-dimensional Stefan problem with air-gap resistance in the rectangular mold is considered and the heat transfer characteristics is numerically examined by using the enthalpy method. The effects of the major parameters, such as mold geometry, thermal conductivity, heat transfer coefficient, and initial temperature of casting, on the thermal characteristics are investigated.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.618-622
• /
• 2007

In the present study, the cooling and heating operation characteristics of a multi-heat pump have been experimentally investigated for the number of the indoor units(A, B, C) and the operating conditions. The heat pump was controlled by an inverter scroll compressor. The performance of the heat pump was measured by the multi-calorimeter of an air enthalpy method. Cooling and heating capacities and COPs were obtained at the cooling and heating temperature conditions and the setting temperatures of an indoor unit. With increasing the operation frequency of the compressor, the cooling and heating capacities of the heat pump increased linearly. The operation frequency region of the compressor was different as the combination of the indoor unit and the cooling/ heating condition.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.6
• /
• pp.372-380
• /
• 2008

In order to control indoor air quality and save energy, it is needed to install a suitable ventilation system equipped with heat exchanger for heat recovery. Paper heat exchanger can recover $50{\sim}70%$ of the enthalpy difference between supply and exhaust air. The purpose of this research is to obtain the experimental correlations for the friction factor, heat transfer coefficient, mass transfer coefficient and permeance of paper heat exchanger, which can be used to predict the performance of the paper heat exchanger. Pressure drops at various velocities, and sensible and latent heat transfer rates at various dry-bulb temperatures, relative humidities and specific humidities are measured to derive experimental correlations. The results of prediction using correlations show fairly good agreement with the experimental data obtained in the actual operating conditions.