• 한국지열·수열에너지학회논문집
• /
• 제6권1호
• /
• pp.1-7
• /
• 2010

In this paper, an experimental study on the cooling operation characteristics for different entering water temperatures in geothermal heat pump system are carried out by using Lab VIEW system program Set-point temperature controls for cooling water and supply air temperatures is applied to analyze the energy consumption and control performances. As a result, the system responses show that different entering water temperatures(EWT) effect greatly on the energy consumption and system COP.

• 한국인터넷방송통신학회논문지
• /
• 제15권1호
• /
• pp.25-28
• /
• 2015

건물 내 필수적인 이동수단으로 사용되는 승강기는 비상상황 시, 탈출수단으로 이용될 경우 기대효과가 높기 때문에 많은 연구가 진행되고 있다. 서울특별시 초고층 건축물 가이드라인에서 층수는 지하 7층, 지상 53층, 바닥면적 $6,800m^2$ 연면적 $127,050m^2$, 용도는 문화 및 집회시설 판매시설 업무시설 숙박시설(호텔) 공동주택(아파트)의 건축물을 설계하면서 피난용승강기를 별도로 설치하기에는 효율적이지 못하다는 판단 하에 승용승강기의 설치기준에 따라 설계된 승강기를 피난용으로 사용하기로 결정하였으나 이에 대한 세부 설계지침내용이 아직까지 마련되어 있지 않아[1] 화재 시 공기주입, 스프링클러 가동, 스마트폰연동 탈출 가능한 클라우드 기반 피난유도 승강기시스템을 제안하였다.

• 시스템엔지니어링학술지
• /
• 제5권2호
• /
• pp.27-34
• /
• 2009

This paper analyze technical review entry criteria and review process based on system property, and review checklist to conform technical review is also showed. The execution of review is determined according to the preparation of review item and identification for risk element. Risk level should be mitigated before technical review by appropriate plan. This paper described the entering condition of technical review for developmental phase, and tailoring consideration for technical review condition. Described technical review entry criteria, review process, and tailoring consideration is applied to development of test equipment for ground ant-air missile system. Applied system specific technical review process, tailored entry condition for test equipment for ground ant-air missile system and review check list is showed and the effectiveness of described system specific technical review process is presented.

• 수산해양교육연구
• /
• 제26권5호
• /
• pp.1083-1089
• /
• 2014

The aims of this study are to find out the possibility of the charcoal as a desiccant. The only humidity control under high temperature and high humidity environment can be provided to the thermal comfort at indoor environment. Functionality of charcoal is known to be deodorization, antiseptic effect, filtering effect and humidity control. But research related to humidity control in the country not yet. Thus, the dehumidification capacity of the charcoal experimental results to see the results were as follows : 1) Entering the experimental humidification is 148.02 g/h, 161.05 g/h and 243.2 g/h when air velocity was changed 1.5 m/s, 1.7 m/s and 2.0 m/s. 2) When the basis weight of the charcoal 2.0 m/s air velocity to obtain the largest number of adsorption capacity. 3) Dru bulb temperature and dew point temperature ware measured at front and rear of the charcoal. Absolute humidity is calculated from the measured Dry bulb temperature and dew point temperature. The quantity of dehumidification is calculated from absolute humidity is the largest 129.6 g/h at the air velocity 2.0 m/s.

• 한국전자통신학회논문지
• /
• 제13권5호
• /
• pp.1029-1036
• /
• 2018

본 논문은 캠퍼스환경에서 에너지 절약을 위해 조명 및 공조기기의 최적제어 시스템 개발에 대한 연구이다. 본 연구를 통해 개발 된 제어 시스템의 경우 모션센서와 영상처리를 통해 출입 인원수 파악과 온/습도에 대한 정보로 조명과 에어컨을 제어한다. 또한 데이터 통합 모니터링과 제어 신호에 따른 명령 수행 기능을 통해 제어한 결과들로 에너지 절약을 가능하도록 하였다.

• 대한토목학회논문집
• /
• 제29권6D호
• /
• pp.693-702
• /
• 2009

수도권 지역의 대기오염 배출량은 대부분 교통 부문에서 유발되고 있고, 특히 수도권 지역 미세먼지(PM10) 배출량의 52%와 질소산화물(NOx) 배출량의 59%는 노후 대형경유차에서 배출되고 있는 실정이다. 본 연구는 노후 대형경유차에서 배출되는 대기오염물질 저감을 위한 정책인 환경지역 (노후 대형경유차의 수도권 진입 억제 및 대기오염물질 저감장치 장착)운영전략을 수립하고 이를 평가하였다. 본 연구에서 환경지역 운영전략은 대상지역과 대상차량에 따라 6개 시나리오로 구성되었으며, 각 시나리오는 교통통계자료를 이용하여 평가되었다. 환경지역 운영 전략에 대한 평가 결과, 7년 경과된 노후 경유차의 DPF장착과 1998년식 이전 노후 경유차의 조기폐차 시행방안이 가장 효율적인 것으로 분석되었다. 또한 저공해화 대상차량을 수도권 내 운행차량 기준으로 설정하는 것이 등록차량 기준으로 설정하는 것보다 더 효과적인 것으로 분석되었다.

• Journal of Radiation Protection and Research
• /
• 제48권4호
• /
• pp.167-174
• /
• 2023

Background: A nondestructive test is commonly used to inspect the surface defects and internal structure of an object without any physical damage. X-rays generated from an electron accelerator or a tube are one of the methods used for nondestructive testing. The high penetration of X-rays through materials with low atomic numbers makes it difficult to discriminate between these materials using X-ray imaging. The interaction characteristics of neutrons with materials can supplement the limitations of X-ray imaging in material discrimination. Materials and Methods: The radiation image acquisition process for air-cargo security inspection equipment using X-rays and neutrons was simulated using a GEometry ANd Tracking (Geant4) simulation toolkit. Radiation images of phantoms composed of 13 materials were obtained, and the R-value, representing the attenuation ratio of neutrons and gamma rays in a material, was calculated from these images. Results and Discussion: The R-values were calculated from the simulated X-ray and neutron images for each phantom and compared with those obtained in the experiments. The R-values obtained from the experiments were higher than those obtained from the simulations. The difference can be due to the following two causes. The first reason is that there are various facilities or equipment in the experimental environment that scatter neutrons, unlike the simulation. The other is the difference in the neutron signal processing. In the simulation, the neutron signal is the sum of the number of neutrons entering the detector. However, in the experiment, the neutron signal was obtained by superimposing the intensities of the neutron signals. Neutron detectors also detect gamma rays, and the neutron signal cannot be clearly distinguished in the process of separating the two types of radiation. Despite these differences, the two results showed similar trends and the viability of using simulation-based radiation images, particularly in the field of security screening. With further research, the simulation-based radiation images can replace ones from experiments and be used in the related fields. Conclusion: The Korea Atomic Energy Research Institute has developed air-cargo security inspection equipment using neutrons and X-rays. Using this equipment, radiation images and R-values for various materials were obtained. The equipment was reconstructed, and the R-values were obtained for 13 materials using the Geant4 simulation toolkit. The R-values calculated by experiment and simulation show similar trends. Therefore, we confirmed the feasibility of using the simulation-based radiation image.

• 설비공학논문집
• /
• 제24권2호
• /
• pp.102-110
• /
• 2012

The objective of this study is to improve the performance of a hybrid ground source heat pump (HGSHP) by optimizing the flow distribution ratio of secondary fluid flow rate between a ground loop and a supplemental loop. Initially, a conventional ground source heat pump (GSHP) was tested to determine an optimum flow rate of the secondary fluid. Based on the selected optimum value, the HGSHP was also tested by varying the flow distribution ratio of the secondary fluid flow rate between the ground loop and the supplemental loop, such as 9:1, 7:3, 5:5, and 3:7. The results showed that the optimum flow distribution ratio of the secondary fluid flow rate was 7:3. The COP of the HGSHP was improved by 19% over the GSHP at a flow distribution ratio of 7:3 and an entering water temperature of $40^{\circ}C$.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.48-53
• /
• 2014

Rocket, held using the CCA for the mission, a plurality of recording devices, and navigation equipment. In case of a projectile which is entered the water after fired into the air, after performing stages and fairing separated in flight to enter the underwater. It is caused by the explosion of gunpowder mainly, vibration phenomenon of a large transition is induced structurally very, also on entering the water, have a significant shock structurally separated. If shock is transmitted directly to the CCA through the body, it can be caused malfunction of payloads, resulting in failure of the mission of the projectile. In order to ensure the stability against shock, in this paper, Calculating a target resonacne frequency of the CCA, and verified through modal test and analysis. Maximum acceleration position of CCA is checked by SRS analysis. In addition, effectiveness of shock isolation system through shock analysis.

• 한국해양공학회지
• /
• 제23권4호
• /
• pp.64-68
• /
• 2009

It has been observed that coated steel structures deteriorate more rapidly than the designed lifetime due to acid rain caused by air pollution, etc. Therefore, improving the corrosion resistance of anti-corrosive paint is very important in terms of safety and the economic point of view. In this study, the corrosion resistance of five kinds of anti-corrosive paints, including the Acryl, Fluorine, and Epoxy resin series, were investigated with electrochemical methods, such as corrosion potential measurements, polarization curves, diffusion limiting current density, etc. As a result, the corrosion resistance of the F101 specimen with the fluorine resin series was found to be superior to the other specimens, while E100 with the epoxy resin series also showed a somewhat good corrosion resistance. Furthermore, it was observed that the amount of water and oxygen entering the inner side of a painted film increased with an increase in immersion time, irrespective of the kind of resin series. However, the oxygen diffusion limiting current density of a specimen with good corrosion resistance was relatively decreased compared to other specimens, because of the difficulty of oxygen diffusion penetrating to the inner side of the film. Consequently it is suggested that we can qualitatively evaluate the corrosion resistance of an anti-corrosive paint by measuring the diffusion limiting current density as an electrochemical method.