• 제목/요약/키워드: Engineering Framework

검색결과 4,820건 처리시간 0.034초

표면반발경도 활용 콘크리트 동해손상과 염분 침투 가속효과의 상관관계 분석 (Analysis of Correlation between Freeze-Thaw Damage on Concrete and Chloride Penetration Acceleration Effect Using Surface Rebound Value)

  • 박지선;이종석
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제26권6호
    • /
    • pp.148-156
    • /
    • 2022
  • 대부분의 국내 콘크리트 구조물이 동결융해 및 염해 환경에 동시에 노출됨에도 불구하고 현장에서의 콘크리트 내구성능 평가는 각각의 단일 작용에 의한 손상을 평가하고 있으며 염해 손상은 현장에서 코어를 별도로 채취하여 추가적인 실내 실험분석까지 요구된다. 그러나 국내에서는 2018년부터 「시설물의 안전 및 유지관리에 관한 특별법」과 「지속가능한 기반시설 관리 기본법」 등의 시설물 유지관리를 강화하는 정책들이 수립 및 시행됨에 따라 정부 및 지자체에서 안전점검 관리 대상시설물이 증대되어 시설물이 안전 점검 및 진단에 대한 효과적인 점검 간소화 기술이 필요한 실정이다. 따라서 이 연구에서는 기존의 피복부 콘크리트 품질을 평가하는 표면반발경도를 활용하여 동해 손상이 발생한 콘크리트 부위를 대상으로 염해 손상의 가속화 정도를 판단할 수 있는 방법의 가능성을 평가하고자 하였다. 이를 위하여 동결융해 촉진 환경에 노출시켜 이미 동해 손상이 발생한 콘크리트 실험체를 염수에 침지시킨 후 콘크리트 내 침투한 염화물을 분석하여 동해 손상 정도에 따른 염화물 침투 가속화 관계를 분석하였다.

Ecological flow calculations and evaluation techniques: Past, present, and future

  • LIU Yang;Wang Fang
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2023년도 학술발표회
    • /
    • pp.28-28
    • /
    • 2023
  • Most countries worldwide are finding it difficult to make decisions regarding the utilization of water resources and the ecological flow protection of rivers because of serious water shortages and global climate warming. To overcome this difficulty, accurate ecological flow processes and protected ecological objectives are required. Since the introduction of the concept, ecological flow calculations have been developed for more than 60 years. This technical development has always been dominated by countries such as the United States, Australia, and the United Kingdom. The technical applications, however, vary substantially worldwide. Some countries, for instance, did not readjust the method because of a lack of understanding of the ecological effect or because they failed to achieve elaborate scheduling. Mostly, readjustments were not made because the users could not make their choices from among numerous methods for ecological flow. This paper presents three research results based on a systematic review of 240 methods with clear connotation boundaries. First, the ecological flow algorithm was developed along with the scientific and technological progress in the river ecosystem theory, ecohydrological relationship, and characterization and simulation of hydrological and hydrodynamic processes. In addition, the basis of the method has evolved from the hydrological process of the ecosystem, hydraulics-habitat conditions, and social development interference to whole ecosystem simulation. Second, 240 methods were classified into 50 sub-categories to evaluate their advantages and disadvantages according to the ecological flow algorithms of hydrology, hydraulics, habitat, and other comprehensive methods. According to this evaluation, 60% of the methods were not suitable for further application, including the method based on the percentage of natural runoff. Furthermore, the applicability of the remaining methods was presented according to the evaluation based on the aspects of allocation of water resources, water conservancy project scheduling, and river ecological evaluation. Third, In the future, most developing countries should strengthen the guarantee of high-standard ecological flow via a coordination mechanism for the ecological flow guarantee established under a sustainable framework or via an ecological protection pattern at the national level according to the national system. Concurrently, a reliable ecological flow demand process should also be established on the basis of detailed investigation and research on the relationship between river habitats, ecological hydrology, and ecological hydraulics. This will ensure that the real-time evaluation of ecological flow forces the water conservancy project scheduling and accurate allocation of water.

  • PDF

부동산 유동화 NFT와 FT 분할 거래 시스템 설계 및 구현 (Real Estate Asset NFT Tokenization and FT Asset Portfolio Management)

  • 김영근;김성환
    • 정보처리학회논문지:소프트웨어 및 데이터공학
    • /
    • 제12권9호
    • /
    • pp.419-430
    • /
    • 2023
  • 대체 불가능 토큰 (NFT: non-fungible Token)은 분할할 수 없다는 고유한 특징을 가지고 있다. 현재 NFT는 디지털 콘텐츠에 대한 소유권 증명 이상의 용도가 명확하지 않고, 토큰의 유동성이 거의 없으며, 이로 인한 가격의 예측이 어렵다. 현실에서의 부동산은 대개 가격이 매우 높은 특징으로 인해 투자 진입장벽이 매우 높다. 현물 부동산을 NFT 화하고, FT (fungible token)으로 분할하면 유동성의 증가, 접근성의 증가에 따른 투자자 커뮤니티 볼륨의 증가를 기대할 수 있다. 본 논문은 일반 투자자들이 개별적으로 구매하기 어려운 현물 부동산을 대량의 FT로 분할하고 이를 Black Litterman 모델 기반의 Portfolio 투자 인터페이스를 통해 투자할 수 있는 시스템을 설계하고 구현하였다. 이를 위해, 현물 부동산을 담보로 페깅하고, 보안적으로 안전한 블록체인인 NFT로 발행한다. 상시 변경되는 부동산 가격을 모니터링하기 위한 오라클을 사용하여, 외부 부동산 정보를 블록체인에 반영할 수 있도록 하였다. 현물 부동산 가격을 그대로 유지하고 있는 NFT를 낮은 가격의 대량 FT로 분할함으로써, 큰 유동성을 제공하고 가격 변동성 제한을 두었다. 이를 통해, 높은 가격으로 인해 투자하기 어려웠던 일반 소액 투자자들이 쉽게 투자할 수 있도록 하였다. 또한 소액 투자로 여러 개의 복수 현물 부동산에 투자하기 위한 효과적인 포트폴리오 구성을 위한 자산 포트폴리오 인터페이스를 구현하였다. 이는 Black Litterman 모델을 활용하여, 다수의 현물 부동산 NFT에 대한 투자 비율을 최적화할 수 있는 목적을 가진다. 전체 시스템은 Solidity 언어로 작성한 smart contract, Flask 웹 프레임워크, 공공데이터포털의 "국토교통부_아파트매매 실거래자료 Open API"를 활용하였다.

심부 시추코어 실험실 분석자료와 탄성파 탐사자료 통합 분석을 통한 대한해협 천부 퇴적층 임피던스 도출 (P-Impedance Inversion in the Shallow Sediment of the Korea Strait by Integrating Core Laboratory Data and the Seismic Section)

  • 정순홍;이광수;손우현;김길영;유동근;최윤석
    • 지구물리와물리탐사
    • /
    • 제26권3호
    • /
    • pp.138-149
    • /
    • 2023
  • 해저지층의 지질특성을 파악하는 것은 지구과학 및 공학에서 중요한 과업으로 신뢰도 높은 탐사자료를 확보하는 경우 가능하다. 대한민국 남동해역 대한해협 천부 지층의 특성을 파악하기 위하여 심부 시추 지층물성 실험실 분석자료와 탄성파 탐사자료를 확보하였고, 이를 통합 분석하였다. 해저면 심도 200 m 하부까지 심부 시추코어를 회수하여 천부 지층 탄성파 음파속도 로그를 얻었고, 탄성파 단면과 대비하였다. 지층 음파속도 로그와 시간 영역 탄성파 자료는 시간-심도 변환을 수행하여 상관성이 15%에서 45%로 증가하였다. 탄성파 임피던스 초기모형을 설정하고 모형기반, 대역제한 및 산재쐐기 역산을 각각 수행하여 결과를 비교하였다. 도출된 탄성파 임피던스는 천부 지층 내부 퇴적층이 우세한 영역과 미고결 영역에서 변화되는 양상을 보였다. 본 연구에서 수행된 음파 임피던스 역산 기법은 향후 지층 물성분석 로그자료와 탄성파자료의 추가 확보 시 통합 분석을 위한 프레임워크로, 임피던스 분포 단면은 해저면 단층 규명과 천부가스 누출 탐지 등에 활용 가능하다. 국내 해양 심부 시추는 이산화탄소 저장 후보지 특성 파악과 자원 부존 평가 등을 목적으로 지속 추진되고 있으므로 통합 역산의 지구물리 분야 적용 가치가 높아질 것으로 기대된다.

Experimental assessment of thermal radiation effects on containment atmospheres with varying steam content

  • R. Kapulla;S. Paranjape;U. Doll;E. Kirkby;D. Paladino
    • Nuclear Engineering and Technology
    • /
    • 제54권11호
    • /
    • pp.4348-4358
    • /
    • 2022
  • The thermal-hydraulics phenomena in a containment during an accident will necessarily include radiative heat transfer (i) within the gas mixture due to the high radiative absorption and emission of steam and (ii) between the gas mixture and the surrounding structures. The analysis of some previous PANDA experiments (PSI, Switzerland) demonstrated the importance of the proper modelling of radiation for the benefit of numerical simulations. These results together with dedicated scoping calculations conducted for the present experiments indicated that the radiative heat transfer is considerable, even for a very low amount of steam (≈2%). The H2P2 series conducted in the large-scale PANDA facility at the Paul-Scherrer-Institut (PSI) in the framework of the OECD/NEA HYMERES-2 project is intended to enhance the understanding of thermal radiation phenomena and to provide a benchmark for corresponding numerical simulations. Thus, the test matrix was tailored around the two opposite extremes: either gas compositions with small steam content such that radiative heat transfer phenomena can be neglected. Or gas mixtures containing larger amounts of steam, so that radiative heat transfer is expected to play a dominant role. The H2P2 series consists of 5 experiments designed to isolate the radiation phenomena from convective and diffusive effects as much as possible. One vessel with a diameter of 4 m and a height of 8 m was preconditioned with different mixtures of air / steam at room and elevated temperatures. This was followed by the build-up of a stable helium stratification at constant pressure in the upper part of the vessel. After that, helium was injected from the top into the vessel which leads to an increase of the vessel pressure and a corresponding elevation-dependent and transient rise of the gas temperature. It is shown that even the addition of small amounts of steam in the initial gas atmosphere considerably impacts the radiative heat transport throughout all phases of the experiments and markedly influences i) the monitored gas peak temperature, ii) the temperature history during the compression and iii) the following relaxation phase after the compression was stopped. These PANDA experiments are the first of its kind conducted in a large scale thermal-hydraulic facility.

A cosmic ray muons tomography system with triangular bar plastic scintillator detectors and improved 3D image reconstruction algorithm: A simulation study

  • Yanwei Zhao;Xujia Luo;Kemian Qin;Guorui Liu;Daiyuan Chen;R.S. Augusto;Weixiong Zhang;Xiaogang Luo;Chunxian Liu;Juntao Liu;Zhiyi Liu
    • Nuclear Engineering and Technology
    • /
    • 제55권2호
    • /
    • pp.681-689
    • /
    • 2023
  • Purpose: Muons are characterized by a strong penetrating ability and can travel through thousands of meters of rock, making them ideal to image large volumes and substances typically impenetrable to, for example, electrons and photons. The feasibility of 3D image reconstruction and material identification based on a cosmic ray muons tomography (MT) system with triangular bar plastic scintillator detectors has been verified in this paper. Our prototype shows potential application value and the authors wish to apply this prototype system to 3D imaging. In addition, an MT experiment with the same detector system is also in progress. Methods: A simulation based on GEANT4 was developed to study cosmic ray muons' physical processes and motion trails. The yield and transportation of optical photons scintillated in each triangular bar of the detector system were reproduced. An image reconstruction algorithm and correction method based on muon scattering, which differs from the conventional PoCA algorithm, has been developed based on simulation data and verified by experimental data. Results: According to the simulation result, the detector system's position resolution is below 1 ~ mm in simulation and 2 mm in the experiment. A relatively legible 3D image of lead bricks in size of 20 cm × 5 cm × 10 cm used our inversion algorithm can be presented below 1× 104 effective events, which takes 16 h of acquisition time experimentally. Conclusion: The proposed method is a potential candidate to monitor the cosmic ray MT accurately. Monte Carlo simulations have been performed to discuss the application of the detector and the simulation results have indicated that the detector can be used in cosmic ray MT. The cosmic ray MT experiment is currently underway. Furthermore, the proposal also has the potential to scan the earth, buildings, and other structures of interest including for instance computerized imaging in an archaeological framework.

신경망 기반 비디오 압축을 위한 레이턴트 정보의 방향 이동 및 보상 (Latent Shifting and Compensation for Learned Video Compression)

  • 김영웅;김동현;정세윤;최진수;김휘용
    • 방송공학회논문지
    • /
    • 제27권1호
    • /
    • pp.31-43
    • /
    • 2022
  • 전통적인 비디오 압축은 움직임 예측, 잔차 신호 변환 및 양자화를 통한 하이브리드 압축 방식을 기반으로 지금까지 발전해왔다. 최근 인공 신경망을 통한 기술이 빠르게 발전함에 따라, 인공 신경망 기반의 이미지 압축, 비디오 압축 연구 또한 빠르게 진행되고 있으며, 전통적인 비디오 압축 코덱의 성능과 비교해 높은 경쟁력을 보여주고 있다. 본 논문에서는 이러한 인공 신경망 기반 비디오 압축 모델의 성능을 향상시킬 수 있는 새로운 방법을 제시한다. 기본적으로는 기존 인공 신경망 기반 비디오 압축 모델들이 채택하고 있는 변환 및 복원 신경망과 엔트로피 모델(Entropy model)을 이용한 율-왜곡 최적화(Rate-distortion optimization) 방법을 사용하며, 인코더 측에서 디코더 측으로 압축된 레이턴트 정보(Latent information)를 전송할 때 엔트로피 모델이 추정하기 어려운 정보의 값을 이동시켜 전송할 비트량을 감소시키고, 손실된 정보를 추가로 전송함으로써 손실된 정보에 대한 왜곡을 보정한다. 이러한 방법을 통해 기존의 인공 신경망 기반 비디오 압축 기술인 MFVC(Motion Free Video Compression) 방법을 개선하였으며, 실험 결과를 통해 H.264를 기준으로 계산한 BDBR (Bjøntegaard Delta-Bitrate) 수치(%)로 MFVC(-14%) 보다 두 배 가까운 비트량 감축(-27%)이 가능함을 입증하였다. 제안된 방법은 MFVC 뿐 아니라, 레이턴트 정보와 엔트로피 모델을 사용하는 신경망 기반 이미지 또는 비디오 압축 기술에 광범위하게 적용할 수 있다는 장점이 있다.

증강현실 시각화를 위해 K-최근접 이웃을 사용한 BIM 메쉬 경량화 알고리즘 (BIM Mesh Optimization Algorithm Using K-Nearest Neighbors for Augmented Reality Visualization)

  • 빠 빠 윈 아웅;이동환;박주영;조민건;박승희
    • 대한토목학회논문집
    • /
    • 제42권2호
    • /
    • pp.249-256
    • /
    • 2022
  • 최근 BIM (Building Information Modeling)과 AR (Augmented Reality)을 결합한 실시간 시각화 기술이 건설관리 의사 결정 및 처리 효율성을 높이는 데 도움이 된다는 것을 보여주기 위한 다양한 연구가 활발히 진행되고 있다. 그러나, 대용량 BIM 데이터는 AR에 적용할 경우 데이터 전송 문제, 이미지 단절, 영상 끊김 등과 같은 다양한 문제가 발생함으로 3차원(3D) 모델의 메쉬 최적화를 통해 시각화의 효율성을 향상시켜야 한다. 대부분의 기존 메쉬 경량화 방법은 복잡하고 경계가 많은 3D 모델의 메쉬를 적절하게 처리할 수 없다. 이에 본 연구에서는 고성능 AR 시각화를 위해 BIM 데이터를 재구성하기 위한 k-최근접이웃(KNN) 분류 프레임워크 기반 메쉬 경량화 알고리즘을 제안하였다. 제안 알고리즘은 선정된 BIM 모델을 삼각형 중심 개념 기반의 Unity C# 코드로 경량화하였고 모델의 데이터 세트를 활용하여 정점 사이의 거리를 정의할 수 있는 KNN로 분류되었다. 그 결과 전체 모델과 각 구조의 경량화 메쉬 점 및 삼각형 개수가 각각 약 56 % 및 약 42 % 감소됨을 확인할 수 있었다. 결과적으로, 원본 모델과 비교했을 때 경량화한 모델은 시각적인 요소 및 정보 손실이 없었고, 따라서, AR 기기 활용 시 고성능 시각화를 향상시킬 수 있을 것으로 기대된다.

다지점 일강수 모의를 위한 추계학적 강수모의모형의 구축 (Development of a Stochastic Precipitation Generation Model for Generating Multi-site Daily Precipitation)

  • 정대일
    • 대한토목학회논문집
    • /
    • 제29권5B호
    • /
    • pp.397-408
    • /
    • 2009
  • 본 연구에서는 다지점의 일단위 강수량을 동시에 모의할 수 있는 추계학적 강수모의모형을 제시하였다. 각 지점의 강수발생은 무강수 기간에 대해 고차를 허용하는 혼합차수 마코프 모형을 이용하였으며, 강수량은 Anscombe 잔차와 감마분포를 이용하여 모의하였다. 다지점에 대한 강수발생과 강수량의 공간적 상관관계는, 상관관계를 가진 랜덤자료를 생성하여 재현하였다. 구축된 강수모의모형을 이용하여 우리나라 중부지역에 위치한 17개 관측지점의 강수량을 모의하고 모의정확성을 검토 하였다. 검증에 필요한 통계값들은 50번의 반복실행에 의해 생성된 강수량 시계열로부터 추정하여 제시하였다. 검토결과, 강수모의모형이 관측강수의 강수일수, 강수 지속기간, 무강수 지속기간, 강수일의 평균강수량과 표준편차 등을 비교적 잘 모의 하였다. 최대 강수 지속일과 무강수 지속일의 50번 반복실행의 평균값의 RMSE는 관측자료 평균값의 약 23% 정도, 100년 빈도와 200년빈도의 강수량의 RMSE는 관측자료 평균값의 약 17% 정도에 달하는 것으로 확인되었다. 강우발생과 강우량에 대한 공간적 상관관계는 비교적 정확히 재현하고 있음을 확인하였다.

LRFD 설계를 위한 국내 항타강관말뚝의 저항계수 산정 (Resistance Factors of Driven Steel Pipe Piles for LRFD Design in Korea)

  • 박재현;허정원;김명모;곽기석
    • 대한토목학회논문집
    • /
    • 제28권6C호
    • /
    • pp.367-377
    • /
    • 2008
  • 국내 기초구조물에 대한 하중저항계수설계법 개발의 일환으로 신뢰성에 기반한 항타강관말뚝의 저항계수를 산정하였다. 국내 정재하시험 및 지반조사 자료를 수집, 분석하여 측정 지지력 확인이 가능한 57개 자료에 대해서 선단부 N치 50을 기준으로 두 그룹으로 분류하였다(N<50, $N{\geq}50$). 구조물기초설계기준에서 제안하고 있는 두 가지 정역학적 설계공식에 대해서 대표 측정지지력과 설계지지력을 비교함으로써 저항편향계수를 평가하였다. 저항편향계수의 통계특성을 이용하여 일차신뢰도법 및 몬테카를로 시뮬레이션에 의한 엄밀한 신뢰성 분석을 실시하였다. 신뢰성 분석 결과 및 국내 말뚝기초의 설계, 시공 실무 특성을 종합적으로 고려하여 목표 신뢰도지수를 결정하였다. 무리말뚝의 여용성을 적용할 수 있는 경우 2.0, 2.33, 무리말뚝의 여용성을 적용할 수 없는 경우 2.5의 목표 신뢰도지수를 결정하였고, 일차신뢰도법 및 몬테카를로 시뮬레이션을 적용하여 저항계수를 산정하였다.