• Journal of Sensor Science and Technology
• /
• v.22 no.1
• /
• pp.38-43
• /
• 2013

In this study, the artery's compliance model and the pulsation waveform model was proposed to estimate blood pressure without applying HPF (High Pass Filter) on signal measured by the oscillometric method. The method proposed in the study considered two ways of estimating blood pressure. The first method of estimating blood pressure is by comparing and analyzing changes in pulsation waveform's dicrotic notch region during each cardiac period. The second method is by comparing and analyzing morphological changes in the pulsation waveform during each cardiac period, which occur in response to the change in pressure applied on the cuff. To implement these methods, we proposed the compliance model and the pulsation waveform model of the artery based on hemodynamic theory, and then conducted various simulations. The artery model presented in this study only took artery's compliance into account. Then, a pulsation waveform model was suggested, which uses characteristic changes in the pulsation waveform to estimate blood pressure. In addition, characteristic changes were observed in arterial volume by applying artery's pulsation waveform to the compliance model. The pulsation waveform model was suggested to estimate blood pressure using characteristic changes of the pulsation waveform in the arteries. This model was composed of the sum of sine waves and a Fourier's series in combination form up to 10th harmonics components of the sinusoidal waveform. Then characteristic of arterial volume change was observed by inputting pulsation waveform into the compliance model. The characteristic changes were also observed in the pulsation waveform by mapping the arterial volume change in accordance with applied cuff's pressure change to the pulsation waveform's change according to applied pressure changes by cuff. The systolic and diastolic blood pressures were estimated by applying positional change of pulsation waveform's dicrotic notch region.

• The korean journal of orthodontics
• /
• v.48 no.3
• /
• pp.172-181
• /
• 2018

Objective: This study was performed to investigate buccal facial depth (BFD) changes after extraction and nonextraction orthodontic treatments in post-adolescent and adult female patients, and to explore possible influencing factors. Methods: Twelve and nine female patients were enrolled in the extraction and nonextraction groups, respectively. Changes in BFD in the defined buccal region and six transverse and two coronal measuring planes were measured after registering pretreatment and posttreatment three-dimensional facial scans. Changes in posterior dentoalveolar arch widths were also measured. Treatment duration, changes in body mass index (BMI), and cephalometric variables were compared between the groups. Results: BFD in the buccal region decreased by approximately 1.45 mm in the extraction group, but no significant change was observed in the nonextraction group. In the extraction group, the decrease in BFD was identical between the two coronal measuring planes, whereas this differed among the six transverse measuring planes. Posterior dentoalveolar arch widths decreased in the extraction group, whereas these increased at the second premolar level in the nonextraction group. The treatment duration of the extraction group was twice that of the nonextraction group. No differences were found in BMI and Frankfort horizontal-mandibular plane angle changes between the groups. BFD changes in the buccal region moderately correlated with treatment duration and dental arch width change. Conclusions: BFD decreased in adult female patients undergoing extraction, and this may be influenced by the long treatment duration and constriction of dentoalveolar arch width. However, nonextraction treatment did not significantly alter BFD.

• The KIPS Transactions:PartD
• /
• v.19D no.1
• /
• pp.39-48
• /
• 2012

In order to quickly understand which changes of source codes have been made and to perform effective maintenance of a system, it is important to visualize the changed parts. Although there are many works for analyzing software changes, there are few works for visualizing both of the change types and change quantifications for Java based systems. In this paper, we propose a change analysis technique based on class diagram and provide a change visualization technique by using change quantification information. In order to check the structural changes in source codes, source codes are transformed to class diagrams by reverse engineering methods. On the class diagrams, the changes are analyzed and quantified by numbers. Based on the change quantification, the changes are visualized on the class diagram by color spectrum. By using visualization techniques, maintainers can easily recognize the code changes to reduce the cost and time of maintenance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.892-895
• /
• 2005

This study investigated changes of mechanical characteristics in the trabecular and cortical bone of the lumbar vertebrae of the ovariectomised(OVX) rat. In previous researches, there were many studies for morphology of osteoporotic bones based on Micro-CT (Micro - Computed Tomography). However, there were few studies for detecting and tracking changes of mechanical characteristics in the trabecular bone and cortical bone of the lumbar vertebrae for the OVX rat. For this study, one female Sprague-Dawley rat was used: an OVX rat. The 4th lumbar of the OVX rat was utilized as a specimen. Detecting and tracking changes of mechanical characteristics could be investigated in the trabecular and cortical bone of the lumbar vertebrae for an OVX rat using In-vivo Micro-CT. An OVX rat was scanned at week 0 (just before surgery), at week 4, and week 8 after surgery. Micro finite element(${\mu}\;FE$) analysis was used to investigate mechanical characteristics in the trabecular and cortical bone of the lumbar vertebrae for an OVX rat.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1196-1202
• /
• 2009

In this paper, an estimator design of underwater environment changes is proposed by using observer techniques for ROV control system. The underwater environment changes are considered as an external disturbance term for ROV model and it is added into the input term of ROV model. To estimate the environment changes, a PI observer which does not effect the external disturbance input term is proposed. To verify the effectiveness of the proposed method, the step and the sinusoidal environment changes are considered in simulation. The proposed method will be applied to design the haptic controller for ROV in future.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.2
• /
• pp.71-79
• /
• 2014

Climate change has been social and environmental issues, it typically indicates the trend changes of not only temperature but also rainfall. There is a need to consider climate changes in a long-term soil erosion estimation since soil loss in a watershed can be varied by the changes of rainfall intensity and frequency of torrential rainfall. The impacts of rainfall trend changes on soil loss, one of climate changes, were estimated using Sediment Assessment Tool for Effective Erosion Control (SATEEC) employing L module with current climate scenario and future climate scenario collected from the Korea Meteorological Administration. A 62 $km^2$ watershed was selected to explore the climate changes on soil loss. SATEEC provided an increasing trend of soil loss with the climate change scenarios, which were 182 ton/ha/year in 2010s, 169 ton/ha/year in 2020s, 192 ton/ha/year in 2030s,182 ton/ha/year in 2040s, and 218 ton/ha/year in 2050s. Moreover, it was found that approximately 90% of agricultural area in the watershed displayed the soil loss of 50 ton/ha/year which is exceeding the allow able soil loss regulation by the Ministry of Environment.

• Journal of Korea Multimedia Society
• /
• v.21 no.5
• /
• pp.609-616
• /
• 2018

In this paper, we designed a multimodal bio-signal measurement system to observe changes in the brain nervous system and vascular system during sleep. Changes in the nervous system and the cerebral blood flow system in the brain during sleep induce a unique correlation between the changes in the nervous system and the blood flow system. Therefore, it is necessary to simultaneously observe changes in the brain nervous system and changes in the blood flow system to observe the sleep state. To measure the change of the nervous system, EEG, EOG and EMG signal used for the sleep stage analysis were designed. We designed a system for measuring cerebral blood flow changes using functional near-infrared spectroscopy. Among the various imaging methods to measure blood flow and metabolism, it is easy to measure simultaneously with EEG signal and it can be easily designed for miniaturization of equipment. The sleep stage was analyzed by the measured data, and the change of the cerebral blood flow was confirmed by the change of the sleep stage.

• Journal of Construction Engineering and Project Management
• /
• v.2 no.1
• /
• pp.5-13
• /
• 2012

The lacks of local workforce supply become a problematic in Malaysian construction industry. Meanwhile, HRP is important during workforce supply to help organizations in order to appoint the right people in the right job. This paper reports on the use of factors influencing HRP towards local workforce supply in the construction industry in general, and Malaysian construction in particular. Semi structured interviews were conducted to 10 interviewees from the government and non-government organizations to investigate current issues of local workforce and the practices of HRP in the construction organization. The analysis methods were based on descriptions of previous tested research. The findings reveal that the lack of local workforce is due to low wages system, safety issues, educational changes, low status and unsecured work, environment in construction industry, developments and technologies changes in Malaysia. The internal factors of HRP were practiced among construction organization are organization strategy, organizational culture, organization changes, leadership and experience, nature of work and empowerment of labor. Meanwhile, the external factors are technology changes, economic changes, legislation and demographic changes. The paper provides valuable information on the practices of factors influencing HRP for local workforce supply in Malaysian construction industry.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.540-553
• /
• 2007

Strategic management of changes is very significant for all types of construction projects. Project management teams must have the ability to respond to changes effectively in order to minimize their adverse impact on the project. The study focuses on the causes, their frequent effects and effective controls for changes in educational building projects. To achieve the study objectives, a questionnaire survey was carried out to collect relevant information. Through the literature review, 53 causes, 16 effects and 30 potential controls for change orders were identified. These provided the basis for the formulation of the questionnaire. Responses from 92 professionals who were involved in the educational projects in Singapore were analyzed. They included 28 developers, 33 consultants and 31 contractors. From the survey findings, the most important causes of changes were identified. The study revealed the most frequent effects and most effective controls for each cause of change order. Arising therefrom, a comprehensive tabulation of the 53 causes and their frequent effects and effective controls was also developed. A timeline for implementing the controls was developed through in-depth interviews with the professionals. The study would assist building professionals in taking proactive measures for reducing change orders for educational buildings; furthermore, the timeline would also be helpful for them to implement controlling strategies at the appropriate time. Recommendations were suggested based on the research findings.

• Journal of Biomedical Engineering Research
• /
• v.28 no.6
• /
• pp.721-726
• /
• 2007

The study relates to achievement and analysis of 3-dimensional spatial pulse wave archived by a spatially arterial pulse diagnostic apparatus (SAPDA), wherein a pulse sensing part array consists of multiple hall devices and is located over a skin contacting part which consists of a magnetic material. When a radially arterial pulse is transferred to the magnetic material, which is contacted skin that results in changes in a magnetic field of the lower part of the pulse sensing part array, the changes in a magnetic field can be detected by the commercial Hall semiconductor device of the pulse sensing part array. Finally, according to development of SAPDA, the 3-dimensionally arterial pulse waveform can be measured noninvasively by detecting the changes of the magnetic field.