• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.10-15
• /
• 2016

This research was conducted structural analysis in order to analyze the impact of the gear in Urea pump when the water is frozen. Subject of study, gear was designed nine models, this gear is a spur gear, located in pump. Contact conditions and rotation conditions were set the gear's condition of restriction. Given 136 MPa pressure to external gear by water was set to the applied stress. The performing result of structural analysis, maximum stress and strain are appeared between two gears. At the same diameter, strain and stress are decreased gradually thicker. Because of the little part in crevice between gears, this parts of gears could be obtained conclusion to be generated maximum stress and strain.

• Journal of Biosystems Engineering
• /
• 제34권2호
• /
• pp.89-94
• /
• 2009

Aerial application using an agricultural unmanned helicopter was suggested for an alternative against current pesticide application methods. Centrifugal clutches play important roles in the performance and safety of the helicopter operation. A previous study analyzed and verified the power transfer theory of the guide type centrifugal clutch. Based on the clutch theory, optimal designs of the clutch became possible and feasible using a simulation method. Design criteria of the clutch were the power transfer capacity of 24.66 kW(33.5 PS) at the rated engine speed and the engaging range speed of 3,000${\sim}$3,500 rpm. Various designs were accomplished using the simulation. An optimal clutch was simulated by determining the values of spring constant and mass of friction sector, which were 94,700 N/m and 123.7 g, respectively. The design performed the power capacity of 24.86 kW(33.8 PS) and engagement speed of 3,069 rpm, meeting the design criteria. Using the designed clutch, an efficient transfer of the power would be possible for the unmanned agricultural helicopter.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.898-904
• /
• 2016

In this study, we have dealt with a design characteristic of outer-rotor type permanent magnet (PM) motor applied for Engine Cooling Fan (ECF). When we design a motor with structure like this type, it is required as a requisite to consider 3-Dimensional (3-D) effect by implementing a non-linear Finite Element Analysis (FEA) due to a yoke-ceiling, which is perpendicular to the axis of rotation. We have analyzed identical models under three different conditions. The analysis has been performed through a non-linear 2-Dimensional (2-D) and 3-D FEA. Finally, the results have been compared with Back Electro-Motive Force (BEMF) value of actual motor model. As a result, a yoke-ceiling function as an additional flux path and the operating point on B-H curve of rotor material is shifted to non-saturation region relatively. Accordingly, magnetic flux linkage can be increased and motor size can be decreased under same input condition to satisfy ECF specification, such as torque.

• 한국기계가공학회지
• /
• 제18권6호
• /
• pp.69-75
• /
• 2019

In recent years, the driving performance and exhaust sound quality in automobiles have been recognized as important factors, as they maximize the driving fun to fulfil the demands of customers. Therefore, many automobile manufacturers are studying various exhaust pipe shapes to improve sound quality and optimize exhaust pressure. The objective of the exhaust pipe design is to maximize the engine efficiency using optimal exhaust pressure settings. In this study, an exhaust system was fabricated with different junction shapes, and the results were analyzed through various experiments. The exhaust gas pressure acting inside the exhaust pipe was measured using a pressure transducer. Meanwhile, the vibration generated in the vehicle was measured in three axial directions and analyzed. The ground noise generated in the indoor and outdoor of the vehicle was measured, and the noise generated at the maximum output was measured and analyzed.

• 드라이브 ㆍ 컨트롤
• /
• 제20권3호
• /
• pp.9-14
• /
• 2023

In this paper, the selection of a reliable accelerated life test code for a 2-ton forklift was accomplished by choosing the driving resistance coefficient failure-free test time based on a 10,000-hour B₁₀ life. The overall life and average equivalent load of the vehicle were then calculated based on actual driving test conditions using the selected driving resistance coefficient. The gear train's accelerated life test code was selected by adjusting the equivalent load to a torque and rotation speed that did not exceed 125%(about 75HP) of the vehicle rated power. The safety of the test standards was validated by conducting an actual accelerated life test utilizing the proposed test method in this study and comparing the test result with the corresponding theoretical value. It is anticipated that the reliability of the accelerated life test in this paper will be enhanced, by incorporating actual driving performance data collected directly from the forklift and adjusting the conditions used in developing the accelerated life test code.

• Computers and Concrete
• /
• 제33권1호
• /
• pp.91-102
• /
• 2024

Beam-shaped components commonly rotate along a fixed axis when massive mechanical structures like rotors, jet engine blades, motor turbines, and rotating railway crossings perform their functions. For these structures to be useful in real life, their mechanical behavior is essential. Therefore, this is the first article to use the modified shear deformation theory type hyperbolic sine functions theory and the FEM to study the static bending response of rotating functionally graded GPL-reinforced composite (FG-GPLRC) beams with initial geometrical deficiencies in thermal media. Graphene platelets (GPLs) in three different configurations are woven into the beam's composition to increase its strength. By comparing the numerical results with those of previously published studies, we can assess the robustness of the theory and mechanical model employed in this study. Parameter studies are performed to determine the effect of various geometric and physical variables, such as rotation speed and temperature, on the bending reactions of structures.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1435-1439
• /
• 2004

Most recently, CP(Cellular Phone) has been one of the most important technologies in the IT(Information Tech-nology) field, and it is situated in a position of great importance industrially and economically. To produce the best CP in the world, a new technological concept and its advanced implementation technique is required, due to the extreme level of competition in the world market. The RT(Robot Technology) has been developed as the next generation of a future technology. Current robots require advanced technology, such as soft computing, human-friendly interface, interaction technique, speech recognition, object recognition etc. unlike the industrial robots of the past. Therefore, this paper explains conceptual research for development of the RCP(Robotic Cellular Phone), a new technological concept, in which a synergy effect is generated by the merging of IT & RT. RCP infra consists of $RCP^{Mobility}$ $RCP^{Interaction}$, $RCP^{Integration}$ technologies. For $RCP^{Mobility}$, human-friendly motion automation and personal service with walking and arming ability are developed. $RCP^{Interaction}$ ability is achieved by modeling an emotion-generating engine and $RCP^{Integration}$ that recognizes environmental and self conditions is developed. By joining intelligent algorithms and CP communication network with the three base modules, a RCP system is constructed. Especially, the RCP mobility system is focused in this paper. $RCP^{Mobility}$ is to apply a mobility technology, which is popular robot technology, to CP and combine human-friendly motion and navigation function to CP. It develops a new technological application system of auto-charging and real-world entertainment function etc. This technology can make a CP companion pet robot. It is an automation of human-friendly motions such as opening and closing of CPs, rotation of antenna, manipulation and wheel-walking. It's target is the implementation of wheel and manipulator functions that can give service to humans with human-friendly motion. So, this paper presents the definition, the basic theory and experiment results of the RCP mobility system. We confirm a good performance of the RCP mobility system through the experiment results.

• 한국산학기술학회논문지
• /
• 제17권2호
• /
• pp.209-213
• /
• 2016

경유자동차의 질소산화물을 저감하기위한 원심유동층장치를 개발하기 위해, 가스분산판 내경 184mm, 폭 50mm의 원심유동층장치에서 평균입자직경 $26{\mu}m$, $32{\mu}m$의 Cu-ZSM-5 제오라이트 촉매를 유동입자로 사용하여 원심유동층의 유동특성을 조사한 결과, 원심유동층내의 기포직경은 거의 0.3~3.0mm의 작은 범위이며, 기포의 상승속도는 기포직경 및 가스속도와 상관없이 0.0~0.4m/s 정도이다. 또한 원심유동층에서 사용가능한 평균입자 직경은 $60{\mu}m$이며, 층내에서 기체와 고체의 접촉은 양호한 것으로 조사되었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 추계학술대회
• /
• pp.322-323
• /
• 2015

육지초인용으로 사용하고 있는 전구식 회전형 대형등명기는 고압방전등을 사용하고 있어 고장발생 빈도가 높고 긴급수리에 장시간이 소요되어 기능 유지가 어려우며, 제품 가격이 높아 신규 설치 시 및 등명기 교체 시 비용 부담이 가증되는 문제점이 대두되고 있다. 따라서 기존 광원(메탈할라이트 램프 또는 텅스텐할로겐 램프)의 문제점을 개선하고, 국제항로표지협회(IALA)에서 권고하는 규격을 만족하는 효율성과 안정성이 뛰어난 대형 LED등명기 기술개발의 필요하게 되었다. 본 연구에서는 대용량 LED 모듈 및 반사경을 적용한 광학계를 설계하고, 광도와 반사경의 회전속도 제어하는 광출력/등질 제어시스템을 개발하여 20M부터 27M까지의 광달거리의 광도 가변형 육지초인용 LED 대형 등명기 개발을 수행하였다.

• 한국정보통신학회논문지
• /
• 제9권8호
• /
• pp.1709-1715
• /
• 2005

본 논문은 3차원 웹 그래픽 라이브러리의 개발에 관한 논문이다. 본 3차원 웹 그래픽 라이브러리는 웹 응용 서비스에서 사용자에게 2차원 웹 응용 서비스 또는 기존의 3차된 점 서비스에서 시야각이 한정된 그래픽 제공의 경우 보다 다양한 동적 입체감을 제공함으로써 더욱 사용자의 흥미를 유발할 수 있는 웹 응용서비스를 개발하는데 이용 가능한 3차원 웹 그래픽 라이브러리이며 다양한 3차원 웹 객체 및 현실감 있는 드로잉 기법의 적용으로 더욱 복합적이고 동적인 3차원 웹 서비스를 제공하기 위한 3차원 웹 응용 서비스의 개발에 응용이 가능하다. 특히, 3차원 웹 게임이나 웹을 이용한 동적 광고 매체 제작에 효과적으로 이용 가능하다. 본 3-D 웹 그래픽 라이브러리는 자바 언어를 이용하여 작성되었으며 자바 가상 머신과 연동하는 웹 브라우저를 통해 웹 상에서 수행되는 응용 소프트웨어의 개발에 적용 가능하다.