• Journal of Magnetics
• /
• 제18권4호
• /
• pp.487-493
• /
• 2013

The automotive industry is showing widespread interest in belt-driven electric motor-assisted (e-Assist) systems. A belt-driven assist system (BAS) starts and assists the combustion engine in place of the conventional generator. In this study, a water-cooled wound rotor synchronous motor (WRSM) for the e-Assist system was designed and analyzed. The performance of the WRSM was compared with that of an interior permanent magnet synchronous motor (IPMSM). The WRSM efficiency can be improved for the BAS by adjusting the field flux at high speeds. The field current map to obtain the maximum efficiency based on the speed and torque was developed. To control the field flux via field current control in the WRSM, a general H-bridge circuit was added to the WRSM inverter to get the rapid current response in the high-speed region; the characteristics were compared with the chopper circuit. A WRSM developed for the belt-driven e-Assist system and a prototype 115 V power electronic converter to drive the WRSM were tested with a 900 cc combustion engine. The test results showed that the WRSM-type e-Assist system had good characteristics and could successfully start and assist the 900 cc combustion engine.

• Spatial Information Research
• /
• 제16권2호
• /
• pp.207-218
• /
• 2008

기존의 유선 환경기반의 GIS 솔루션으로 무선 환경에서 서비스를 하기에는 제한된 통신 속도, 처리 속도, 화면 사이즈 등의 한계점이 존재한다. 본 연구에서는 이러한 제한된 특성들을 극복하기 위하여 모바일 환경에서의 벡터 데이터의 경량화 기법에 대하여 네 가지 단계로 제시하였다. 본 논문에서 제시한 방법을 검증하기 위하여 강남구 지역을 대상으로 실험을 실시하였다. 기존의 유선 환경에서 구축되어진 GIS 엔진과 본 논문에서 제시한 방법을 적용한 경량화된 GIS 엔진을 동일한 환경에서 성능 평가를 실시하였고 이에 따라 응답 데이터 크기, 초당 요청 처리 개수, 평균 요청 처리 시간을 비교 분석하였다. 그 결과 경량화가 적용된 GIS 엔진이 기존의 엔진과 비교하여 상당한 성능향상이 있었다는 것을 입증하였다.

• 한국추진공학회지
• /
• 제8권4호
• /
• pp.26-35
• /
• 2004

터보펌프 공급방식 액체추진제 로켓엔진시스템의 추력제어기술 연구의 일환으로 터보펌프의 저주파 동특성에 대한 연구가 진행되었다. 터보펌프는 1차 지연요소를 가지는 시스템이며, 회전수 변화에 대하여 펌프의 모멘트 변화와 터빈의 모멘트 변화의 차가 양일 때 1차 지연요소의 시정수는 양의 값을 가지게 되고, 따라서 시스템은 안정하였다. 또한 이 값이 양의 큰 값을 가질수록 응답성은 향상되었으며, 제어성은 감소하였다.

• Journal of Information Processing Systems
• /
• 제10권4호
• /
• pp.491-502
• /
• 2014

In this paper we present some research results on computing intensive applications using modern high performance architectures and from the perspective of high computational needs. Computing intensive applications are an important family of applications in distributed computing domain. They have been object of study using different distributed computing paradigms and infrastructures. Such applications distinguish for their demanding needs for CPU computing, independently of the amount of data associated with the problem instance. Among computing intensive applications, there are applications based on simulations, aiming to maximize system resources for processing large computations for simulation. In this research work, we consider an application that simulates scheduling and resource allocation in a Grid computing system using Genetic Algorithms. In such application, a rather large number of simulations is needed to extract meaningful statistical results about the behavior of the simulation results. We study the performance of Oracle Grid Engine for such application running in a Cluster of high computing capacities. Several scenarios were generated to measure the response time and queuing time under different workloads and number of nodes in the cluster.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1144-1149
• /
• 2001

In this paper, a sliding mode controller of a fluid engine mount using MR (Magneto-Rheological) fluid was discussed When the MR fluid is applied to a fluid mount, resistance of MR fluid can be controlled by electro-magnetic valve installed in the inertia track. Since the rheological property of the MR fluid shows a function of shear rate, the damping characteristics of the mount will be change according to the frequency. Changing an applied magnetic field to the valve changes the property of the mount, such as the resistance of the MR fluid, the notch and the resonant frequencies due to the fluid passing, quantity of the fluid passing, the effective piston area of the volumetric damping and stiffness. Therefore, the fluid mount using MR fluid can be regarded as a variable structure system The sliding mode control known well as a particular type of variable structure control was introduced in this study. The sliding mode control, which has inherent robustness, is also expected to improve the control performance in the engine mount The sliding mode controller for the mount formatted by taking into account the response property with a time constant to MR fluid and the variable mount property. The motion equations of the fluid mount are derived from Newton's law of motion and used in numerical simulation. Numerical simulations illustrate the effectiveness of the sliding mode controller.

• 한국정보통신학회논문지
• /
• 제24권1호
• /
• pp.134-137
• /
• 2020

Recently, there are emphasized to support the maintenance and management system of vessels using acquired data from engine part equipment. But, there are limitations for data exchange and management. To solve the problem, the ISO published ISO 19847 and 19848. In this paper, we analyze the ISO 19848 requirements related to identify data channel ID for ship equipment, and propose the examples for applying encoding techniques. In addition, we suggest the proposed technique for applying of managing the failure and maintenance type of the ship's engine part facilities by examples. If this method is applied, the vessel's equipment can exchange data through the sharing of the code table, and express what response is needed or acted, including where the failure occurred.

• International Journal of Automotive Technology
• /
• 제1권1호
• /
• pp.42-47
• /
• 2000

This paper concentrates on the design and construction aspects of a transmission for a mid-class passenger car with internal combustion engine. The transmission, consisting of a Continuously Variable Transmission (CVT) with a Van Doorne V-belt, a planetary gear set and a compact steel flywheel is used to prove the concept of mechanical torque assist. The design goal is to obtain a proof of concept transmission with maximal efficiency, using proven transmission technology. With the developed so called Zero Inertia CVT, the fuel economy of the car is improved by operating the engine at its fuel optimal operating line. To achieve a good vehicle acceleration response, the flywheel assists the powertrain mechanically.

• 설비공학논문집
• /
• 제22권12호
• /
• pp.873-880
• /
• 2010

The present study developed a computer simulation program to determine the optimum strategy and capacity of a micro combined heat and power(CHP) system. This simulation program considered a part-load electrical/thermal efficiency and transient response characteristics of CHP unit. The result obtained from the simulation was compared with the actual operation of 30 kW gas engine driven micro CHP system. It was found that the simulation could reproduce the daily operation behavior, such as operating hours and mean load factor, closely to the actual behavior of the system and could predict the amount of electrical/thermal output and fuel consumption with the error of less than 12%.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 춘계학술대회 논문집(Proceeding of the KOSME 2000 Spring Annual Meeting)
• /
• pp.52-59
• /
• 2000

Experimental studies were performed to improve the THC emission characteristics by optimizing the flow in the exhaust manifold and CCC in a SI engine. For this purpose the flow characteristics in the exhaust manifold and CCC were measured by using LDV technique under various engine conditions, Referring to these data a new type exhaust manifold was designed to improve the cold-start emission characteristics and the response characteristics of {{{{ OMICRON _2}}}} sensor by optimizing the flow pattern and reducing the thermal inertia of the exhaust manifold system. It was found through the vehicle emission tests that the emission characteristics of THC of the new type exhaust manifold was improved by 12% through the optimizing the flow pattern in the exhaust manifold.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.313-317
• /
• 2001

Magneto-Rheological fluid (MR fluid) is known as a class of functional fluid with controllable apparent viscosity of the fluid by the applied magnetic field strength. Extensive researches with the functional fluids have been done on applications of the fluid to mechanical components such as suspension, absorber, engine mount, clutch, break, valve, etc. In this study, a new torsional damper using MR fluid is proposed, and the response property of the damper was theoretically investigated. The present damper is quit effective for reducing the driveline vibration in a wide range of the engine speed.