• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.1
• /
• pp.41-47
• /
• 2012

Recently, due to the rapid rise of the international oil price, the burden of fuel oil expense is relatively increasing in a ship. And the international restriction of the greenhouse gas which was generated from the burning of fuel oil is also rapidly strengthened. Therefore, to reduce the greenhouse gas and fuel oil consumption, many shipping company adopted the low speed navigation and it was focused on the improvement of fuel consumption efficiency and the usage of alternative energy in the marine engine development field. In this paper, the fuel oil consumption according to the ship's speed was measured in the actual seas and analyzed the shop test results in the shipyard and the ship navigation data from the abstract log. And then it was proposed that the ship's economic speed was 14~15kts and the optimum rpm was 140~150 in specific sea conditions.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.3
• /
• pp.148-153
• /
• 2006

This study dealt with the measurement of exhausted gas concentration, the estimation of a combustion efficiency, and the review of IMO indexing. We concentrated on establishing the basic data to take a counterplan coping with $CO_2$ regulations. The average combustion efficiency was 98% in shop test of new engines and 96.5% in sea trial test of new ships, respectively. It would become lower for the old engine or/and ship. High combustion efficiency results in high $CO_2$ emission and low combustion efficiency results in high emission of incomplete combustion products. The efficient method reducing $CO_2$ emission without an increase in noxious air pollutants would be the development of a substitute fuel and the fuel-efficient and economical engine, and the fair play among shipping agencies in a ship speed. In reviewing of IMO indexing, it is necessary to begin by analyzing the carbon content of a marine fuel for a precise estimates.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.3 no.1
• /
• pp.142-157
• /
• 2001

This study was conducted to get the basic information for promoting farm machinery productivity by surveying the regular maintenance and repair status of major farm machinery such as power tiller, farm tractor, rice transplanter and combine harvester. The survey was carried out through 9 provinces including Cheju province by direct visiting farmers with prepared questionnaire. The results of this study can be summarized as follows : 1. The average farming carrier of the surveyed farmers was 25.3 years, and 21-30 years of farming carrier showed the highest portion as 40.7%. The average carrier of using farm machinery was 9.4 years, and that was 14.9 years for power tiller, 8.3 years for farm tractor, 9.0 years for rice transplanter, 7.9 years for combine harvester, 7.5 years for mini tiller, 9.7 years for power sprayer, and 8.2 years for binder etc. 2. The regular maintenance for farm machinery was conducted mainly at repair shop (49.5%) or dealer agency (12.0%) as 61.5%, and 34.9% of farmers conducted the regular maintenance by themselves at their house. 3. The reasons for not-fully recognizing operation manual and insufficient before-, during-, after-maintenance of farm machinery were insufficient time for them (45.8%), troublesome (22.9%), unknown maintenance method (16.3%), unknown the necessity for maintenance (12.4%), and others (2.6%) in order. 4. For the annual exchange of engine oil, 3.2 times is necessary but actually 1.7 times was exchanged for power tiller, 4.3 times is necessary but actually 1.9 times was exchanged for farm tractor, 2.7 times is necessary but actually 1.7 times was exchanged for rice transplanter, 2.2 times is necessary but actually 2.3 times was exchanged combine harvester. 5. For the annual cleanness or exchange of fuel filter, 3.2 times is necessary but actually 1.1 times was done for power tiller, 4.3 times is necessary but actually 1.6 times was done for farm tractor, 2.7 times is necessary but actually 1.7 times was done for rice transplanter, 1.9 times is necessary but actually 0.8 times was done for combine harvester. 6. For the annual cleanness or exchange of air filter, 3.2 times is necessary but actually 1.4 times was done for power tiller, 4.2 times is necessary but actually 2.4 times was done for farm tractor, 2.6 times is necessary but actually 1.6 times was done for rice transplanter, 3.9 times is necessary but actually 7.0 times was done for combine harvester. 7. For the experience of breakdown related to maintenance, 5.3% of farmers experienced breakdown due to the insufficient exchange of engine oil, 7.7% of farmers experienced breakdown due to the insufficient cleanness or exchange of fuel filter, and 2.9% of farmers experienced breakdown due to the insufficient cleanness or exchange of air filter. 8. Most farmers (76.1%) recognized the necessity for agricultural machinery training or education, and most farmers preferred about one week for the training period, simple or ease maintenance for the training level, agricultural technical center or agricultural machinery manufacturer for the training agency. 9. Complete recognition of operation manual and sufficient before-, during-, and after-maintenance for farm machinery can minimize the breakdown as well as conduct suitable period farming, enlarge the endurance, prevent the safety accidents, and promote productivity of farm machinery. Therefore, these can be accomplished by the thorough training or education for agricultural machinery.

• The Journal of Society for e-Business Studies
• /
• v.25 no.4
• /
• pp.143-154
• /
• 2020

With the increasing trend of making manufacturing system intelligent and autonomous, the introduction of robot-assist automation, like machine tending system for automated operation of CNC machine tools, is being actively carried out at many industrial sites. Most important part of this intelligent system to install machine tending system, is interface programming between the CNC machine tools and the industrial robot. Despite this importance, however, the machine tending system has many setup problems. it is necessary for difficult re-program of both controllers whenever a new CNC machine tool or robot is introduced. And, the helps of external engineers is required even though trivial changes due to the complex structure of the machine tending system. Authors of this paper introduces the integrated system of the interface between heterogeneous CNC machine tools and industrial robots. In addition, the digital twin implemented inside the machine tool controller enable shop-floor operators to change the interface programming easily. To implement this system, an integrated development environment for 1) an intelligent HMI platform that provide standardized interfaces to heterogeneous CNC machine tools and 2) a robot platform developing application software of various robots, was established. For easy un-tact environment, this paper explain the development of 3) a game-engine based web program of controlling and monitoring machine tending system remotely.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.8
• /
• pp.153-162
• /
• 2020

The purpose of this study was to provide fundamental data to cosmetic waxing industry by investigating the using and awareness of cosmetic waxing. The questionnaires were administered to 230 subjects in Gwangju and Jeon-nam regions and the collected were statistically processed using SPSS ver. 21.0 program. The results are as follows: First, the most frequent groups were 20s in age group, married in marital status, professional in occupation, and high school graduation in educational background. For the difference in awareness by their general characteristics, the hair removal techniques most experienced by subjects were shaving and waxing and most of them came to know the waxing through acquaintance. Most of them reported positive awareness for experience of waxing and clean hygiene and neatness accounted for most of reason. The most frequently used place for waxing was professional cosmetic shops (nail, skin, and hair) and the most frequent motivation for waxing was effectiveness for skin hygiene. The areas where waxing is mainly performed were armpit, arm, and leg. The most of subjects received the procedure twice a month and in spring. Most of them reported 'very satisfied' for the procedure. It is expected, based on the results of this study, that the cosmetic waxing industry as a part of the beauty industry that is attracting attentions as a new growth engine for the development of national economy accomplish growth.