• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1167-1169
• /
• 2009

Multipath routing in wireless sensor networks has been proven to provide with increased data delivery ratio, security, robustness to node and link failures, network throughput, etc. However, the energy cost for multiple routes construction and their maintenance is very high. This paper proposes a sink-initiated, node-disjoint multipath routing protocol for static wireless sensor networks that significantly minimizes the route construction messages and thereby saves the critical batter energy of sensor nodes. It also distributes the traffic load spatially over many nodes in the forwarding paths, which ensures balanced energy consumption in the network and thereby increases the network lifetime. The simulation results show that it decreases the routing overhead as well as the standard deviation of nodes' residual energies.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.320-326
• /
• 2016

In existing literature on multiple-input multiple-output (MIMO) relaying communication systems, antenna selection is often implemented by maximizing the channel capacity or the output single-to-noise ratio (SNR). In this paper, we propose an energy-efficient low-complexity antenna selection scheme for MIMO relaying communication systems. The proposed algorithm is based on beamforming and maximizing the Frobenius norm to jointly optimize the transmit power, number of active antennas, and antenna subsets at the source, relaying and destination. We maximize the energy efficiency between the link of source to relay and the link of relay to destination to obtain the maximum energy efficiency of the system, subject to the SNR constraint. Compared to existing antenna selection methods forMIMO relaying communication systems, simulation results demonstrate that the proposed method can save more power in term of energy efficiency, while having lower computational complexity.

• International Journal of Computer Science & Network Security
• /
• v.22 no.9
• /
• pp.389-395
• /
• 2022

A Mobile Sensor Network is widely used in real time applications. A critical need in Mobile Sensor Network is to achieve energy efficiency during routing as the sensor nodes have scarce energy resource. The nodes' mobility in MWSN poses a challenge to design an energy efficient routing protocol. Clustering helps to achieve energy efficiency by reducing the organization complexity overhead of the network which is proportional to the number of nodes in the network. This paper proposes"EERA: Energy Efficient Routing Algorithm for Mobile Sensor Network" is divided into five phases. 1, Cluster Formation 2.Cluster head and Transmission head selection 3.Path Establishment / Route discovery and 4,Data Transmission. Experimental Analysis has been done and is found that the proposed method performs better than the existing method with respect to four parameters.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.2
• /
• pp.35-43
• /
• 2018

In this paper, we propose a grid-based efficient routing protocol for a mobile sink in wireless sensor networks. In the proposed protocol, the network is partitioned into grids and each grid has a grid head. For the efficient routing to a mobile sink, the proposed protocol uses a mobile sink representative node to send the data to a mobile sink and grid heads are used as a mobile sink representative node. Furthermore, the proposed protocol uses nodes in the boundary of the center grid as position storage nodes. The position storage nodes store the position of a mobile sink representative node and provide source nodes with it for data delivery. With these features, the proposed protocol can reduce a lot of overhead to update the position information and improve the delay of data delivery to a mobile sink. The proposed protocol performs better than other protocols in terms of the delay and the energy consumption per node in the performance evaluation.

• Journal of Communications and Networks
• /
• v.11 no.4
• /
• pp.390-405
• /
• 2009

Wireless sensor networks (WSNs) are envisioned to facilitate information gathering for various applications and depending on the application types they may require certain quality of service (QoS) guarantee for successful and guaranteed event perception. Therefore, QoS in WSNs is an important issue and two most important parameters that hinder the goal of guaranteed event perception are time-sensitive and reliable delivery of gathered information, while a minimum energy consumption is desired. In this paper, we propose an energy-aware, multi-constrained and multipath QoS provisioning mechanism for WSNs based on optimization approach. Hence, a detailed analytical analysis of reliability, delay and energy consumption is presented to formulate the optimization problem in an analytical way. A greedy algorithm is proposed to achieve the desired QoS guarantee while keeping the energy consumption minimum. Also, a simple but efficient retransmission mechanism is proposed to enhance the reliability further, while keeping the delay within delay bound. Simulation results demonstrate the effectiveness of our scheme.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.3
• /
• pp.115-122
• /
• 2017

In this paper, we propose an adaptive data aggregation and compression scheme for wireless sensor networks with energy-harvesting nodes, which increases the amount of data arrived at the sink node by efficient use of the harvested energy. In energy-harvesting wireless sensor networks, sensor nodes can have more than necessary energy because they harvest energy from environments continuously. In the proposed scheme, when a node judges that there is surplus energy by estimating its residual energy, the node compresses and transmits the aggregated data so far. Conversely, if the residual energy is estimated to be depleted, the node turns off its transceiver and collects only its own sensory data to reduce its energy consumption. As a result, this scheme increases the amount of data collected at the sink node by preventing the blackout of relay nodes and facilitating data transmission. Through simulation, we show that the proposed scheme suppresses the occurrence of blackout nodes and collect the largest amount of data at the sink node compared to previous schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.482-491
• /
• 2007

This paper proposes a k-disjoint-path routing algorithm that provides energy efficient and reliable message transmission in wireless sensor networks. The proposed algorithm sends messages through a single path without the occurrence of critical events. However, it sends through k disjoint paths(k>1) under the occurrence of critical events. The proposed algorithm detects the occurrence of critical events by monitoring changing data patterns, and calculates k from a well-defined fault model and the target-delivery ratio. Our simulations reveal that the proposed algorithm is more resilient to node failure than other routing algorithms, and it also decreases energy consumption and reduces the average delay much more than multi-path and path-repair algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.755-761
• /
• 2013

Medium access control (MAC) protocols for wireless sensor networks make sensor nodes on state for energy-efficiency only when necessary. In this paper we present an energy efficient priority-based MAC protocol for energy-harvesting Wireless Sensor Networks (WSNs). For support priority-based packet transmission the proposed EEPB-MAC protocol uses the modified IEEE 802.15.4 beacon frames including priority bit, sender node address, and NAV value fields. A receiver node periodically wakes up, receives sender beacon frames, selects data sending sender, and broadcasts a beacon frame containing the selected sender's address. A receiver node selects sender node according to sender's data priority. A receiver nodes also adjust wake up period based on their energy states. Hence, the energy consumption of receiver node can be minimized. Through simulations and analytical analysis, we evaluate the performance of our proposed the EEPB-MAC protocol and compare it against the previous MACs. Results have shown that our protocol outperforms other MAC in terms of energy consumption, higher priority packet delivery delay.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.6
• /
• pp.1113-1132
• /
• 2011

In wireless sensor networks (WSNs), most energy saving asynchronous MAC protocols are custom tailored for unicast communications only. However, broadcast protocols are very commonly used in WSNs for a variety of functionalities, such as gathering network topology information, event monitoring and query processing. In this paper, we propose a novel low-power asynchronous broadcast MAC protocol called Alarm Broadcast (A-CAST). A-CAST employs the strobe preamble that specifies the residual waiting time for the following data transmission. Each receiver goes back to sleep upon hearing the strobe preamble for the residual time duration, to conserve energy and to wake up just before data transmission starts. We compute the energy consumption of A-CAST via rigorous mathematical analysis. The analytic results show that A-CAST outperforms B-CAST, a simple broadcast extension of the well-known B-MAC. We also implement A-CAST on sensor motes and evaluated its performance through real experiments. Our experimental results show that A-CAST reduces the energy consumption by up to 222% compared to the previously proposed protocols.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.3
• /
• pp.180-190
• /
• 2011

Efficient energy consumption is a critical factor for deployment and operation of wireless sensor networks (WSNs). To achieve energy efficiency there have been several hierarchical routing protocols that organize sensors into clusters where one sensor is a cluster-head to forward messages received from its cluster-member sensors to the base station of the WSN. In this paper, we propose a self-organized clustering method for cluster-head selection and cluster based routing for a WSN. To select cluster-heads and organize clustermembers for each cluster, every sensor uses only local information and simple decision mechanisms which are aimed at configuring a self-organized system. By these self-organized interactions among sensors and selforganized selection of cluster-heads, the suggested method can form clusters for a WSN and decide routing paths energy efficiently. We compare our clustering method with a clustering method that is a well known routing protocol for the WSNs. In our computational experiments, we show that the energy consumptions and the lifetimes of our method are better than those of the compared method. The experiments also shows that the suggested method demonstrate properly some self-organized properties such as robustness and adaptability against uncertainty for WSN's.