• 공업화학
• /
• 제10권4호
• /
• pp.531-536
• /
• 1999

누출시험 장치를 이용하여 미량 물 누출 실험을 수행하였다. 2.25Cr-1Mo 시편의 누출경로는 나트륨-물 반응 생성물에 의해 plugging되는 경우가 발생하였으나, 대부분 re-open상태를 나타내었다. 또한 누출 경로가 완전 re-open된 후 나트륨 부위에서 시편의 self-wastage pattern은 온도에 영향을 받지 않음을 알 수 있었으며, 누출경로가 re-open 되면서 나타나는 defected 크기는 대략 5 mm 이내임을 알 수 있었다. 누출 경로가 완전 re-open 되는데 걸리는 시간은나트륨 온도가 높을수록 짧게 나타났으며, 평균적으로 $450^{\circ}C$에서 143분, $475^{\circ}C$의 경우 40.7분, $510^{\circ}C$의 경우 34.7분을 나타내었다.

• Nuclear Engineering and Technology
• /
• 제47권6호
• /
• pp.700-711
• /
• 2015

Sodium-cooled fast breeder reactors use liquid sodium as a moderator and coolant to transfer heat from the reactor core. The main hazard associated with sodium is its rapid reaction with water. Sodium-water reaction (SWR) takes place when water or vapor leak into the sodium side through a crack on a heat-transfer tube in a steam generator. If the SWR continues for some time, the SWR will damage the surface of the defective area, causing it to enlarge. This self-enlargement of the crack is called "self-wastage phenomena." A stepwise numerical evaluation model of the self-wastage phenomena was devised using a computational code of multicomponent multiphase flow involving a sodium-water chemical reaction: sodiumwater reaction analysis physics of interdisciplinary multiphase flow (SERAPHIM). The temperature of gas mixture and the concentration of NaOH at the surface of the tube wall are obtained by a numerical calculation using SERAPHIM. Averaged thermophysical properties are used to assess the local wastage depth at the tube surface. By reflecting the wastage depth to the computational grid, the self-wastage phenomena are evaluated. A two-dimensional benchmark analysis of an SWAT (Sodium-Water reAction Test rig) experiment is carried out to evaluate the feasibility of the numerical model. Numerical results show that the geometry and scale of enlarged cracks show good agreement with the experimental result. Enlarged cracks appear to taper inward to a significantly smaller opening on the inside of the tube wall. The enlarged outer diameter of the crack is 4.72 mm, which shows good agreement with the experimental data (4.96 mm).

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.368-375
• /
• 2016

A sodiume-water reaction takes place when high-pressured water vapor leaks into sodium through a tiny defect on the surface of the heat transfer tube in a steam generator of the sodium-cooled fast reactor. The sodiume-water reaction brings deterioration of the mechanical strength of the heat transfer tube at the initial leakage site. As a result, it damages the crack itself, which may eventually enlarge into a larger opening. This self-enlargement is called "self-wastage phenomenon." In this study, a simulant experiment was proposed to reproduce the self-enlargement of a crack and to evaluate the mechanism of the self-wastage. The damage on the surface of the crack was simulated by making the neutralization reaction with hydrochloric acid solution and sodium hydroxide solution. A numerical investigation was carried out to validate the feasibility of the approach and to determine experimental conditions. From the computation results, it is observed that when 5M HCl is injected into 5M of NaOH with 0.05 m/s inlet velocity, the temperature at the surface near the crack increased over 319.26 K. The computational results show that the self-wastage phenomenon is capable of being reproduced by the simulant experiment.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1157-1163
• /
• 2008

Fuel represents a significant portion of the operating costs of voyages of the vessel. Under this situation, dramatic increase in fuel price caused a problem that earnings of ship becomes decreased seriously. Pumps in a cooling system of the vessel are often operated inefficiently. The reasons will vary from process to process and application to application. Inefficiency of pumps is one of the reason for making the cost of operating the vessel increased. This paper suggests energy-effective cooling system that controls sea water pumps with inverters to reduce energy consumption in vessel by conducting simulation with LabVIEW. Results shows that electric energy consumption of pumps are significantly deceased. If this energy-effective cooling system is applied to other systems which need cooling, it could be useful in reducing electric energy wastage.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.257-264
• /
• 2024

The sodium cooled fast reactor (SFR) is one of the Gen-IV reactors with the most operating experience accumulated. Although the technology level is the most mature among the Gen-IV reactors, there is still a safety problem that has not been solved, which is the sodium-water reaction. Since sodium and water are separated only by a heat transfer tube with a thickness of only a few mm, there is inherently a risk of a sodium-water reaction (SWR) accident in the SFR. In this study, it is attempted to quantitatively evaluate the resistance of SWR accidents by replacing the shell and tube steam generator with printed circuit steam generator (PCSG) as a method to mitigate the SWR accident. To do this, a CATS-S (Compact Accident Tolerance Steam Generator-SWR) facility was designed and built. And for the quantitative evaluation of accident resistance, a methodology for measuring the impingement wastage rate was established. As a result of this research, the impingement wastage rate caused by SWR generated in a PCSG was measured first time. It was confirmed that the impingement wastage phenomenon was suppressed in the PCSG, and the accident resistance was higher than that of the SWR through comparison with the experimental results performed in the existing shell and tube steam generator. In conclusion, a PCSG is more resistant to impingement wastage as a result of the SWR accident than existing shell and tube steam generators, and it is estimated that a PCSG can mitigate SWR accidents, an inherent problem of SFR.

• Korean Chemical Engineering Research
• /
• 제54권6호
• /
• pp.863-870
• /
• 2016

본 논문의 목적은 소듐냉각고속로(sodium cooled fast reactor, SFR)와 초임계 $CO_2$ Brayton cycle의 연계 시, 원자로 열수송 계통과 동력변환 계통의 압력 경계를 형성하는 회로인쇄형 열교환기의 경계면에 균열이 발생해 고압(약 200 bar)의 $CO_2$가 상압 수준의 액체소듐유로 측에 유입되었을 때의 물리/화학적 현상을 파악하여 열교환기 설계에 활용 가능한 실험 자료를 생산하는 것이다. 열교환기의 소듐-$CO_2$ 경계면 균열 현상은 경계면의 균열 크기에 따라 미세 균열에 의한 소듐유로막힘(plugging) 현상과 상대적으로 큰 균열에 의한 열교환기 재료손상(wastage) 현상으로 나뉜다. Plugging 실험결과, 소듐유로 직경이 3mm일 때 $CO_2$ 주입 즉시 소듐 흐름이 정지한 반면 소듐유로 직경이 5 mm일 때는 유량이 감소되기 시작하는 시점은 3 mm의 경우와 유사하게 $CO_2$ 주입 즉시 나타났지만 소듐의 흐름이 완전히 정지할 때까지는 상대적으로 오랜 시간이 소요되었다. 이러한 실험결과는 실제 열교환기의 소듐-$CO_2$ 경계면에서 미세균열이 발생했을 때, 소듐유로 직경이 3 mm로 좁을 경우 균열 발생과 동시에 해당 소듐유로가 반응생성물에 의해 막혀 해당 유로 외의 유로들로 지속적인 열교환기 운전이 가능하지만, 소듐유로의 직경이 5 mm로 넓어질 경우 소듐유로가 고체생성물에 의해 즉시 막히지 않고 생성물이 소듐유로를 따라 계통 내부를 이동하다 일정 농도 이상이 되어야 소듐유로를 막게 할 것으로 예상할 수 있는 결과이다. Wastage 실험결과, 열교환의 재질(STS316, Inconel600, G91 합금강), 운전온도($400{\sim}500^{\circ}C$), 노즐직경(0.2~0.8 mm), 시편-노즐 거리(2~6 mm)와 무관하게 고압(약 200~250 bar)의 $CO_2$ 분사에 의한 시편의 물리적 손상(erosion) 현상은 발생하지 않았다. 노즐에서의 분사되는 $CO_2$의 분사속도는 마하 0.4~0.7인 것으로 확인되었다. 본 연구의 실험결과는 열교환기 파손 대처 설계에 배경 실험 자료로 활용될 것으로 기대된다.

• 한국통신학회논문지
• /
• 제32권10A호
• /
• pp.1004-1014
• /
• 2007

In sensor networks, it is crucial to reliably and energy-efficiently deliver sensed information from each source to a sink node. Specifically, in mobile sink (user) applications, due to the sink mobility, a stationary dissemination path may no longer be effective. The path will have to be continuously reconfigured according to the current location of the sink. Moreover, the dynamic optimal path from each source to the sink is required in order to reduce end-to-end delay and additional energy wastage. In this paper, an Adaptive Reversal Optimal path Tree (AROT) protocol is proposed. Information delivery from each source to a mobile sink can be easily achieved along the AROT without additional control overhead, because the AROT proactively performs adaptive sink mobility management. In addition, the dynamic path is optimal in terms of hop counts and the AROT can maintain a robust tree structure by quickly recovering the partitioned tree with minimum packet transmission. Finally, the simulation results demonstrate that the AROT is a considerably energy-efficient and robust protocol.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2010년도 춘계학술대회
• /
• pp.494-506
• /
• 2010

대한제국 융회 3년인 1909년 12월 25일에 초점등하여 현재 100주년을 맞이하는 가덕도등대에 '가덕도등대 100주년 기념관'을 건립하여 등대 및 가덕도 섬의 역사와 문화를 해양유물로서 보존하고 가덕도등대를 통하여 주변역사와 해양문화를 국민들이 체험 및 교육할 수 있는 장소로 조성하고자 한다.

• 한국통신학회논문지
• /
• 제36권7B호
• /
• pp.848-857
• /
• 2011

무선통신 기반의 원격검침 시스템은 설치의 용이함, 설비공사 및 유지보수 비용절감, 다양한 검침시스템으로의 적용의 유연성, 그리고 네트워크 확장성의 용이함 등의 장점으로 인해 최근 다양한 원격검침분야에서 활발히 활용되고 있다. 하지만, 이같은 다수의 장점에도 불구하고, 멀티 홉 기반의 원격검침망에서는 매 검침데이타 획득시마다 과다한 양의 트래픽을 발생시킴으로써, 데이터 충돌과 간섭의 확률을 증대시키고, 불필요한 전송으로 인한 에너지 낭비와 함께 특정 노드들의 에너지만 급격하게 소모되는 에너지 불균형 현상을 야기하고 있다. 그리하여 본 논문에서는 멀티홉 기반의 무선 원격검침망에서 발생하는 트래픽의 양을 최소로 줄임으로써 검침망의 각 노드들의 에너지 보존은 물론 다양한 문제점들을 해결할 수 있는 효율적인 검침데이타 수집기법을 제안하고, 성능평가를 통해 제안하는 기법에 대한 성능의 우수성을 입증한다.

• Journal of Nutrition and Health
• /
• 제35권3호
• /
• pp.394-401
• /
• 2002

The purpose of this study was to : (a) examine diabetic patients' sensory evaluation and food preferences, (b) analyze the portion sizes & plate wastes, (c) investigate the factors affecting plate wastes, and (d) determine the nutritional & mometary values of the plate wastes. A questionnaire for determining food preference and sensory evaluation was developed. Thirty-three diabetic patients who were hospitalized in Sanggye Paik hospital in Seoul were studied. Serving sizes and plate wastes were weighed by using an electric scale, and the CAN-Pro program was used to evaluate the nutritional value or the food consumed. The data were analyzed using the SAS package program for descriptive analysis, t-test, ANOVA, and the Pearson correlation. Using a five-point Likeu-type scale, the temperature s[ore ranged from 3.1 to 3.3 (1 : very poor, 5 : excellent), the preference store was 3.0-3.2 (1 : very dislike, 5:very like), the taste score was 2.9-3.2 (1 : very poor, 5 : excellent), and the amount of food served score was 2.8-3.0 (1 : too little, 5 : too much). Serving sizes were considered insufficient by patients because most of the DM diet was low in calories. Average plate waste for the DM diet was 26.2% of the total served, by weight, and was lower than that for patients consuming a normal diet, which was 30.3%, found in previous research. Those subjects who had been previously hospitalized and who wished to participate in a campaign for food waste reduction produced less plate waste than other groups (p<.05). Plate wastes of the DM diet were negatively correlated with taste, temperature, and preference, and were positively correlated with the amount served: however, these results were not statistically significant. It was found that diabetic patients consumed adequate levels of energy, protein, Ca, Fe, Vitamin B$_1$, Vitamin B$_2$, and niacin, but inadequate levels of Phosphorus, Vitamin A and Vitamin C. The plate wastes were calculated to be 26.2% of the total cost (￦ 3,489), which is ￦9l5. This represents a significant wastage of resources from the hospital. The results of this study could assist foodservice managers in both controlling food wastage, and improving the quality of hospital food services.