• Nuclear Engineering and Technology
• /
• 제42권2호
• /
• pp.145-150
• /
• 2010

The paper is describing work being developed in the frame of a 5-year IAEA Coordinated Research Programme (CRP) started in late 2005. Participants gained knowledge of modelling methodologies and experience in the development and use of rather sophisticated simulation tools in support of site characterization and performance assessment calculations. These goals were achieved by a coordinated effort, in which the advantages and limitations of numerical models are examined and demonstrated through a comparative analysis of simplified, illustrative test cases. This knowledge and experience should help them address these issues in their own country's nuclear waste program. Coordination efforts during the first three years of the project aimed at enabling this transfer of expertise and maximizing the learning experience of the participants as a group. This was accomplished by identifying common interests of the participants (i.e., Process Modelling and Total System Performance Assessment methodology), and by defining complementary tasks that are solved by the members. Synthesis of all available results by comparative assessments is planned in the coming months. The project will be completed end of 2010. This paper is summarizing activities up to November 2009.

• 한국농촌건축학회논문집
• /
• 제19권2호
• /
• pp.9-16
• /
• 2017

The study analyzed the heat losses and the building energy efficiency grade by the energy simulation using the ENERGY# and ECO2 programs for the three types of Standard design of rural houses. It was calculated the energy efficiency rating by the ECO2 program for the rural housing standard design, and the energy demand and the energy consumption by each factor were compared and analyzed. And it analyzed energy consumption by element of each house by ENERGY # program. As a result, first in the evaluation of the energy efficiency grade of buildings by the ECO2 program, the rating for primary energy requirement for the housing newly built by the standard design of rural house is expected to range from 2 to 4 with 189.3 to $238.7kWh/m^2.a$. Second, the energy loss of each part of standard design of rural housing occurs in the order of ventilation 39%, window 33%, outer wall 14%, roof 9%, bottom 5%, and energy loss through ventilation and window occurs more than 70%. Third, the most beneficial effects on the energy efficiency grade is obtained the lowest grade of all three types by 2 when the lowering of the window and door heat transmission rate and the lowering of the light density, and the heat exchange ventilation device is not installed. Fourth, in the standard design of rural housing, the energy demand is occupied by heating > hot water > lighting order, and the order of the weight is changed in order of heating > lighting > ventilation > hot water. Fifth, building energy efficiency assessment system needs to establish policy for fixing rural housing energy as a practical device to ensure energy performance and quality.

• 방사성폐기물학회지
• /
• 제10권3호
• /
• pp.171-188
• /
• 2012

파이로 처리 방사성 폐기물 처분 시스템 A-KRS에 대한 결정론적, 확률론적 안전성 평가가 가능하도록 골드심 프로그램을 개발하였다. 처분장에서 핵종이 유출되어 다양한 처분 시스템 내 매질을 이동하는 것에 관련된 주요 시나리오를 도출하기 위하여 처분 시스템을 구성하는 각 요소 별로, 그리고 처분 시스템 내 핵종의 이동에 관여하는 FEP을 인지 선별하여 수학적 모델을 개발하고 이를 골드심 템플릿 프로그램으로 개발하였다. 이 프로그램을 이용하여 폐쇄후 방사선적 안전성 평가를 결정론적으로 수행하여 5개의 정상 및 비정상 시나리오를 평가하여 그 결과를 상호 비교하였다.

• 한국건설관리학회논문집
• /
• 제16권6호
• /
• pp.124-135
• /
• 2015

세계적으로 환경오염문제가 대두되면서 국내에서도 정부와 민간차원에서 친환경건축을 위한 노력이 활발히 진행 중이다. 하지만 건축물의 친환경 성능 및 친환경 관련 법규 및 기준 등에 대한 평가환경은 2차원기반의 수작업을 통한 평가로 진행되기 때문에 시간, 비용, 노동력 등이 많이 소요되며 평가의 정확성 및 효율성을 확보하기 어렵다. 따라서 본 논문에서는 개방형BIM기반으로 친환경건축 관련 인허가 업무의 개선을 목적으로 친환경건축 관련 인허가 조건 중 에너지성능지표 평가항목과 IFC포맷의 데이터와 연계를 통한 평가방안 모색하고 발생하는 문제점에 대한 대안을 제시하며 이를 반영한 평가프로그램의 활용으로 평가 프로세스를 제시함으로써 개방형BIM기반으로 에너지성능지표의 평가를 자동화하는 방안을 제시한다. 본 연구에서 제시된 방안을 친환경건축 관련 인허가 업무에 적용함으로써 업무절차의 간소화와 자동화를 통한 시간, 비용, 노동력의 절감을 기대할 수 있으며 설계변경 시 요구되는 절차가 단순화되어 업무의 생산성과 효율성이 향상되며 검토과정과 결과 값의 투명성과 검토의 정확성과 신뢰도를 확보 할 수 있을 것으로 기대한다.

• 한국태양에너지학회 논문집
• /
• 제35권1호
• /
• pp.53-60
• /
• 2015

The ECO2 building energy simulation program is used on the assessment project for building energy certification of non-dwelling buildings in Korea. In the design of energy efficient buildings, it is beneficial to identify the most important design parameters in oder to more efficiently develop alternative design solutions or reach optimized design solutions. The sensitivity analyses will be used at a reasonable early stage of the building design process, where it is still possible to influence the most important design parameters. In this study, the sensitivity analysis is focused on building envelope parameters such as U-values, SHGC and Wall-window ration.

• Smart Structures and Systems
• /
• 제8권4호
• /
• pp.399-412
• /
• 2011

This study compares the performance of two smart isolation systems that utilize superelastic shape memory alloys (SMAs) for seismic protection of bridges using energy balance concepts. The first isolation system is a SMA/rubber-based isolation system (SRB-IS) and consists of a laminated rubber bearing that decouples the superstructure from the bridge piers and a SMA device that provides additional energy dissipation and re-centering capacity. The second isolation system, named as superelastic-friction base isolator (S-FBI), combines the superelastic SMAs with a flat steel-Teflon bearing rather than a laminated rubber bearing. Seismic energy equations of a bridge structure with SMA-based isolation systems are established by absolute and relative energy balance formulations. Nonlinear time history analyses are performed in order to assess the effectiveness of the isolation systems and to compare their performance. The program RSPMatch 2005 is employed to generate spectrum compatible ground motions that are used in time history analyses of the isolated bridge. Results indicate that SRB-IS produces higher seismic input energy, recoverable energy and base shears as compared to the S-FBI system. Also, it is shown that combining superelastic SMAs with a sliding bearing rather than rubber bearing significantly reduce the amount of the required SMA material.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.13-18
• /
• 2009

Building is a major energy consumer, and now many efforts are made to save energy in the design and using equipments. The most noticeable achievement in those efforts is a building energy performance assessment program. But most programs are not satisfying enough to provide exact meteorological data, and data source and calculation, and data collection period are not clearly defined. That is common in most of domestic programs. This study collects typical meteorological data in 16 items and analyzes them with Visual DOE 4.0 to compare with existing data. The comparison found that revised data shows a 11% increase on average during cooling period from June to September, and a 13% decrease on average during heating period from December to February, in terms of building heating and cooling load in a monthly basis.

• 방사성폐기물학회지
• /
• 제10권4호
• /
• pp.263-272
• /
• 2012

파이로처리 방사성 폐기물 처분 시스템에 대하여 골드심을 이용하여 개발된 확률론적 평가 프로그램을 이용하여 폐쇄후 방사선적 안전성 평가를 수행하였다. 처분장으로부터 핵종이 유출되어 다양한 처분 시스템 내 매질을 이동하는 것에 관련된 정상 시나리오에 대한 평가를 위하여, 평가 결과에 대한 민감도나 일반적으로 불확실성의 범위가 큰 입력자료 중 주요하다고 판단되는 파라미터를 9개로 선정하여 평가에 고려된 핵종 중 Tc, Sn, Pa, Cs 4개의 원소에 대하여 평가 결과를 논의해 보았다. 확률론적 안전성 평가와 함께 이들 각 입력 자료에 대한 최종 방사선 피폭선량에 대한 민감도도 분석하여 결과에 대한 각 입력 파라미터의 중요도도 비교하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.184.1-184.1
• /
• 2010

In order to research the way to evaluate wind resource without actual Met Mast data, this paper has been carried out on the southeastern region of Jeju island, Korea. Although wind turbine has been an economical alternative energy resource, misjudging the prediction of lifetime or payback period occurs because of the inaccurate assessment of wind resource and the location of wind turbine. Using WindPRO(Ver. 2.7), a software for wind farm design developed by EMD from Denmark, wind resources for the southeastern region of Jeju island was analyzed, and the performance of WindPRO prediction was evaluated in detail. Met Mast data in Su-san 5.5Km far from Samdal wind farm, AWS in Sung-san 4.5km far from Samdal wind farm, and Korea Wind Map data had been collected for this work.

• Nuclear Engineering and Technology
• /
• 제31권6호
• /
• pp.23-38
• /
• 1999

This study addresses the reference spent fuel and its characteristics for developing a geological repository concept. As a disposal capacity of the reference repository system to be developed, spent fuel inventories were projected based on the basis of the Nuclear Energy Plan of the Long-term National Power Program. The reference spent fuel encompassing a variability in characteristics of all existing and future spent fuels of interest was defined. Key parameters in the reference fuel screening processes were the nuclear and mechanical design parameters and the burnup histories for existing spent fuels as of 1996 and for future spent fuels with the more extended burnup the initial enrichment and its expected turnup. The selected reference fuel was characterized in terms of initial enrichment, bumup, dimension, gross weight and age. Also the isotopic composition and the radiological properties are quantitatively identified. This information provided in this study could be used as input for repository system development and performance assessment and applied in fuel material balance evaluation for the various types of back-end fuel cycle studies.