• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1170-1171
• /
• 2008

Microsources supply high quality power from 1kW to a matter of MW with higher reliability and energy efficiency than the existing large power facilities. In this paper, we designed dynamic modeling of Microturbine and Fuel cell being worthy as a small distributed energy source. Using EMTP we designed the dynamic modeling and confirmed characteristics of steady-state and dynamic analysis. In this paper, we designed dynamic modeling of Microturbine and Fuel cell being worthy as a small distributed energy source and analyzed dynamic characteristics corresponding to load variation.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.340-345
• /
• 1996

Because of limited resources of time and information processing capability during abnormal situation, diagnosis is difficult tasks in nuclear power plant (NPP) operators. Moreover since minimizing of adverse consequences according to process abnormalities is vital for the safety of NPP, introducing of diagnosis support systems have particularly emphasized. However, considerable works to develop effective diagnostic support system are not sufficiently fulfilled because of the complexity of NPP is one of the major problems. To cope with this complexity, a lot of model-based diagnosis support systems have considered and implemented worldwide. In this paper, as a prior step to development of model-based diagnosis support systems, primary side of pressurized water reactor is functionally modeled by multilevel flow modeling (MFM) concept. MFM is suitable for complex system modeling and for diagnosis of abnormalities. Furthermore, knowledge-based diagnosis process, of NPP operator could be supported because this diagnosis strategy can represent operator's one.

• Bulletin of the Korean Chemical Society
• /
• 제22권3호
• /
• pp.293-297
• /
• 2001

The purpose of this paper is to introduce the simplified linkage position determination method using tandem mass spectrometry combined with molecular modeling study. Using low energy tandem mass spectrometric experiments and molecular modeling, it has been suggested that significant differences in glycosidic bond cleavage may occur due not only to ionic considerations but also may have contributions from steric hindrance of the absorbance of collision energy, leading to a statistically higher bond cleavage for sterically crowded linkages. Permethylated derivatives of the linkage-isomeric trisaccharides give useful fragmentation ratios and productions, including a 3-linkage specific ion. The ratios of fragment ions are related to the ability of each linkage position in the oligosaccharide to absorb collisional energy.

• 디지털융복합연구
• /
• 제9권6호
• /
• pp.27-37
• /
• 2011

본 연구에서는 에너지 관리 시스템의 기능 요건을 정립하기 위한 하향식 기능 분석 절차를 제안하고 바람직한 기능 요구사항들을 도출하였다. 하향식 기능 분석을 위해 벤치마킹 대상인 에너지관리 시스템 제품들이 제공하는 공통된 기능들을 추출하고 이들을 기능 그룹 단위로 집합하여 7개의 서브시스템으로 분화하고 각 서브시스템 내에서 제공해야 할 기능들을 분류하여 비교용 템플리트를 만들었다. 벤치마킹은 이 비교용 템플리트에 의거하여 각 상용 제품에서 제공하는 기능들을 분류하여 기능 제공 유무를 기입하는 방법으로 수행되었다. 벤치마킹의 결과로 에너지 관리 시스템이 갖추어야 할 바람직한 기능들을 추출하여 이를 상세하게 설명하였다. 이 연구의 결과는 에너지관리 시스템을 개발하거나 도입하려는 관련자들에게 에너지 관리 시스템이 갖추어야 할 필요 기능에 관한 유용한 정보를 제공한다.

• 문화기술의 융합
• /
• 제3권1호
• /
• pp.43-48
• /
• 2017

본 연구는 에너지 변환을 가하면 피부에 기능별 투과와 전달현상의 변화를 확인한다. 주어진 에너지의 변화로 피부에 진행되는 과정과 에너지 전달에 투과조절의 단계로 흐르는 과정을 구성하고, 알고리즘을 통하여 변화의 과정을 모델링한다. 에너지양의 조절과 과정의 처리를 모델링한 상태에서 피부의 표피 진피에 효과적 단계로 자동 조절 및 국부 조절을 통한 시스템 모델을 구성하였다. 에너지 변환에 따른 고정된 위치와 계획된 장치로 재현하는 에너지 조절기능이 크기 형태 조합을 변환시키는 모형으로인한 깊이에 따른 분포의 변화가 정확하게 얻어지도록 투과펄스시스템을 구성하였다. 따라서 효율적인 에너지 변환을 제어하는 전달시스템을 구성하기위해 변환모델을 세분화하여 구축하였다. 이를 통하여 피부효과에 기능적 에너지 조절이 가능한 투과 조절시스템이 구성되어 지속적인 피부의 개선효과가 진행 될 것으로 예상된다.

• 한국CDE학회논문집
• /
• 제15권4호
• /
• pp.289-296
• /
• 2010

Energy consumption by buildings accounts for a large part of the world‘s energy consumption. Methods to analyze building energy consumption before construction have been studied for decades. With BIM (Building Information Modeling) technology, architects can easily export building information to data models in order to analyze the design‘s effect on building energy efficiency. Although several BIM-based energy simulation applications are currently available, utilizing these applications for energy efficiency simulation is difficult. In this paper, by comparing existing BIM-based energy applications, the authors test the building energy efficiencies estimated by some BIM models, offer ideas and solutions to problems that appeared during the test process and propose new methods for BIM-based energy evaluation based on quantitative factors.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.502-505
• /
• 2012

This study suggested 'Environmental Friendly City Model' and 'Energy Planning Process' according to the increasing necessity of 'Energy Saving Green City and 3 technologies like (1)Urban Spatial Modeling, (2)Urban Energy Consumption, (3)Urban Energy Supply Planning technologies were suggested which are able to support sustainable urban energy planning'. The results are as follows. (1)E-GIS modeling system was suggested as a 'Planning Supporting System'. (2)Urban Energy Consumption Algorithm was systemized with planning information of E-GIS DB. (3)Urban Energy System Location was deduced by integrating E-GIS DB and ANN algorithm.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.267-273
• /
• 2013

Early design phase energy modeling is used to provide the design team with first order of magnitude feedback about the impact of various building configurations. For better energy-conscious and sustainable building design and operation, the construction of BIM data interoperability for energy performance assessment in the early design phase is important. The purpose of this study is to suggest construction of BIM data interoperability for energy performance assessment based on BIM. To archive this purpose, the authors have investigated advantage of BIM-based energy performance assessment through comparison with traditional energy performance assessment and suggested requirement for construction of open BIM environment such as BIM data creation, BIM data software practical use, BIM data application and verification. In addition, the authors have suggested BIM data interoperability and BIM energy property mapping method focused on materials.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1128-1129
• /
• 2008

The detailed modeling method of photovoltaic (PV) module are useful to perform detailed analysis of PV array performance for changing meteorological conditions, verify actual rated power of PV system sizing and, determine the optimal design of PV system and components. This paper investigates a modeling approach of PV module performance in terms of irradiance and temperature changes and compared measured with simulated value of PV modules.

• Nuclear Engineering and Technology
• /
• 제34권6호
• /
• pp.610-618
• /
• 2002

A study of the conceptual data modeling to realize the decommissioning database on the HRR-1&2 was carried out. In this study, the current state of the abroad decommissioning database was investigated to make a reference of the database. A scope of the construction of decommissioning database has been set up based on user requirements. Then, a theory of the database construction was established and a scheme on the decommissioning information was classified . The facility information, work information, radioactive waste information, and radiological information dealing with the decommissioning database were extracted through interviews with an expert group and also decided upon the system configuration of the decommissioning database. A code which is composed of 17 bit was produced considering the construction, scheme and information. The results of the conceptual data modeling and the classification scheme will be used as basic data to create a prototype design of the decommissioning database.