• Korean Journal of Community Nutrition
• /
• v.23 no.6
• /
• pp.516-524
• /
• 2018

Objectives: This study assessed the accuracy of the 24-hour diet recall method for estimating the energy intake of elderly men using the doubly labeled water as a reference method. Methods: Seventeen subjects (mean age $72.5{\pm}3.9years$), who maintained the same body weight during the two weeks study period, were included in this study. Three 24-hour diet recalls (two weekdays and one weekend) were obtained over a 14 day period to estimate the mean energy intake. The total energy expenditure was measured over the same 14 days using the doubly labeled water method. The total energy intake and total energy expenditure were compared by paired t-test. Results: The total energy intake from the 24-hour diet recalls method was $2536.7{\pm}350.6kcal/day$, and the total energy expenditure from the doubly labeled water method was $2659.8{\pm}306.8kcal/day$. The total energy intake was slightly under-reported by $-123.2{\pm}260.8kcal/day$ (-4.4%). On the other hand, no significant difference was observed between the total energy intake and total energy expenditure of the subjects (p=0.069). The percentage of accurate predictions was 64.7%. The correlation between the total energy intake and total energy expenditure was statistically significant (r=0.697, p<0.005). Conclusions: The present study supports the use of the 24-hour diet recall method to estimate the mean energy intake in elderly men group. More studies are needed to assess the validity of 24-hour diet recall method in other population groups, including elderly women, adults and children.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.8
• /
• pp.374-383
• /
• 2001

This paper presents the torque estimation scheme by Energy Conversion Method (ECM) that can be applied to the torque control of switched reluctance motor. There are two types of torque estimation method by ECM. One is the method using mechanical output energy and another is that using co-energy. When the torque is estimated by ECM, the estimated flux linkage can be obtained by voltage equation and Luenberger observer. By comparing the torque estimated by ECM with that be FEM, we verify the feasibility of the proposed torque estimation by ECM.

• Journal of Drive and Control
• /
• v.9 no.2
• /
• pp.15-20
• /
• 2012

Pneumatic cylinder meter-out driving apparatus is used widely because it is clean, lightweight, and can be easily serviced. In this study an estimation method of energy consumption for pneumatic cylinder meter-out driving apparatus is proposed. The proposed method is derived from state equation and energy equation of air, and, the equation of motion of a moving part of a pneumatic cylinder reflecting the characteristics of the meter-out driving. The effectiveness of the proposed method is proved by simulation study and it demonstrates that the proposed method can evaluate the energy consumption quickly and easily when the parameters of the driving apparatus are changed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.136.1-136.1
• /
• 2011

An energy modeling analysis method currently has been considered as a new approach for energy policy research, because the importance of renewable energy use has been emphasized more and more. This study used RETScreen model as a clean energy decision making methodology for adaptation to climate change and elimination of various pollutions. This modeling method includes five step standard analysis; energy model, cost analysis, GHG analysis, financial analysis, and sensitivity & risk analysis and it also assesses both conventional and modern energy sources and technologies. This methodology for the photovoltaic(PV) energy modeling is used to evaluate the energy production, financial performance and GHG emissions reduction of photovoltaic projects. In addition, the PV application systems are classified into three basic applications; On-grid system, Off-grid system and water pumping system. This study assesses the renewable energy techno-economic modeling method with the feasibility analysis result of 10 MW PV power plant in Abu Dhabi in United Arab Emirates. Furthermore this study stresses the importance of renewable energy model research by applying to domestic PV power plant which is now in preparation.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.9 no.1
• /
• pp.1-7
• /
• 2013

With the architectural energy saving technique such as building insulation, airtightness etc., changing the indoor temperature and shortening the air conditioning time etc. are the good methods to practice energy saving in our lives. This study aims to seek a way to realize energy saving under investigation through a questionnaire survey about energy consumption condition and energy saving perception. 93% of the respondents recognized the need for energy saving, and 67% said more energy saving would possible in homes. Viable energy saving way was questioned by five steps method. More than 50% responded 'possible' or 'seems possible' at most of the items. Whereas less than 50% responded 'possible' or 'seems possible' at the items of 'lessening the cooling time' and 'lessening the shower time'. Ages of 50s who responded 'possible' or 'seems possible' was relatively less compared to 30s and 40s.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.2
• /
• pp.42-49
• /
• 2013

Recently, the attention to renewable energy has increased globally because of the environmental issue and the global energy crisis. Accordingly, south korea is focused on increasing the renewable energy usage. And the government enforced a law to the public buildings to install the renewable energy facilities. In this study, the building to evaluate renewable energy consumption and supply ratio was selected. This building has 9.79% of renewable energy supply ratio by PV system. In this study, the method for improving renewable energy supply ratio was analyzed using additional PV system. And The 5 methods to increasing electricity were evaluated. The method of increase 4.24 times PV arrays area is most efficient way to increase the renewable supply ratio. The case 1, show that the increasing renewable energy supply ratio of 39.2% compared to exsiting PV system. The result of the above, consider the additional supply of renewable energy.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.7
• /
• pp.917-925
• /
• 2014

An accurate feed formulation is essential for optimizing feed efficiency and minimizing feed cost for swine and poultry production. Because energy and amino acid (AA) account for the major cost of swine and poultry diets, a precise determination of the availability of energy and AA in feedstuffs is essential for accurate diet formulations. Therefore, the methodology for determining the availability of energy and AA should be carefully selected. The total collection and index methods are 2 major procedures for estimating the availability of energy and AA in feedstuffs for swine and poultry diets. The total collection method is based on the laborious production of quantitative records of feed intake and output, whereas the index method can avoid the laborious work, but greatly relies on accurate chemical analysis of index compound. The direct method, in which the test feedstuff in a diet is the sole source of the component of interest, is widely used to determine the digestibility of nutritional components in feedstuffs. In some cases, however, it may be necessary to formulate a basal diet and a test diet in which a portion of the basal diet is replaced by the feed ingredient to be tested because of poor palatability and low level of the interested component in the test ingredients. For the digestibility of AA, due to the confounding effect on AA composition of protein in feces by microorganisms in the hind gut, ileal digestibility rather than fecal digestibility has been preferred as the reliable method for estimating AA digestibility. Depending on the contribution of ileal endogenous AA losses in the ileal digestibility calculation, ileal digestibility estimates can be expressed as apparent, standardized, and true ileal digestibility, and are usually determined using the ileal cannulation method for pigs and the slaughter method for poultry. Among these digestibility estimates, the standardized ileal AA digestibility that corrects apparent ileal digestibility for basal endogenous AA losses, provides appropriate information for the formulation of swine and poultry diets. The total quantity of energy in feedstuffs can be partitioned into different components including gross energy (GE), digestible energy (DE), metabolizable energy (ME), and net energy based on the consideration of sequential energy losses during digestion and metabolism from GE in feeds. For swine, the total collection method is suggested for determining DE and ME in feedstuffs whereas for poultry the classical ME assay and the precision-fed method are applicable. Further investigation for the utilization of ME may be conducted by measuring either heat production or energy retention using indirect calorimetry or comparative slaughter method, respectively. This review provides information on the methodology used to determine accurate estimates of AA and energy availability for formulating swine and poultry diets.

• Land and Housing Review
• /
• v.11 no.1
• /
• pp.95-101
• /
• 2020

In the past few decades, the global population growth and rapid economic development have resulted in significant increases in building energy consumption. To reduce greenhouse-gas emissions and building energy consumption, building materials and energy technologies must be optimized. Building retrofitting is a more efficient method than reconstruction to improve the building energy performance. In order to improve the energy performance of existing buildings, this study proposed energy-efficiency retrofit plans and derived cost-effective retrofit plan. The energy efficient retrofit method is achieved through the packaging of energy technology and the energy and cost reduction effect of the energy efficiency retrofit package are analyzed. As a result of the study, the energy-efficiency retrofit package showed an energy reduction effect of up to 60% or more and a construction cost reduction of about 30%. This study argues that optimal energy and construction cost reduction of existing buildings are possible through the packaging of energy efficiency technology.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.153-156
• /
• 1992

Transient stability analysis of Korea Electric power Corporation(KEPCO) system is conducted by time simulation method, and the method is robust and reliable. But, time simulation consumes enormous computing resources and engineering time, and it does not provide a measure of the degree of stability of the system. Therefore, this method does not apply to every changed condition appropriately and quickly in planning and operating. And Transient Energy Function (TEF) method whis can assess quickly and quantatively the degree of stability of the system and which judges the stability and the instability to analyse transient dynamic charater of the system by mutual changing kinetic energy and potential energy, is developed. TEF method analyses the first Swing transient stability of the system by using the thought that if after disturbance happening, the increase of all the rotator kinetic energy changes into the potential energy after diturbance clearing, the system is stable, otherwise the system is unstable. This paper represents the availabiIity of the TEF method by comparing with time simulation method on the two cases.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.3
• /
• pp.180-190
• /
• 2011

Efficient energy consumption is a critical factor for deployment and operation of wireless sensor networks (WSNs). To achieve energy efficiency there have been several hierarchical routing protocols that organize sensors into clusters where one sensor is a cluster-head to forward messages received from its cluster-member sensors to the base station of the WSN. In this paper, we propose a self-organized clustering method for cluster-head selection and cluster based routing for a WSN. To select cluster-heads and organize clustermembers for each cluster, every sensor uses only local information and simple decision mechanisms which are aimed at configuring a self-organized system. By these self-organized interactions among sensors and selforganized selection of cluster-heads, the suggested method can form clusters for a WSN and decide routing paths energy efficiently. We compare our clustering method with a clustering method that is a well known routing protocol for the WSNs. In our computational experiments, we show that the energy consumptions and the lifetimes of our method are better than those of the compared method. The experiments also shows that the suggested method demonstrate properly some self-organized properties such as robustness and adaptability against uncertainty for WSN's.