• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.1
• /
• pp.27-32
• /
• 1988

Electron Spectroscopy for Chemical Analysis(ESCA) allowes the determination of the elemental composition and the bonding state of the surface atomes in the interface between two materials. In the binding energies of ESCA spectrum, there are zero error, voltage scaling error and random error. Accurate analysis of the intensity energy response functions and accurate calibration of the energy scale are essential to use X-ray photoelectron spectron meter. At the results of the calibration of the ESCA spectra in the copper and cordierite (Mg2Al4Si5kO18) interfaces, the errors relative to the copper are -3.03 eV for the zero error -z,-197 ppm for the voltage scaling error -V and 6.9 meV for the random error -R. The method of the calibration is able to apply for the binding energy calibration of the another ESCA spectra.

• Solar Energy
• /
• v.18 no.3
• /
• pp.113-118
• /
• 1998

This project studied a new generator utilizing the Seebeck effect. The major objective of this study was to prove the baseline concept through experimental studies. The important results from this study included design and fabrication of a laboratory scale generating system. The generating capacity of the TE-generator was 500Watt. The preliminary testing results showed the system efficiency of close to 20%. The experimental testing system has been built to include heating element, circulation pump and the instrumentation system included watt-hour meter, temperature sensor, and data acquisition system by the Hewlett-Packard 75000 Series.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.749-752
• /
• 2012

Recent social issues is energy issues, green computing has attracted attention. Active research on the power consumption of computer profiling is one of the various approaches for green computing. As a representative tool PowerAPI, PowerTop, JouleMeter, pTop, and EnergyChecker. These studies can be used to measure the power consumption of each computer device because it is based on a pure software. Based on this profiling process at the level of power consumption by performing the power consumption of each program can be analyzed. Therefore to identify the processes that consume a lot of power and control the total power consumption by reducing, also when designing the program, based on data profiling power enables the design of low-power programs, and ultimately can be oriented green computing. In this paper, by comparing and analyzing the associated representative studies, the ideal process level will draw on the characteristics of the power consumption profiler.

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.455-465
• /
• 2009

In this study, Organo-montmorillonite(MMT) was synthesized by intercalation of various amine(Octylamine, Dodecylamine, Dimethyldodecylamine, Octadecylamine) compounds into layered silicate. Natural Rubber(NR)/MMT nanocomposites were prepared by reinforcement of Organo-MMT. X-ray diffraction(XRD) and Scanning electron microscope(SEM) were employed to characterize the layer distance of Organo-MMT and the morphology of the NR/MMT nanocomposites. The structures of the synthesized Organo-MMTs were analyzed by the measurement of FT-IR. Cure characteristics, surface free energy and mechanical properties such as tensile strength, modulus and hardness of NR/MMT nanocomposites were carefully studied by contact angle meter, ODR, UTM, and hardness tester. FT-IR analysis showed a insertion of the alkyl and amine chains into the interlayers of the MMT. It was shown that the cure time of the organo-MMT was more decreased than that of $Na^+$-MMT. Surface free energy and tensile strength of the NR/DDA-MMT nanocomposite were the highest. NR/ODA-MMT nanocomposite was the highest in hardness.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.5
• /
• pp.23-31
• /
• 2014

This study was accomplished to get the foundation design data of VMD(Vacuum Membrane Distillation) system for Solar Thermal VMD plant. VMD experiment was designed to evaluate thermal performance of VMD using PVDF(polyvinylidene fluoride) hollow fiber hydrophobic membranes. The total membrane surface area in a VMD module is $5.3m^2$. Experimental equipments to evaluate VMD system consists of various parts such as VMD module, heat exchanger, heater, storage tank, pump, flow meter, micro filter. The experimental conditions to evaluate VMD module were salt concentration, temperature, flow rate of feed sea water. Salt concentration of feed water were used by aqueous NaCl solutions of 25g/l, 35g/l and 45g/l concentration. As a result, increase in permeate flux of VMD module is due to the increasing feed water temperature and feed water flow rate. Also, decrease in permeate flux of VMD module is due to increasing salinity of feed water. VMD module required about 590 kWh/day of heating energy to produce $1m^3/day$ of fresh water.

• Journal of Korea Multimedia Society
• /
• v.22 no.3
• /
• pp.366-373
• /
• 2019

The development of monitoring and analysis systems to increase productivity while saving energy is needed as a method to reduce huge amount of energy consumed in the process of producing large forged products. In this paper, we propose a system to monitor and analyze energy usage in real-time collected from gas-meter, wattmeter, and thermometer based on IoT installed in forging factories. The system consists of a data collection server for collecting and processing data from IoT- based platform and existing SCADA equipment and ERP/MES system in forging factories, and an application server for providing services to users. To develop the system, the overall system structure is logically diagrammed, and the databases configuration and implementation modules to efficiently store and manage data are presented. In the future, the system will be utilized to reduce energy consumption by analyzing energy usage pattern and optimizing process works with real-time energy usage and production process data for each facility.

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.273-280
• /
• 2014

The spectrum weighted responses of various detectors were calculated to provide guidance on the proper selection and use of survey instruments on the basis of their energy response characteristics on the neutron fields. To yield the spectrum weighted response, the detector response functions of 17 neutron-measuring devices were numerically folded with each of the produced calibration neutron spectra through the in-house developed software 'K-SWR'. The detectors' response functions were taken from the IAEA Technical Reports Series No. 403 (TRS-403). The reference neutron fields of 21 kinds with 2 spectra groups with different proportions of thermal and fast neutrons have been produced using neutrons from the $^{241}Am$-Be sources held in a graphite pile, a bare $^{241}Am$-Be source, and a DT neutron generator. Fluence-average energy ($E_{ave}$) varied from 3.8 MeV to 16.9 MeV, and the ambient-dose-equivalent rate [$H^*(10)/h$] varied from 0.99 to 16.5 mSv/h.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.2
• /
• pp.197-205
• /
• 2009

In future digital environment, energy management system will meet the real-time capability to process the emergency events, unexpected blackouts or over-load, and the high speed to provide the consumer service events such as remote meter reading. According to, energy management system needs the simple and independent information exchange model which can transmit various energy event information in real-time. In this paper, we developed an esXML that was divided into two modelings, device modeling and event modeling, based on XML using object-oriented modeling. As a result of experiments, the system was able to exchange information independently and efficiently.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1391-1393
• /
• 2002

There arc some problems on storage batteries which are called Secondary Battery, such as long charging time, limited cycle life, low coulomb efficiency and inaccurate residual power meter. To solve those problems, a complex system of capacitors and Super Capacitors of increased energy density. Though the capacitors alone arc not capable of delivering stable output, the accompanied circuits compensate the various characteristics all through the charge-and discharge-cycle. This paper deals with Energy Storage System with Super Capacitor for PV System Discussed in this paper are, explains the accompanied circuits of Super Capacitor which is compared with the Second Batteries.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.6
• /
• pp.24-30
• /
• 2013

This paper studies the comparative analysis on two different internal cushion devices (the types of needle and relief valve) used to absorb the energy which is generated when the pneumatic cylinder moves with the load at meter-out speed control system. The effect at varying the piston velocity under same driving condition is mainly investigated. The simulation results on pressure in the cushion chamber and the dynamic behavior of the relief valve type cushion device are compared with the needle valve type. Design and performance are improved with the cushion configuration of better quality at high-speed pneumatic cylinder. Based on the relation between absorbed energy and impact energy at cushion process, cushion performance at pneumatic cylinder is evaluated.