• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.58-60
• /
• 1998

The precise measurement of consumed power during the given time is very important in the energy management aspect. Up to days, induction watthour meter has been designed for use in the alternating circuits in which the voltage and current are essentially sinusoidal. The use of switching elements in power system causes the current or voltage involving harmonics. Therefore the registration error is caused by harmonics in the equipment for measuring power. This paper presents the registration error of the induction watthour meter in the presence of harmonic distortion. The accuracy of a watthour meter on loads in which the input source is not sinusoidal is investigated. And the effects of individual harmonic are reported by experiment.

• 전기학회논문지
• /
• 제63권5호
• /
• pp.713-718
• /
• 2014

DC urban railway power system consists of DC power network and AC power network. The DC power network supplies electric power to railway vehicles and the AC power network supplies electric power to station electric equipment. Recently, because of power consumption reduction and peak load shaving, intelligent measurement of regenerative energy and renewable energy adapted on DC urban railway is required. For this reason, DC smart metering system for DC power network shall be developed. Therefore, in this paper, DC voltage sensor, current sensor, and DC smart meter were developed and evaluated by performance test. DC voltage sensor was developed for measuring standard voltage range of DC urban railway, and DC current sensor was developed as hall effect split core type in order to install in existing system. DC smart meter possesses function of general intelligent electric power meter, such as measuring electricity and wireless communication etc. And, DC voltage sensor showed average 0.17% of measuring error for 2,000V/50mA, and current sensor showed average 0.21% of measuring error for ${\pm}2,000V/{\pm}4V$ in performance test. Also DC smart meter showed maximum 0.92% of measuring error for output of voltage sensor and current sensor. In similar environment for real DC power network, measuring error rate was under 0.5%. In conclusion, accuracy of DC smart metering system was confirmed by performance test, and more detailed performance will be verified by further real operation DC urban railway line test.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.311.2-311.2
• /
• 2007

• Nuclear Engineering and Technology
• /
• 제47권7호
• /
• pp.939-944
• /
• 2015

The calibration methods of neutron-measuring devices such as the neutron survey meter have advantages and disadvantages. To compare the calibration factors obtained by the shadow cone method and semi-empirical method, 10 neutron survey meters of five different types were used in this study. This experiment was performed at the Korea Atomic Energy Research Institute (KAERI; Daejeon, South Korea), and the calibration neutron fields were constructed using a $^{252}Californium$ ($^{252}Cf$) neutron source, which was positioned in the center of the neutron irradiation room. The neutron spectra of the calibration neutron fields were measured by a europium-activated lithium iodide scintillator in combination with KAERI's Bonner sphere system. When the shadow cone method was used, 10 single moderator-based survey meters exhibited a smaller calibration factor by as much as 3.1-9.3% than that of the semi-empirical method. This finding indicates that neutron survey meters underestimated the scattered neutrons and attenuated neutrons (i.e., the total scatter corrections). This underestimation of the calibration factor was attributed to the fact that single moderator-based survey meters have an under-ambient dose equivalent response in the thermal or thermal-dominant neutron field. As a result, when the shadow cone method is used for a single moderator-based survey meter, an additional correction and the International Organization for Standardization standard 8529-2 for room-scattered neutrons should be considered.

• 한국인터넷방송통신학회논문지
• /
• 제20권2호
• /
• pp.1-11
• /
• 2020

스마트 그리드 환경의 중요한 기본 구성 요소라 할 수 있는 스마트 미터기는 유틸리티 기관에게 실시간 전력소비 정보를 제공한다. 그렇지만, 스마트 미터기에 의한 전력 소비 데이터 집계 과정에서 정보 보안 및 사생활 보호를 보장하는 작업은 쉽지 않다. 최근 몇 년 동안 특정 소비자의 전력 소비 정보 추출을 방지하는 정보 보안 데이터 집계 프로세스에 관해 많은 연구가 있었으나 대부분 내부 공격자로부터 안전하지 않거나 데이터 무결성을 제공하지 못하고 있다. 게다가, bilinear pairing 또는 hash-to-point 작업이 스마트 미터기에서 수행되기 때문에 계산 비용이 만족스럽지 않은 상황이다. 현재 에너지 공급 회사, 신생 기업, 기술 개발자, 금융 기관, 국가 정부 및 학계에서 큰 관심을 끌고 있는 기술로 블록체인 또는 분산 원장 기술이 활발히 연구되고 있다. 특히, 전력 소비 네트워크와 관련하여 블록체인은 상당한 이점과 혁신을 가져올 것으로 소개되고 있다. 이에 본 연구에서는 블록체인 기술을 사용한 분산된 전력 소비 정보 보호 및 보안 미터 데이터 집계 시스템을 제안하고, 손쉽게 구현할 수 있는 자바 프로그램을 나타낸다. 여기에서 스마트 미터 데이터는 계층적 Merkle 트리에 의해 집계 및 검증되며, 비잔틴 결함 허용 프로토콜에 의한 합의 방식이 지원된다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제39권3호
• /
• pp.435-441
• /
• 2016

현재 시중에 설치되어 있는 의료용 X선 장치는 선량표시를 할 때 일반적으로 DAP(Dose Area Product) meter를 부착한다. 그러나 DAP meter가 전부 수입에 의존하고 있기 때문에 고가의 설치 비용 등의 문제가 있다. 본 연구에서는 서울시의 지원을 받아 순수 국산기술의 DAP meter 프로토타입을 제작하였고, 이 프로토타입의 성능을 독일산 I사의 제품과 비교하여 평가하였다. 평가 항목은 전자포집효율, 선량의존성, 선질의존성, 재현성, 자체흡수율, 광투과율 6개 항목으로 IEC 60580를 평가 기준으로 삼았다. 평가 결과 전자포집효율이 고유오차 9.5%, 선량의존성이 선형성 99%, 재현성이 변동계수 2%, 자체흡수율이 9%로 각각 합격기준을 만족시켰으나, 선질의존성이 변동한계 29%, 광투과율이 55%로 합격기준에 미달하였다. 아직 프로토타입이기에 앞으로 개선될 여지가 많다. 회로부터 재료까지 국산기술로 개발하고 있기 때문에 합격 기준에 미달하는 항목은 추후 해결 가능할 것으로 사료된다.

• 설비공학논문집
• /
• 제28권10호
• /
• pp.414-419
• /
• 2016

Air flow measurement is a fundamental and important task for testing, adjusting, and balancing of HVAC system. However, it is difficult to carry out in the field due to the large size and weight of the flow meter. In this study, for the purpose of developing a small and portable flow meter, we proposed a different method of static pressure measurement and verified it experimentally. In the proposed method, static pressure difference was measured by inserting a tube inside the chamber before and after the nozzles. The results were compared with measurements according to the ANSI/ASHRAE standard. The results were in good agreement, indicating that the inserted tube method could be used for static pressure measurement of a portable flow meter. The proposed method eliminates the pressure tubes that are attached outside, which results in smaller size and easy handling.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.170-170
• /
• 2010

The energy conversion from the temperature difference between hot and cold source like ocean thermal energy conversion (OTEC), requires a long and large-diameter pipe (about 1000 to 10,000 meters long) to reach the deep water. The pipe diameter ranges from 2.8 meter for proposed early test systems, to 5 meter for large, commercial power generation systems. The pipe must be designed to resist collapsing pressures produced by water temperature and density differences, and the reduced pressure required to induce flow up the pipe. Other design considerations include the external-drag effect on the pipe due to ocean currents, and the wave-induced motions of the platform to which the pipe is attached. Various approaches to the pipe construction have been proposed, including aluminum, steel, concrete, and fiberglass. More recently, a flexible pipe construction involving the use of fiberglass reinforced plastic has been proposed. This report presents the results of a scaled fixed cold water pipe (CWP) model test program performed by EES(Engineering Equation Solver) to demonstrate the feasibility of this pipe approach.

• Advances in environmental research
• /
• 제6권2호
• /
• pp.139-146
• /
• 2017

The purpose of this study was to determine the present air pollutant concentrations and predicted levels for next 30 years in urban environment of Karachi city. For that, a total of fifty measurements were made for each twenty selected locations of the city. The locations were selected on the basis of land use pattern such as residential, commercial, industrial settlements, open areas, congested traffic and low traffic areas for investigation of air pollutants variability and intensity. The measurements were taken continuously for six months period using PM Meter, Model AEROCET 531 and Ambient Air Quality Meter, Model AAQ 7545. The concentration of air pollutants were found higher at Al Asif Square and Maripur Road due to higher intensity of traffic and at Korangi Crossing because of industrial areas. The level of pollutants was lower at Sea View owing to lower traffic congestion and transportation of pollutants by sea breezes.

• 한국지리정보학회지
• /
• 제15권3호
• /
• pp.148-157
• /
• 2012

최근 에너지의 무분별한 소비에 따른 유한에너지 부족으로 인하여 지구온난화 발생 등 지구환경이 변화함으로써 이에 대한 해결방법으로 친환경 에너지자원 확보 및 신재생에너지 자원량에 대한 국민들의 관심이 증대하고 있다. 본 연구에서는 최근 각광받고 있는 공간정보기술과 신재생 에너지인 태양광 에너지 분야에서의 활용 가능성을 타진하고자 LiDAR 데이터를 이용한 태양광에너지 자원도를 제작하였다. 연구 대상지는 경상북도에 위치하고 있는 울릉군의 울릉도를 선정하였다. 울릉군 지역의 항공 라이다(LiDAR : Light Detection And Ranging) 신규 촬영 및 자료처리를 통하여 1m급 등고선을 생성하였으며, 이를 활용하여 1m급 수치표고모델(Digital Elevation Model) 자료를 구축하였다. DEM 자료를 이용하여 태양 고도 및 방위각에 따른 태양광 입사범위를 파악하여 태양광에너지 평가 기술에 활용하였으며, 1m급의 정밀하고 정확한 공간해상도 자료를 기반으로 태양광에너지 자원도를 제작함으로써 보다 정확한 정보 반영과 과학적이고 합리적인 신재생에너지 자원량 평가 방법 제시가 가능할 것으로 기대된다.