• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.392-402
• /
• 2019

This study interpreted the characteristics of the site and provenance of raw material by performing material characteristics analysis of the slags and tuyeres excavated from the Sinpung site in Wanju, Jeollabuk-do. The major chemical compositions suggested that the slags and tuyeres were created when Cu-Sn-Pb was alloyed. Metal microscope and scanning electron microscopy-energy dispersive spectrometer analyses revealed that the slags and tuyeres were by-products formed in the alloying process. This alloy, created by adding galena to copper and tin ingots, was an intermediary material used in making the finished products. According to the lead isotope ratio analysis result, slags could be made using galena of the southern Zone III region of Korea. Based on the decomposition of mica group minerals and the formation of mullite detected through X-ray diffraction analysis, it is possible to conclude that the tuyeres operated at approximately 1,000℃ as, the mullite was detected on the outside of the tuyeres.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.3
• /
• pp.337-343
• /
• 2020

Molar-incisor malformation (MIM) is a new type of root anomaly reported recently. The characteristics of MIM are dysplastic root formations, constriction of pulp chambers and presence of calcified matrices at the level of cementoenamel junction in permanent first molars and primary second molars. In some cases, permanent maxillary incisors are also affected. The permanent first molars of the patient in this case report were affected with MIM. Generalized pulp stones were observed in overall primary dentition. Micro-computed tomography (micro-CT) imaging and scanning electron microscope-energy dispersive X-ray spectrometer analysis were performed on the extracted mandibular first molar and maxillary primary second molar of the patient. Micro-CT images revealed the discontinuity of enamel directly connected to an accessory canal of the root.

• Clean Technology
• /
• v.17 no.4
• /
• pp.300-305
• /
• 2011

A mixture of supercritical carbon dioxide and a co-solvent was employed to strip a high-dose ion-implanted photoresist (HDIPR) from the surface of semiconductor wafers. The stripping efficiency was highly improved by the physical force generated from a ultrasonication tip inside the reactor. In addition, helium gas was injected in the reactor as a barrier gas before the introduction of pure supercritical $CO_2$ ($scCO_2$), which reduced the rinsing time significantly. The effect of co-solvents on the stripping efficiency was investigated. The wafer surfaces were analyzed by scanning electron microscopy and by an energy dispersive X-ray spectrometer.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.153-164
• /
• 2019

To develop a high performance SCR catalyst which has better specific surface area, lightness of weight and fast temperature response than those of existing commercial SCR catalyst, metal foam type SCR catalysts were prepared by washcoating with vanadium, tungsten and binder. The de-NOx performance test of the prepared catalysts was carried out on atmospheric micro-test unit at lab. scale according to space velocity variation and temperature change, and the characteristics of them were analyzed by Porosimeter, SEM(scanning electron microscope), EDX(energy dispersive x-ray spectrometer), ICP(inductively coupled plasma) and Stereomicroscope. The NOx reduction performance decreased as the space velocity increased and was found to be the best at 3.5 wt.% contents of the vanadium and tungsten. It was found that the larger amount of binder was added, the worse the NOx reduction performance was, which was considered to be that the number of active sites of the prepared catalyst surface was occupied by the binder. We found that the amount of binder to be added to prepare the catalyst should be properly controlled by the condition of coated catalyt surface.

• Clean Technology
• /
• v.15 no.2
• /
• pp.69-74
• /
• 2009

A high-dose ion-implanted photoresist (HDIPR) was stripped off from the surface of a semiconductor wafer by using a mixture of supercritical carbon dioxide and a co-solvent. The additional ultrasonication improved the stripping efficiency remarkably and thus reduced the stripping time by supplying physical force to the substrate. We investigated the effect of co-solvents, co-solvent concentration, and stripping temperature and pressure on the stripping efficiency. The wafer surfaces before and after stripping were analyzed by scanning electron microscopy and by an energy dispersive X-ray spectrometer. The HDIPR could be stripped off completely in 3 min with 10%(w/w) acetone/sc$C0_2$ mixture at 27.6 MPa and 343 K.

• Journal of Convergence for Information Technology
• /
• v.12 no.2
• /
• pp.149-156
• /
• 2022

In this paper, it was attempted to form a titanium (Ti: Titanium) thin film using the atmospheric pressure plasma process technology for the conductor, which is the main component of the optical sensor. The atmospheric plasma equipment was remodeled. A 4-inch Ti target for sputter was etched using CF4 gas, and the by-product was coated on a glass sample. These by-products were formed up to about 2 cm, and could be divided into 15 areas according to color. Surface shape and constituent elements were analyzed using scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS), respectively. Electrical properties using 4-point probe equipment were also measured. If the process is performed by positioning the sample at about 4.5 mm to 5 mm from the target, a uniform Ti thin film will be deposited. However, it was found that the thin film contained a significant amount of fluorine, which greatly affects the electrical properties of the thin film. Therefore, additional experiments and studies should be performed to remove or minimize fluorine during deposition.

• Journal of the Korean Home Economics Association
• /
• v.41 no.8
• /
• pp.55-62
• /
• 2003

Natural dyes generally fan into two categories; organic dyes coming from animals and plants and inorganic dyes obtained from various minerals such as bengala, loess, ultramarine, prussian blue and etc. The main components of volcanic ash is clay mineral such as kaolinite, illite, quartz. Clay minerals Composing volcanic ash are kaolinite［$Al_4Si_4O_{10}{(OH)_{8}}$］, illite［$K_{X}Al_2(Si,\;Al)_4O_{10}{(OH)}_2$］, quartz［$SiO_2$］, homblende［$Na_{0-1}\;Ca_2{(Mg,\;Fe,\;Al)}_5{(Si,\;Al)}_{8}O_{22}{(OH)}_2$］and etc. And the redish color mainly comes from iron oxide. In this paper, two different classes of dyeing process were tested; dyeing with volcanic ash only and cationic agent pre-treatment followed by dyeing with volcanic ash. The compositions of the volcanic ash powder and the volcanic ash deposited on the cotton knitted fabrics identified by energy dispersive spectrometer and XRD analysis. The major chemical components of volcanic ash deposited on the cotton knitted fabrics were confirmed to be the saicon oxide, iron oxide, and aluminum oxide and etc. According to the analysis by XRD and EDS-SEM, kaolinite, illite and quartz were also identified.

• Korean Journal of Materials Research
• /
• v.17 no.8
• /
• pp.408-413
• /
• 2007

Process of the hydroxyapapite(HA) precipitation on bioactive titanium metal prepared by NaOH in a modified-simulated body fluid(mSBF) was investigated by high resolution transmission electron microscope (HRTEM) attached with energy dispersive X-ray spectrometer(EDX). The amorphous titanate phase on titanium surface is form by NaOH treatment and an amorphous titanate incorporated calcium and phosphate ions in the liquid to form an amorphous calcium phosphate. With increasing of soaking time in the liquid, the HA particles are observed in amorphous calcium phosphate phase with a Ca/P atomic ratio of I.30. The octacalcium phosphate (OCP) structure is not detected in HRTEM image and electron diffraction pattern. After a long soaking time, the HA particles grow as needle-like shape on titanium surface and a large particle-like aggregates of needle-like substance were observed to form on titanium surface within needle-like shape. A long axis of needle parallels to c-direction of the hexagonal HA structure.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.10
• /
• pp.1770-1778
• /
• 2001

황토는 대표적인 천연 무기염재의 일종으로서 바람에 의해 운반되어 퇴적된 담황색 내지는 황회색을 띠는 실트질의 퇴적물을 일컫는다. 황토의 구성물질은 주로 석영, 장석, 산화철광물, 깁사이트 등의 여러 가지 점토광물을 포함하는데, 주로 적색을 띠는 것은 소량의 산화철 광물에 기인되는 경우가 많으며 황토를 구성하는 점토광물로는 버미큘라이트, 카오린 광물인 캐올리나이트와 할로이사이트, 일라이트 등이 있다. 본 연구에서는 면직물에 천연 무기염재인 황토를 사용한 염색시에 황토 단독염색과 콩즙 전처리 후 황토염색으로 나누어 염색을 실시하고, 원료 황토와 황토염색 후 면직물에 부착된 성분 간에 차이가 있는지를 확인하기 위해 X선 형광분석(X-ray fluorescence analysis, XRF)을 이용하여 염색 전.후 황토의 성분을 분석하였고, X선 회절분석(X-ray diffraction analysis, XRD)을 이용하여 황토 및 염색 전 후 면직물에 부착된 광물질의 주성분을 분석하였으며, energy dispersive spectrometer (EDS)가 장착된 주사전자현미경을 이용하여 면직물에 부착된 광물의 성분을 조사하였다. 그 결과, 황토로 면직물을 염색하는 경우 면직물에 부착되는 황토의 양과 K/S 값은 거 의 비례하여 증가하는 것으로 나타났다. 황토 염색 후 면직물에 부탁되는 주성분은 주로 SiO$_2$, A1$_2$O$_3$, Fe$_2$O$_3$등인 것으로 나타났으며, X선 회절분석과 EDS분석에 의해 캐올리나이트, 일라이트 등의 점토광물의 형태로 존재하는 것이 확인되었다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.8 no.4
• /
• pp.173-180
• /
• 1997

The Mechanically Alloyed $Ti_{0.7}Mg_{0.3}Ni$ was investigated as a function of milling time by X-ray diffraction, SEM(scanning electron microscope), EDS(energy dispersive spectrometer), P-C-Isotherm curves. After 10hrs milling, mixed $Ti_{0.7}Mg_{0.3}Ni$ powders were changed to amorphous phase. And amorphous $Ti_{0.7}Mg_{0.3}Ni$ alloys became TiNi phase crystalline after heat treatment at 873K in a vacuum for 1 hour. The hydrogen absorption capacity of the annealed $Ti_{0.7}Mg_{0.3}Ni$ alloy increased as a function of mechanical alloying time.