• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.442-442
• /
• 2014

Although electrochemical capacitors (ECs), also known as supercapacitors or ultracapacitors, is one of the most promising energy-storage devices because of its high power density, super-high cycle life, and safe operation. We herein report a synthesis of graphene-based flexible films by kneading method. Thus, a device can be readily made by sandwiching a polymer membrane included ionic liquid electrolytes between two identical graphene-based flexible films. Devices made with these electrodes exhibit ultrahigh energy density values while maintaining the high power density and excellent cycle stability of ECs. Moreover, these ECs maintain excellent electrochemical attributes under high mechanical stress and thus hold promise for high-energy, flexible electronics.

• Journal of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.249-259
• /
• 1988

The solvent effects of MeOH-solvent dimers were studied via AM1 Hamiltonian and supermolecule methods. Methanol, ethanol, acetone, dimethylsulfoxide, N,N-dimethylformamide, tetrahydrofuran, dioxane, and acetonitrile were considered as solvent molecules. Optimized geometries, electron densities, molecular energies, and hydrogen-bonding energies of monomers and dimers were calculated. We found that the stabilization energies contributed to the hydrogen-bonding were decreased in the order of dimethylsulfoxide > ethanol > N,N-dimethylformamide > acetone > methanol > tatrahydrofuran > dioxane > acetonitrile, and this order was explained by using the change of electron density and energy partition functions.

• Nuclear Engineering and Technology
• /
• v.41 no.6
• /
• pp.841-848
• /
• 2009

A simple model to analyze non-linear density-wave instability in a sodium-cooled helically coiled steam generator is developed. The model is formulated with three regions with moving boundaries. The homogeneous equilibrium flow model is used for the two-phase region and the shell-side energy conservation is also considered for the heat flux variation in each region. The proposed model is applied to the analysis of two-phase instability in a JAEA (Japan Atomic Energy Agency) 50MWt No.2 steam generator. The steady state results show that the proposed model accurately predicts the six cases of operating temperatures on the primary and secondary sides. The sizes of three regions, the secondary side pressure drop according to the flow rate, and the temperature variation in the vertical direction are also predicted well. The temporal variations of the inlet flow rate according to the throttling coefficient, the boiling and superheating boundaries and the pressure drop in the two-phase and superheating regions are obtained from the unsteady analysis.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.6
• /
• pp.181-192
• /
• 2001

The power flow analysis (PFA) has been performed to analyze the vibration of coupled plates excited by a point force in an arbitrary direction. The point force generates the out-of-plane vibration associated wish flexural waves and the in-plane vibration associated with longitudinal and shear waves. The energy governing equation for each type of waves was introduced and solved to Predict the vibrational energy density and intensity generated by the out-of-plane and in-plane components of the point force in an arbitrary direction. The wave transmission approach was used to consider the mode conversion at the joint of the coupled plates. Numerical results for vibrational energy density and intensity on the coupled plates were presented. Comparison of the results by PFA with exact results showed that PFA can be an effective tool to predict the spatial variation of the vibrational energy and intensity on the coupled plates at high frequencies.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.1
• /
• pp.129-135
• /
• 2021

Recently, additive manufacturing (AM) technology such as powder bed fusion (PBF) and directed energy deposition (DED) are actively attempted as consumers' needs for parts with complex shapes and expensive materials. In the present work, the effect of processing parameters on the mechanical properties of 316L stainless steel coupons fabricated by PBF and DED AM technology was investigated. Three major mechanical tests, including tension, impact, and fatigue, were performed on coupons extracted from the standard components at angles of 0, 45, 90 degrees for the build layers, and compared with those of investment casting and commercial wrought products. Austenitic 316L stainless steel additively manufactured have been well known to be generally stronger but highly vulnerable to impact and lack in elongation compared to casting and wrought materials. The process-induced pore density has been proved the most critical factor in determining the mechanical properties of AM-built metal parts. Therefore, it was strongly recommended to reduce those lack of fusion defects as much as possible by carefully control the energy density of the laser. For example, under the high energy density conditions, PBF-built parts showed 46% higher tensile strength but more than 75% lower impact strength than the wrought products. However, by optimizing the energy density of the laser of the metal AM system, it has been confirmed that it is possible to manufacture metal parts that can satisfy both strength and ductility, and thus it is expected to be actively applied in the field of electric power section soon.

• ETRI Journal
• /
• v.42 no.3
• /
• pp.341-350
• /
• 2020

In a wireless sensor network (WSN), the data transmission technique based on the cooperative multiple-input multiple-output (CMIMO) scheme reduces the energy consumption of sensor nodes quite effectively by utilizing the space-time block coding scheme. However, in networks with high node density, the scheme is ineffective due to the high degree of correlated data. Therefore, to enhance the energy efficiency in high node density WSNs, we implemented the distributed source coding (DSC) with the virtual multiple-input multiple-output (MIMO) data transmission technique in the WSNs. The DSC-MIMO first compresses redundant source data using the DSC and then sends it to a virtual MIMO link. The results reveal that, in the DSC-MIMO scheme, energy consumption is lower than that in the CMIMO technique; it is also lower in the DSC single-input single-output (SISO) scheme, compared to that in the SISO technique at various code rates, compression rates, and training overhead factors. The results also indicate that the energy consumption per bit is directly proportional to the velocity and training overhead factor in all the energy saving schemes.

• Transactions of the Korean hydrogen and new energy society
• /
• v.1 no.1
• /
• pp.40-47
• /
• 1989

The sulfur-iodine thermochemical water splitting process of GA(General atomic) cycle was studied to produce hydrogen from water by $H_2-I_2-SO_2$ reactions. The experimental scale was 500g based on iodine. The reaction took 100 minutes, products could be separated two liquid phases due to their density difference:HI solution had a density of 2.39~2.61g/cc, and $H_2SO_4$ solution had 1.37~1.38g/cc. The condition of reaction was when weight ratio of $I_2/H_2O$ was 2/1 resulting in good phase separation and productivity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.269-269
• /
• 2013

Usingvan der Waals (vdW) energy-corrected density-functional theory without or with self-consistent screening (SCS) effects, we calculate the adsorption energy of acetylene, ethylene and benzene on Si(100). We find that vdW interactions without SCS effects increase the adsorption energy by 0.23, 0.30, and 0.64 eV for adsorbed $C_2H_2$, $C_2H_4$, and $C_6H_6$ on Si(100), respectively. However, if SCS effects are included, this increase of the adsorption energy is reduced as 0.19, 0.24, and 0.54 eV for the three adsorption systems, respectively. The resulting adsorption energy for each system is between the values computed using the local-density approximation and the generalized-gradient approximation.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.2
• /
• pp.238-243
• /
• 2013

In this paper, a novel approach for optimized installation and operations of battery energy storage system (BESS) and electric double layer capacitor (EDLC) modules for the renewable energy based intermittent generation is presented for them to be connected with an electric power grid. In order to make use of not merely the high energy density of battery but also the high power density of EDLC modules, it is very useful to devise the hybrid system which combines BESS and EDLC modules. The proposed method adopts the linear programming to calculate the optimized capacity as well as the quadratic programming to transmit the optimal operational signals to BESS and EDLC modules. The efficiency of this methodology will be demonstrated in the experimental study with the real data of wind speed in Texas.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.180-188
• /
• 2024

This research examined consumption-based carbon emission reduction by nuclear energy consumption and environmental tax while considering the context of trade globalization in the highest five emitter nations from 1990 to 2020. This study used various empirical methodologies, including preliminary analysis to check the stationarity and cointegration, the CS-ARDL for long-run analysis, CCEMG, AMG for robustness, and the D-H causality test for short-term pairwise causation. The results indicated that nuclear energy consumption, environmental tax, and trade globalization help to mitigate consumption-based carbon emissions while economic growth and population density boost carbon emissions. Furthermore, the results also found two-way casual connection exists between nuclear energy consumption, population density, and consumption-based carbon emissions. Thus, the results emphasize the need for government policies that encourage nuclear energy and environmental tax as a strategy to reduce carbon emissions and achieve and maintain environmental development.